Z723EL Wireless Home Phone Base Station USER MANUAL Z079584508939 www.zteusa.
TABLE OF CONTENTS Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Know Your Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Install Your Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Charge Your Battery . . . . . . . . . . . . . . . . . . . . . . . . . .
TABLE OF CONTENTS Regulatory and Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . 18 FCC Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 RF Exposure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 CTIA Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GETTING STARTED Back View Bottom View Back Cover Power Socket Telephone Ports Power Switch Note: Your Z723EL comes with an installed nano-SIM card.
GETTING STARTED Install Your Battery Charge Your Battery 1. With the back cover facing upright, sandwich the device between your hands. Slide your top hand down to remove the back cover. 1. Connect the adapter to the power socket on the Z723EL. Do not force the connector into the power socket. 2. Connect the charger to a standard AC power outlet. 2. Insert the battery by aligning the metal contacts on the battery with the metal contacts in the battery compartment.
GETTING STARTED Status Indicators The indicator lights show the device’s status.
GETTING STARTED USING YOUR Z723EL Device Installation Power On or Off The Z723EL works with your wireless service provider’s cellular network instead of your home’s phone jacks. • T o power on your Z723EL, slide the Power Switch to the On position. Position your Z723EL in a location that has a strong signal, typically near a window or outside wall. • To power off, slide the Power Switch to the Off position. Note: When powered off, the Z723EL will not send or receive calls.
USING YOUR Z723EL Phone Calls Place a Call by Dialing 1. Pick up the handset of the connected home phone. 3. To exit Volume Setting Mode, press any other key or wait 5 seconds. Note: If your home phone(s) have volume controls, they are independent of the Z723EL’s Volume Setting Mode. 2. Dial the phone number. Manage Your Voicemail 3. Wait 4 to 8 seconds for the call to be connected automatically.
USING YOUR Z723EL Set Up a Conference Call Notes: When the call waiting and three-way call features are available, you can switch between two calls or set up a conference call. With this feature, you can talk to two people at the same time. If your phone does not have a Flash (or Talk) key, use the off-hook mechanism supported by your phone instead. 1. Place the first call. 2. Once you have established the connection, press the Flash (or Talk) key on your phone. 3.
USING YOUR Z723EL Use TTY Mode Use Advanced Settings Your Z723EL is compatible with TTY devices. A TTY device can allow people who have hearing or speech disabilities to communicate by telephone. COMMAND DESCRIPTION To set the TTY mode or turn TTY support off, dial *983*889*n# on your connected phone, replacing n with one of the following numbers: *983*3284# Reset your device to factory settings. *983*238*xx# Set the auto-dialing time.
SPECIFICATIONS TROUBLESHOOTING PROBLEM DEVICE Model Z723EL Dimension 1.11 x 6.30 x 5.51 in. Weight Approximately 13.5 oz. (383.5 g) Frequency 1.1G Supported Technology LTE After turning the Z723EL on, wait 1 to 2 minutes before making a call. There is no dial tone. Move the device to a location with better signal reception. The connection sounds distorted/noisy. BATTERY Limited Charge Voltage 4.
REGULATORY AND SAFETY INFORMATION FCC Compliance RF Exposure This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
REGULATORY AND SAFETY INFORMATION • P romptly dispose of used batteries in accordance with local regulations. • B attery usage by children should be supervised. • A void dropping the device or battery. If the device or battery is dropped, especially on a hard surface, and the user suspects damage, take it to a service center for inspection. • I mproper battery use may result in a fire, explosion or other hazard.
REGULATORY AND SAFETY INFORMATION WARRANTY Cleaning and Maintaining Limited Warranty • U se an antistatic cloth to clean the Z723EL. Do not use chemical or abrasive cleanser as these could damage the plastic case. Turn off your Z723EL before you clean it. • Use the Z723EL within the temperature range of 14°F to 131°F (-10°C to 55°C), and store within the temperature range of -4°F to 149°F (-20°C to 65°C). The humidity range is 5% to 95%. • D o not use your Z723EL during a thunderstorm.
WARRANTY Limitation of Liability ZTE shall not be liable for any loss of profits or indirect, special, incidental, or consequential damages resulting from or arising out of or in connection with use of this product, whether or not ZTE had been advised, knew, or should have known of the possibility of such damages, including, but not limited to lost profits, interruption of business, cost of capital, cost of substitute facilities or product, or any downtime cost.
26
