User manual

32 33
Connecting to Networks and Devices
Connecting to a WPS Network
Wi-Fi Protected Setup (WPS) is a feature that makes it easy to add your phone to the
access points that supply WPS.
You can use one of the following methods to connect your phone to a wireless network
using WPS.
Method one: WPS button (Recommended)
1. Press the Home Key > > Settings > Wi-Fi.
2. Slide the switch to the On position.
3. Tap > Advanced > WPS Push Button.
4. Press the WPS button on the wireless router and the access point will recognize your
phone and add it to the network.
Method two: PIN
1. Press the Home Key > > Settings > Wi-Fi.
2. Slide the switch to the On position.
3. Tap > Advanced > WPS Pin Entry.
4. The WPS PIN displays on the screen. Enter the PIN into the access point’s setup page.
After entering the PIN, your phone automatically nds the access point and congures
the connection.
NOTE: For detailed information about the WPS feature of the access point, please refer
to its documentation.
Adjusting Advanced Wi-Fi Settings
1. Press the Home Key > > Settings > Wi-Fi.
2. Slide the switch to the On position.
3. Tap to adjust the following settings:
• Network notication: Get notications in the Status Bar when Wi-Fi is on and an
open network is available.
• Keep Wi-Fi on during sleep: Set whether to keep Wi-Fi on in Sleep mode.
• MAC address: Check the MAC address.
• IP address: Check the phone’s IP address.
4. From the main Wi-Fi menu, tap > Advanced to adjust the following settings:
• Install certicates: Install certicates needed for connecting to certain Wi-Fi
networks.
• WPS Push Button: Connect to a WPS network via the push button method.
• WPS Pin Entry: Connect to a WPS network via the phone PIN method.
Connecting to Bluetooth Devices
Bluetooth is a short-range wireless communication technology. Phones or other
devices with Bluetooth capabilities can exchange information wirelessly within a
distance of about 30 feet (10 meters). The Bluetooth devices must be paired before
the communication is performed.
Turning Bluetooth On/O
1. Press the Home Key > > Settings > Bluetooth.
2. Slide the switch to the On or O position.
When Bluetooth is on, the icon will appear in the Status Bar.
Changing the Device Name
1. Press the Home Key > > Settings > Bluetooth.
2. Slide the switch to the On position if Bluetooth is o.
3. Tap > Rename this device.
4. Edit the name and tap RENAME.
Pairing With Another Bluetooth Device
1. Press the Home Key > > Settings > Bluetooth.
Connecting to Networks and Devices