User manual

4
2.1.2. Charging the battery
Plug the charger into the socket on the side of your phone. Connect the charger to an AC wall socket. The blinking of the battery level icon indicates the battery
is being charged. When the blinking stops, it indicates the charging is finished
During charging, the phone and charger will feel warm to the touch. This is normal.
Warning:
 The operating ambient temperature of the charger is 0C-50C. Do not use it when the temperature exceeds this limit.
 Use only chargers approved by the phone manufacturer to ensure safety. Failing to comply with this will violate the terms and conditions of the warranty.
2.2. Connecting to the Network
2.2.1. SIM card
Please insert available Subscriber Identity Module (SIM) card into your phone before using it. SIM card is supplied by your network carrier. All the information
related to network connection is recorded on the SIM card, so are the contact information such as names, phone numbers and SMS that you set to store on the
SIM. You can take out the SIM card from the phone and insert it into another GSM phone to use it. Most new phones will recognize the SIM card automatically.
2.2.2. Connecting to the network
After the SIM card is unlocked, you phone will automatically search for the registered network or other local available network. Once connected, the name of
the network carrier will appear on the top of the screen.
You phone is now in Standby mode, ready for making and receiving call
Main menu
3. Call logs
With this function, you can view the information of Missed calls、Dialed calls、Received calls、Rejected calls and also you can clean all these records via Delete
Call Logs. Enter into any history interface, Select anyone logs, Press LSK Key to enter the Option list:
 Details: View the detail of the current call.
 Call: Call the current number.
 Write message: Directly input the SMS and send it to the current number.
 Add to contacts: save to phonebook.
 Add to blacklist: Add the number to black list and block the same number to call you.
 Delete: Delete the current logs.
 Delete all: Delete all the current logs.