User's Manual
Table Of Contents
- ZTEWelink Hardware Development Guide of ZM8620_V2 Module Product_V2.3.pdf
- Legal Information
- 1 About This Document
- 2 Product Overview
- 3 Mechanic Feature
- 4 Pin Description
- 5 Electric Feature
- 6 Related Test & Testing Standard
- 7 RF Specifications
- 8 Antenna
- 9 Debugging Environment and Method
- 10 Package System
- 11 Safety Information
- 12
Hardware Development Guide of Module Product
All Rights reserved, No Spreading abroad without Permission of ZTEWelink 46
错误！未找到
用源。
ZM8620_V2
9.2.4 USIM Card Console Interface
As shown in Figure 9-2, 1 the USIM card console is the 5PIN USIM card console on the conversion
board, connecting to: power, ground, UIM_DATA, USIM_CMD and UIM_CLK. It supports the
1.8V/3V USIM card.
9.2.5 PON_RESET_N Button
This button corresponds to the PON_RESET_N PIN of the PCI-E interfaced. The user presses the button
to reset the module.
9.2.6 W_DISABLE_N Button
This button corresponds to the W_DISABLE_N PIN of the PCI-E interface. The user presses this button
to enable or disconnect RF, so as to perform the debugging of this PIN.
9.2.7 LED Indicator
The LED indicator on the debugging board is connected to the LED_WWAN_N interface of
ZM8620_V2. By controlling the indicator, the user can debug the function of this interface.