ZTE BLADE A110 Quick Start Guide 1
LEGAL INFORMATION Copyright © 2016 ZTE CORPORATION. All rights reserved. No part of this publication may be quoted, reproduced, translated or used in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. ZTE Corporation reserves the right to make modifications on print errors or update specifications in this guide without prior notice. Trademarks ZTE and the ZTE logos are trademarks of ZTE Corporation.
Other trademarks and trade names are the property of their respective owners. We offer self-service for our smart terminal device users. Please visit the ZTE official website (at www.ztedevice.com) for more information on self-service and supported product models. Information on the website takes precedence. Visit http://www.ztedevice.com to download the user manual.
Getting to Know Your Phone Indicator Receiver Front Camera Sensor Volume Key Power Key Touch Screen Home Key Back Key Menu Key 4
Headset Jack Charging/USB Jack Camera Flash Lamp Volume Key Power Key Back Cover Loud Speaker 5
Power Key · Press and hold to power on, select phone modes, turn on/off airplane mode, restart, or power off. · Press to wake up your phone. Home Key · Touch to return to the Home Screen from any application or screen. · Hold to see Google search. Menu Key Touch and hold to see recently used applications. Back Key Touch to go to the previous screen. Volume Key Press or hold to turn the volume up or down.
Starting Up Switch off your phone before installing or replacing the battery or the SIM card. The microSDHC™ card is optional and can be installed and removed while the phone is turned on. Unmount the microSDHC card before removing it. 1. Place your finger in the slot at the bottom of the back cover to lift and remove the cover. 2. Hold the SIM card with its cut corner oriented as shown and slip it into the card holder.
micro-SIM card 3. Hold your microSDHC card with the metal contacts facing down and slide it into the microSDHC card slot.
4、Align the connectors on the phone and the battery and slide the battery into the compartment. Then gently press the battery down until it is secured. 5、Align the back cover with the back of the phone and press the cover back into place. Make sure all the tabs are secure and there are no gaps around the cover. Charging the Battery 1. Connect the adapter to the charging jack. Ensure that the adapter is inserted with the correct orientation. Do not force the connector into the charging jack.
2. Connect the charger to a standard AC power outlet. 3. Disconnect the charger when the battery is fully charged. Powering On/Off Your Phone Make sure the battery is charged before powering on. · Press and hold the Power Key to turn on your phone.
· To turn it off, press and hold the Power Key to open the options menu. Touch Power off. Product Safety Information Do not use hand-held while driving Do not use while re-fuelling For body-worn operation maintain a separation of 10 mm This device may produce a bright or flashing light Small parts may cause a choking hazard Do not dispose of it in a fire This device may produce a loud sound To prevent possible hearing damage, do not listen at high volume levels for long periods.
Keep away from pacemakers and other personal medical devices Avoid any contact with liquid, keep it dry Switch off when instructed in hospitals and medical facilities Do not attempt to disassemble Switch off when instructed in aircrafts and airports Only use approved accessories Switch off in explosive environments Do not rely on this device for emergency communications 12
§ 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.
