User manual
38
Connecting to Networks and Devices
Connecting to a WPS Network
WPS (Wi-Fi Protected Setup) is a feature that makes it easy to add your phone to access
points which support WPS.
You can use one of the following two methods to connect your phone to a wireless
network using WPS.
Method one: WPS button (Recommended)
1. Press the Home Key > > Settings > Wi-Fi.
2. Slide the Wi-Fi switch to the On position.
3. Tap > Advanced > WPS Push Button.
4. Press the WPS button on the access point and the access point will recognise your
phone and add it to the network.
Method two: PIN number
1. Press the Home Key > > Settings > Wi-Fi.
2. Slide the Wi-Fi switch to the On position.
3. Tap > Advanced > WPS Pin Entry.
4. The WPS PIN number displays on the screen. Enter the PIN number into the access
point’s setup page.
After entering the PIN number, your phone automatically nds the access point and
congures the connection.
NOTE: For detailed information about the WPS feature of the access point, please refer to
its user documents.