User's Manual

Hardware Development Guide of Module Product
All Rights reserved, No Spreading abroad without Permission of ZTEWelink III
错误！未找到
用源。
ZM8620_V2
Revision History
Version
Date
Description
V1.0
2013-02-22
First published
V2.0
2013-03-20
Delete the part of 4.8 in the former version, and change the header,
front cover, legal information and footer.
V2.1
2013-08-16
1. Modify the legal information
2. Modify the part of 7.1.1
3. Modify the format of footer and header
4. Modify the figure of PIN Configuration Diagram
5. Add the figure of PIN Distribution Diagram
6. Add chapter 8 of Debugging Environment and Method
7. Modify chapter 7 of Antenna
2013-09-30
8. Modify the typical voltage of power supply to 3.8V
9. Add the support of WinCE OS
10. Update the Product Material Object Picture of Figure 2-1
11. Modify the support of GPRS Class B in Table 2-1
12. Modify the Specification of SIM interface in Table 2-1
13. Modify the pin NO. of USIM in Table 4-4
14. Modify the Figure of (U)SIM Card Signal Connection Circuit
15. Modify the support of MMS, RAS, phonebook, network lock,
and USSD in Table 2-1
16. Add the Figure 4-4 of Module Serial Port & AP Application
Processor
17. Add the Table 4-6 of Definition of UART Signal
18. Add 4.10 of W_DISABLE_N Signal
19. Modify chapter 5.3 of Resetting Flow
20. Delete the part of Power_on/Power_off in chapter 5.2 and
chapter 4.8
21. Add Table 5-3 of Power-on/Resetting Period
22. Complete and modify Table 4-2 of PIN Interface Definition
2013-10-11
23. Add chapter 4.8 of SPI Interface
24. Add chapter 6 of Related Test & Testing Standard
2013-12-12
25. Add Contact Information
26. Modify Power-on/Resetting Period in chapter 5
27. Add the document in table List for Supported& Related
Documents
28. Modify LTE TDD in Technical Standard to DL 50Mbps / UL
25Mbps (10MHz) in Table 2-1
29. Modify the RxDiv Band in Table 2-1
30. Add the power consumption in the mode of UMTS/LTE in