User manual

8
9
Charging the battery
Your phone’s battery should have enough power for the phone to turn on,
nd a signal, and make a few calls. You should fully charge the battery as
soon as possible.
Warning! Use only ZTE-approved chargers and USB cables.
The use of unapproved accessories could damage your
phone or cause the battery to explode.
1. Connect the adapter to the charging/micro-USB port.
2. Connect the charger to a standard AC wall outlet. If the
phone is on, you’ll see a charging icon, such as or ,
appear in the status bar.
3. Disconnect the charger when the battery is fully charged.
Note: If the battery is extremely low, you may be unable to power
on the phone even when it is being charged. In this case, try again
after charging the phone for at least 20 minutes. Contact customer
service if you still cannot power on the phone after prolonged charging.
Extending the battery life
Active applications, screen brightness levels, Bluetooth and Wi-Fi usage, and
GPS functionality can drain your battery. You can follow these helpful tips to
conserve your battery power:
Use the Battery saver feature in Settings.
Reduce the screen backlight time.
Lower the screen brightness.
Turn auto-sync, Wi-Fi, and Bluetooth off when not in use.
Disable the GPS function when not in use. Most applications using this
function will periodically query the GPS satellites for your current location;
each query drains your battery.
GETTING STARTED
GETTING STARTED
Powering your phone on/off
Press and hold the Power key to power on your phone.
To turn it off, press and hold the Power key to open the options menu. Tap
Power off.
Note: If the phone freezes or takes too long to respond, press and hold the
Power key for about 10 seconds to restart the phone.
Setting up your phone for the rst time
When you rst power on your phone after you purchase it or reset it to factory
settings (see Settings – Personal – Backup & reset), you may need to set it up
before using it.
1. Tap the language eld to select the language you want, and tap LET’S GO.
2. Follow the prompts to set up your Wi-Fi connection, Google services, name,
device protection, and other options.
Note: Users with low vision can tap Vision Settings on the initial setup screen
to customize accessibility features.
Locking/Unlocking the screen and keys
Your phone allows you to quickly lock the screen and keys (put the phone
into Sleep mode) when not in use and also to turn the screen back on and
unlock it when you need it.
To lock the screen and keys:
To quickly turn the screen off and lock the keys, press the Power key.
Note: To save battery power, the phone automatically turns off the screen
after a certain period of time when you leave it idle. You will still be able to
receive messages and calls while the phone screen is off.
To unlock the screen and keys:
1. Press the Power key to turn the screen on.