Mobile Hotspot USER MANUAL Z079584506204 www.zteusa.
Copyright © 2014 ZTE CORPORATION Table of Contents All rights reserved. Getting Started.....................................................................................................1 No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. The manual is published by ZTE Corporation.
Table of Contents SMS....................................................................................................................19 Operating Messages in Your Inbox....................................................................19 Device Settings..................................................................................................20 Wi-Fi ® Settings...................................................................................................21 Firewall...........................
Getting Started Getting Started ➊ ➋ ➌ ➍ ➎ ➏ ➐ ➑ ower Button: Press and hold the Power Button to power the device on or off. P Charger/Micro USB Port: Charge your device. Enter Key: Enter or select an item. Left Key: Check the on-screen menu from right to left. Right Key: Check the on-screen menu from left to right. Back Key: Go back to the previous screen. LCD Screen: Indicates the signal type, signal strength, battery, Wi-Fi, etc. microSDHC Card Slot: Insert a microSDHC card.
Getting Started Getting Started Connection Scenario Setting Up Your Device The following picture is an example of device connection. All of these devices can surf the Internet at the same time. NOTE: You can only use Wi-Fi to connect to the Z288L device. Make sure the devices you wish to connect to the Z288L device support Wi-Fi. Inserting the Battery 1. Remove the back cover. 2.
Getting Started Getting Started Inserting a microSDHC Card Charging Your Device NOTE: This device uses a microSDHC card. 1. Pull the microSDHC card cover out of the card slot. NOTE: Pull the cover gently, as it is connected to the device. You can charge your device by using the USB cable or adapter. Please charge your device for more than two hours when you use it the first time or when you haven't used it for a long time. • Use the USB cable to connect your device and PC directly.
Getting Started Connecting to Your Device 1. Power on your device. It will take 1-2 minutes to initialize. 2. Use your normal Wi-Fi application to search for available wireless networks. Getting Started 4. Your computer or other Wi-Fi enabled device will then connect to the Z288L device. NOTE: To obtain an IP address automatically, refer to the section Advanced Users—Verifying IP Address and DNS. 3. Select the SSID of your device, and then click Connect.
Navigating Your Device Press and hold the Power Button to turn on the device. The screen lights up to indicate the device has turned on, and the following icons will appear after initialization. Device Info Select and press the Enter Key to check the WAN information. Use the Left and Right keys to view the following information: • Network Name: Displays the default SSID. • Password: Displays your current password. • Web Login Screen: Displays the login URL of the web UI.
Navigating Your Device Navigating Your Device Using the WPS Using Push Button Configuration with WPS Setting Up Your WPS Select Settings > Wi-Fi Settings > WPS. The WPS configuration is shown in the following figure. If your computer or other Wi-Fi enabled device supports WPS, you don’t have to input the password manually once your WPS has been set up in your web UI. To set up, follow these steps:
1. Log into the web UI. 2. Select Settings > Wi-Fi Settings > Basic Settings. 3.
Accessing the Internet Configure Your Device on the Web 1. Power on the Z288L device. 2. Connect your computer or other Wi-Fi enabled device to the Z288L device. 3. After the devices are successfully connected, you can access the Internet automatically. NOTE: To change the Z288L device’s settings, log in to the configuration page at http://192.168.0.1 or http://mobile.hotspot. Accessing the Configuration Page 14 1. You will need to locate your password first.
Navigating Your Web Interface Settings The interface is divided into three parts. Related functions can be executed by operation in the related areas. • Index area: Shows the configuration list for your device. • Content area: Shows the detailed configuration. • System Information area: Shows the system status and different kinds of tips. IMPORTANT: Do not modify any settings unless instructed by your service provider. Battery indicator Signal strength Quick Setup 1.
Settings 4. Set Security Configuration as shown in the following figure. Settings Network Settings Select Network Settings > APN. You can set the Access Point Name on this page. SMS Encryption will keep your traffic from being monitored and accessed without authorization. Select an encryption mode from the list, and then set a password for it. 5. The configuration will look as shown in the following figure. This function allows you to receive messages from your ISP.
Settings Settings Device Settings Wi-Fi Settings Account Management Basic Select Settings > Device Settings > Account Management. The administrator settings information is shown in the following figure. Select Settings > Wi-Fi Settings > Basic Settings. The wireless network basic parameters are shown in the following figure. You can change the administrator’s password. Click Apply to confirm your configuration. •N etwork Name (SSID): Service Set Identifier (SSID).
Settings Settings • Security Mode: The security modes are described below: Mode Description OPEN Authentication and encryption won’t be performed. There are risks that private information will be intercepted or unauthorized individuals will use the network. WPA2(AES)-PSK A more secure version of WPA with implementation of the 802.11i standard. WPA-PSK/WPA2-PSK Apply both the WPA-PSK and WPA2-PSK schemes. • Encryption Type: Select an encryption type from the drop-down list.
Settings Settings Firewall If you select Enable, the Port Mapping Settings will appear. You may set up firewall rules to protect your network from viruses and other malicious activity on the Internet. Port Mapping You can set up Port Mapping to enable external computers to access www, FTP, or other services provided by LAN. Select Settings > Firewall > Port Mapping. The Port Mapping page is shown in the following figure: • Source Port: Set the source port of the computer that provides services.
Settings Settings Router Settings Verifying SIM PIN Code Select Settings > Router Settings. The router information is shown in the following figure. NOTE: Your original SIM card does not use a PIN, so there is no need to verify your PIN Code unless you changed your settings or changed the original SIM card. If the PIN code of your SIM card is enabled, you will need to input the PIN code when you log in the first time.
Settings SIM PIN Management If you want to modify the PIN status, select Settings > Device Settings > SIM PIN Management. The PIN management is shown in the following figure. Settings Type the old PIN code, and then type the new PIN code twice. Click Apply to confirm your configuration. NOTE: • Entering the wrong PIN code three consecutive times will lock the SIM card. • After you change the PIN code, you don’t need to input the PIN code again. It is required after the device is reset.
Advanced Users Verifying IP Address and DNS Advanced Users 3. Select Internet Protocol (TCP/IP), and then click Properties. The following steps and figures reflect configuration for the Wireless Internet Protocol for your connections with a Windows® XP operating system. NOTE: Wireless Network Connection is used for Wi-Fi connection. 1. Right-click My Network Places, and then select Properties. 4.
Advanced Users Information Setting Up Your White List for Authorized Devices This function allows you to check system information. A White List is a list of Wi-Fi devices that are approved to connect to this Wi-Fi hotspot. Select Settings > Wi-Fi Settings > White List. The White List configuration is shown in the following figure: If you select Enable, the White List settings will appear as shown below: •M AC Address: Enter an approved MAC address to connect to this Wi-Fi hotspot.
For Your Safety To the Owner •S ome electronic devices, such as the electronic system of vehicles, are susceptible to electromagnetic interference sent by your device if inadequately shielded. Please consult the manufacturer of your device before using if necessary. • Operating your device may interfere with medical devices like hearing aids and pacemakers. Please always keep them more than 20 centimeters away from such medical devices when they are turned on. Turn your device off if necessary.
For Your Safety For Your Safety Limited Warranty • This warranty does not apply to defects or errors in the Product caused by: i. Reasonable abrasion. ii. End User’s failure to follow ZTE’s installation, operation or maintenance instructions or procedures. iii. End User’s mishandling, misuse, negligence, or improper installation, disassembly, storage, servicing or operation of the Product. iv. Modifications or repairs not made by ZTE or a ZTE-certified individual. v.
For Your Safety For Your Safety FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
Troubleshooting Problem Suggested Solution • Make sure the Wi-Fi function is active. Cannot establish the • Refresh network list and select the correct SSID. Wi-Fi connection between the Z288L • Check the IP address to make sure your device can obtain an IP address automatically in the Internet device and your protocol (TCP/IP) properties. Wi-Fi enabled • Type the correct network key (Wi-Fi password) when you device. connect to the Z288L device. • Make sure your SIM card is installed.
42
