User's Manual

3.7.3 Delete Static Route
To delete a static route, perform the following steps:
1. Choose Security>Static Route.
2. Choose the item to be deleted, and click Delete.
4 Wi-Fi
4.1 WLAN Setting
This function enables you to configure the Wi-Fi parameters.
4.1.1 Setting General Parameters
To configure the general Wi-Fi settings, perform the following steps:
1. Choose Wi-Fi > Wi-Fi Settings.
2. In the General Settings area, set WLAN to Enable.
3. Set Mode to one of the values described in the following table:
Parameter Value
Description
802.11b/g/n
The Wi-Fi client can connect to the CPE in
802.11b, 802.11g, or 802.11n mode. If the
client connects to the CPE in 802.11n mode,
the Advanced Encryption Standard (AES)
encryption mode is required.
802.11b/g
The Wi-Fi client can connect to the CPE in
802.11b or 802.11g mode.
802.11b
The Wi-Fi client can connect to the CPE in
802.11b mode.
802.11g
The Wi-Fi client can connect to the CPE in
802.11g mode.
4. Set the Channel No. from 1 to 11.
5. Set the Tx Power from 20% to 100%.
6. Click Submit. As shown in Figure 4-1.