User manual

37
1. Swipe up on the home screen and touch Settings > Network &
Internet > Wi-Fi.
2. Slide the switch to the On position.
3. Touch Add network at the bottom of the Wi-Fi networks list.
4. Enter the network SSID (name). If necessary, enter security or
other network configuration details.
5. Touch SAVE.
Connect to a WPS network
Wi-Fi Protected Setup (WPS) is a feature that makes it easy to add
your phone to the access points which support WPS.
You can use one of the following methods to connect your phone to
a wireless network using WPS.
Method one: WPS button (Recommended)
1. Swipe up on the home screen and touch Settings > Network &
Internet > Wi-Fi.
2. Slide the switch to the On position.
3. Touch Wi-Fi preferences > WPS Push Button.
4. Press the WPS button on the access point and the access point
will recognise your phone and add it to the network.
Method two: PIN number
1. Swipe up on the home screen and touch Settings > Network &
Internet > Wi-Fi.
2. Slide the switch to the On position.
3. Touch Wi-Fi preferences > WPS Pin Entry.
4. The WPS PIN number displays on the screen. Enter the PIN
number into the access point's setup page.
After entering the PIN number, your phone automatically finds the
access point and configures the connection.
NOTE:
For detailed information about the WPS feature of the access point,
please refer to its user documents.
Forget a Wi-Fi network
You can make your phone forget about the details of a Wi-Fi network
that you added – for example, if you don’t want the phone to
connect to it automatically or if it is a network that you no longer
use.
1. Swipe up on the home screen and touch Settings > Network &