User's Manual

Figure 8-3
9 System
9.1 Maintenance
9.1.1 Restart
This function enables you to restart the CPE. Settings take effect only after the CPE restarts. To
restart the CPE, perform the following steps:
1. Choose System>Maintenance.
2. Click Restart. As shown in Figure 9-1.
The CPE then restarts.
Figure 9-1
9.1.2 Factory Reset
This function enables you to restore the CPE to its default settings.
To restore the CPE, perform the following steps:
1. Choose System>Maintenance.
2. Click Factory Reset. As shown in Figure 9-2.
The CPE is then restored to its default settings.