User's Manual

1. Choose Network Setting>Static Route.
2. Click Add list.
3. Set the Dest IP address and Subnet mask.
4. Select an Interface from the drop-down list.
5. If you select LAN as the interface, you need set a Gateway.
6. Click Submit. As shown in Figure 3-15.
Figure 3-15
3.7.2 Modify Static Route
To modify an access restriction rule, perform the following steps:
1. Choose Security>Static Route.
2. Choose the item to be modified, and click Edit.
3. Repeat steps 3 through 5 in the previous procedure.
4. Click Submit. As shown in Figure 3-16.
Figure 3-16