X992 CDMA 1X Digital Mobile Phone Manual De Usuario Copyright © 2009 by ZTE Corporation All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice.
Contents Know your Phone ................................................. 3 Key Instruction ..................................................... 4 Interface Icons ...................................................... 7 Insert and Extract UIM Card ............................... 8 Remove and Install the Battery............................. 9 Charge the Battery ............................................. 10 Power on/ off Your Phone ................................... 10 Make and Answer a Call ...........
Warranty Terms .................................................. 20 Limitation of Liability......................................... 20 FCC Regulations: ............................................... 21 RF Exposure Information (SAR).........................
Know your Phone Receiver LCD Screen Left Soft key Right Soft Key Camera OK Key Send Key End Key QWERTY Key area USB Port Number Key Volume Key T-Flash 3
Key Instruction Key Function Description Make or answer a call. Press Send key in standby mode to enter all recent calls list. Press Send key two times directly to redial the last number. End an active call or reject a call. Long press to Power on/Power off. Exit from any interface to standby mode. Enter main Menu in standby mode. Confirm the commands and options selected as OK key. Switch to the options of left bottom submenu. Erase character(s) while editing.
menu , press Up key to enter Shortcuts menu. Adjust volume in conversation. Used as direction key in games. Left /Right key Scroll the cursor left and right. Used as selection key to scroll cursor left and right for keying in commands and selecting options shown on the display. In standby mode, press Left key to enter Neo Application menu, press Right key to Neo Navigation. ~ Adjust volume in conversation. Used as direction key in games. Key in numbers or characters.
Switch input method when editing 6
Interface Icons Icon Indication Signal strength Earphone in use Keypad locked Power indicator New message Unread alarm Unread schedule Missed calls indicator Ring for incoming call Ring before vibration for incoming call Ring + Vibration for incoming call Vibration for incoming call 7
Silence for incoming call Music&FM background Alarm USB mode Connecting Bluetooth Earphones Bluetooth Open Bluetooth Transmission Push message T-flash Card inserted New MMS Insert and Extract UIM Card Power off the phone, remove the battery and other external power. Insert UIM card into UIM card slot in the phone, or remove UIM card out of slot, as shown in picture .
Remove and Install the Battery The attached Li-ion battery along with the phone can be used after unpacking. For the first three times, please use up the power and charge it fully for a new battery to perform well. Remove: (1) Put finger on the top finger grip in back-cover, and then slide the back-cover of the phone down to release and remove. (2) Put finger on the finger grip, and then lift up the battery to remove the battery.
Charge the Battery Plug out rubber away from the jack on the side of the handset and connect the lead from the charger to the socket on the side of the phone. (Note: The side with arrow should be upright while connecting). Connect the charger to a standard wall AC socket. When the charging animation on the screen stops, the charging is completed. The charging takes usually up to 2～3 hours. During charging, it is a normal phenomenon that the battery, phone and charger may get hot.
Press Right key to User Neo Navigation menu. Press Send key to enter Call history list. Hold * key to lock the keypad. Hold # key to switch the silent and general mode. Note: To “press” key in this manual means to press the key and release it. To “hold” key means to keep pressing the key for two seconds or more. Make and Answer a Call Make a call Enter the phone number Press Send key to make the call. Press End key to end the call. Answer a call Press Send key to answer the call.
2.2 Received Calls 2.3 Dialed Calls 2.4 Delete Log 2.5 Call Time 3. My File 3.1 Card 3.2 Music 3.3 Picture 3.4 Video 3.5 Other 4. Multimedia 4.1 Video Player 4.2 Audio Player 4.3 Voice Recorder 4.4 FM 5. Neo Application 6. Camera 6.1 Mode Select 6.2 Base Option 6.3 Photo Browse 6.4 Frame Options 6.5 Default Config 6.6 Switch to Camcorder 8.7 Create All.vcf 9. User Profiles 9.1 General 9.2 Meeting 9.3 Outdoors 9.4 Indoors 9.5 Silence 10. Neo Navigation 11. Messages 11.1 SMS 11.1.1 Write Message 11.1.
Voice Mail Before using Voice Mail box, please consult with service provider to confirm that the voice mailbox has been activated. The system automatically sends a message to your phone informing a new voice message. Select Connect to Voice to read the message and then dial voice mail box number to listen to your voice message. Select Edit Number to set the voice mail number.
or right Move cursor up or down Change input mode Capitalization Press Up/Down key. Press NEXT key to select another text mode. Press NEXT key to switch between capitalization and lowercase. Message 1. Select Messages in Main Menu. 2. Select Write Message to write and edit message text. 3. Select Option and press OK key to Send message or Save message in Outbox. The maximum of receivers not exceed 10 persons. Select Inbox to view messages received. Select Outbox to view the sent and saved messages.
Message phones‟ number. The message could be send to multi-receivers. Read Menu→Messages→Inbox/Outbox Read messages in Inbox/Outbox. Menu→Messages→Voice Mail Set the voice mail No. and dialing message Voice mail voice mail number, you could listen to voice message. Message Menu→Messages→Setting Setting Set SMS save position, report status, expire，message priority and view memory status. Templates Menu→Messages→Templates message Add preformatted in phone.
Ring Menu→User Set volume profiles→option→Volume Setup beep volume Ring tone Menu→User profiles→option→Tone Set the phone‟s ring tone for Setup phone‟s ring/earpiece/key incoming Caller Ring/Alarm/Power on/Power off/SMS/Key Alert type Menu→User profiles→option→Alert Set alert type of the phone. type Wall Paper Menu→Settings→Display Set wall papers as background in set Setup →Wallpaper idle state. Backlight Menu→Settings→Display Set backlight duration.
Setup→Shortcuts Auto Menu→Settings→Call Answer Answer Setting→Auto Answer automatically Time Menu→Settings→Call Setup→Time Phone alert for optional time Reminder Reminder reminding Call Menu→Settings→Call Forward an incoming call to a Forwarding Setup→ Call Divert designated number. Call waiting Menu→Settings→Call Setup Answer the second call, hold the →Call Waiting first call. Call Menu→Settings→Call Restrict calls in list.
Setting→Bluetooth and do some Bluetooth settings and operations. Calendar Menu→Tools→Calendar View calendar and make schedule events. Menu→Tools→Alarm Set alarm alert time. Calculator Menu→Tools→Calculator Execute basic math calculation. World Time Menu→Tools→World Time View world time. Notepad Menu→Tools→Notepad View/edit/delete notepad. Stopwatch Menu→Tools→Stopwatch Stopwatch timing. Alarm clock Phone Lock Phone lock could prevent your phone from illegal use.
Note: PIN code and PUK code may be offered together with the UIM card. If not, please contact with network operator. Please change default PIN code to your own as soon as possible. Warning and Maintenance • Keep the phone out of the reach of little children. The phone may cause injury if used as a toy. • Please use original accessories or accessories that are authorized by the manufacturer. • Please keep the phone dry and store in shady and cool place.
Warranty Terms The warranty does not apply to defects or errors in the product caused by: (a) Reasonable abrasion. (b) Misuse including mishandling, physical damage, improper installation, unauthorized disassembly of the product. (c) Water or any other liquid damage. (d) Any unauthorized repair or modification. (e) Power surges, lightning damage, fire, flood or other events outside ZTE‟s reasonable control. (f) Use of the product with any unauthorized third party products such as generic chargers.
with using this product, whether or not ZTE had been advised, knew or should have known the possibility of such damages. FCC Regulations: This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver.
The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. RF Exposure Information (SAR) This model phone meets the government‟s requirements for exposure to radio waves. This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.
bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The highest SAR value for the model phone as reported to the FCC when tested for use at the ear is 0.
The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID: Q78-X992.
