User manual

WARNING! Keep a safe distance when using the ash. Do not point the ash toward the

eyes of people or animals.

NOTE: You can pinch or spread your ngers on the screen or press the Volume Up/Down

Key to zoom in or zoom out before taking a picture.

Using Manual Camera Mode

You can use the Manual camera mode to adjust more camera options for your photo,

such as ISO, white balance, exposure, etc.

1. Press the Home Key > >

Camera.

2. Tap MANUAL.

3. Aim the camera at the subject and you can make the following adjustments.

• Drag to any area on the screen that you want to focus on.

• Drag to any area on the screen where you want the camera to meter exposure so

as to adjust the photo brightness.

• Tap to show the grid or the golden spiral, or hide it.

• Tap to change white balance scenario or leave it at Auto.

• Tap to select ISO level or leave it at Auto.

• Tap to adjust the photo exposure.

4. Tap to take the photo.

Recording a Video

1. Press the Home Key > >

Camera.

2. Aim the camera at the subject and make any necessary adjustments. You can tap

any area on the screen that you want the camcorder to focus on before and during

recording.

NOTE: You can pinch or spread your ngers on the screen or press the Volume Up/Down

Key to zoom in or zoom out before recording.

3. Tap

to start and

to stop recording. You can also tap / to pause or resume

recording.

NOTE: While recording is in progress, you can tap

to save the frame as a photo.

Customizing Camera and Video Settings

Before capturing a photo or video, you can tap

to open the following camera setting

options:

CAMERA

• Full screen: Set the viewnder screen as full screen when the back camera is in use.

• Shutter tone: Turn the shutter tone on or o.

• Geo-tagging: Select whether to store the GPS location in your captured photos.

• Review: Select whether to review the picture after you took it. You can also set the

review time.

• Storage location: Tap Save location to change the storage location for

captured photos.

• Restore defaults: Restore default camera settings.

Camera