GETTING TO KNOW YOUR MOBILE HOTSPOT ON/OFF switch WPS key LED indicators micro-SIM card slot Charging & USB port Part Description ON/OFF switch Slide it to turn on/off the Hotspot. micro-SIM card slot Install the micro-SIM card (included). WPS key When the Wi-Fi function is enabled, hold it for more than 3 seconds to activate the WPS function.
LED indicators It shows the signal strength, battery, Wi-Fi and message. Charging/ USB port Charge your device. Connect the client to your device via USB cable. Reset point Insert a pin and hold it for 3 seconds to reset your device.
INDICATORS When the Hotspot is powered on, the following icons will light up. For a description of the icons, refer to the following table. Indicator Status Description Limited or no service, no SIM card or SIM Red solid card error, registered to the LTE/UMTS/ HSPA network. Registered to the UMTS or HSPA network and connected to UMTS or HSPA network. Network Green solid Registered to LTE network and Blue solid connected to LTE network.
SMS You have unread Blue solid messages or FOTA (new software). Blue blinking Your inbox is full or FOTA upgrading. LED light No unread messages off or no new messages. Blue solid Wi-Fi is on. Wi-Fi Blue blinking WPS is active. LED light Wi-Fi is off. off The battery is low. (From 10% to dead) Red solid Please charge the battery. Battery Green blinking The battery is being charged. The battery level is middle or high. (From 100% to 11%) Green solid LED light The battery is not off inserted.
SET UP YOUR MOBILE HOTSPOT 1. Lift SIM card cover. 2. Install SIM card.
3. Power on. Slide to turn on Charge your Mobile Hotspot You can charge your Mobile Hotspot by using the charger included in the box or by plugging it into your computer using the USB cable.
Install the battery 1. Remove the cover. 2. Install the battery.
CONNECT & GO Connect your Wi-Fi device to your Mobile Hotspot 1. Power on your Mobile Hotspot. 2. On your computer or other Wi-Fi enabled device, search for available Wi-Fi Networks and select the default Network Name (SSID) for your Mobile Hotspot. Note: You can view the label on the device to get the default Wi-Fi SSID and password. 3. Enter the default password and click OK. 4. Open a web browser and go to www.T-Mobile.
USE THE WPS If your client device supports WPS, you don’t have to input the password manually after WPS has been available. Please do the following steps: 1. Power on your Mobile Hotspot and enable the Wi-Fi function. 2. Press and hold the WPS key on your device for more than 3 seconds to start Wi-Fi Protected Setup authentication process. 3. Enable the WPS function on your client to respond to this authentication process. 4. Follow the system prompts on your client to finish the connection.
MANAGING YOUR MOBILE HOTSPOT 10
Access T-Mobile 4G LTE Mobile Hotspot You can access your 4G LTE HotSpot device information, using an Internet browser To access using a browser, do the following: 1. Connect to your hotspot device via Wi-Fi using the network connection software on your computer. Provide the Wi-Fi network password, if requested. 2. Open a browser and enter http://Mobile.Hotspot in the address bar. The T-Mobile 4G LTE Mobile Hotspot login screen appears. 3. Enter your Password in the field provided.
To access via USB cable, do the following: 1. Connect your hotspot device to the PC with USB cable. 2. Power on your device. 3. The OS detects and recognizes new hardware and finishes the installation automatically. After successful installation, the icon 4. 5. 6. 7. will appear on your desktop. Note: If the system does not launch installation automatically, you can run the installation program in path of My Computer > Mobile Hotspot. Double click the icon to open the login screen.
Change Mobile Hotspot Admin Password 1. 2. 3. 4. Access http://Mobile.Hotspot. Click Settings in the navigation area. Select the Device Settings tab. Follow steps under Account Management to update your Password. 5. Click Apply. If everything is entered correctly, the Admin Password Changed dialog appears indicating the password was successfully changed. Change Mobile Hotspot Network Name (SSID) 1. 2. 3. 4. Access http://Mobile.Hotspot. Click Settings in the navigation. Select the Wi-Fi Settings tab.
6. Click Apply to save your changes on the Wi-Fi Settings tab of the Settings screen. Change Mobile Hotspot Wi-Fi Password 1. 2. 3. 4. Access http://Mobile.Hotspot. Click Settings in the navigation area. Select the Wi-Fi Settings tab. Change the value that appears in the Password field in the SSID area. 5. Click Apply in the SSID area to save your changes on the Wi-Fi Settings tab of the Settings screen.
1. Log in the web UI. 2. Select Settings > Wi-Fi Settings > Allowed Devices. 3. The switch is off by default, all user input correct password can access. 4. After open the whitelist function, you need to know the user client’s MAC address and add to the list, the format is XX:XX:XX:XX:XX:XX. You can add up to 10 devices if they are all going to connect, because the Wi-Fi chip can only support 10 devices connected at the same time.
5. If you want to remove some users in the whitelist, that means they are no longer allowed to connect, click the button, and then click Yes to remove.
ADDITIONAL INFORMATION Wi-Fi: Capable devices required. Devices using wireless connections may be vulnerable to unauthorized attempts to access data and software stored on the device. Plan data allotment applies to use by connected devices sharing Wi-Fi. Use of connected devices subject to T-Mobile Terms and Conditions. Mobile Internet Postpaid Data Passes: Qualifying postpaid plan and qualifying credit required. SIM Starter Kit may be required. Passes do not include voice or messaging.
Mobile Internet Pay In Advance Data Passes: Limited time offer; subject to change. Not all features available on all devices. SIM starter kit may be required. Service available for time period and/or usage amount provided by Pass. For time period, a day is 12:00 am to 11:59 pm, Pacific Time. Usage rounded up to the nearest MB each session. Only one Pass may be active at a time. Account suspended after 365 days of inactivity. Data only; does not include voice, messaging or Wi-Fi services.
ADDITIONAL HELP T-Mobile Hotspot URL: http://Mobile.Hotspot/ or IP address: 192.168.0.1. From http://Mobile.Hotspot, click for help. Get in touch, free of charge: Just dial 611 from your T -Mobile phone or call 1-877-453-1304. Customer Care representatives are available from 3 a.m. to 10 p.m. Pacific time, daily. Automated account help is available 24 hours a day, 7 days a week.
TCS530100.
