ZTE CORPORATION A711 GSM Dual-band Digital Mobile Phone User Manual 1
Copyright © 2007 by ZTE Corporation All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. ZTE operates a policy of continuous development. We reserve the right to update the technical specifications in this document at any time without prior notice. Release V 1.
Contents GENERAL INFORMATION........................................................................................................ 4 Welcome....................................................................................................................................... 4 Security ........................................................................................................................................ 4 Safety Precautions..................................................................
General Information Welcome Thank you for using ZTE A711 GSM Dual-band digital mobile phone. To guarantee the mobile phone always in its best condition, please read this manual carefully and keep it for further use. The pictures, symbols and contents in this manual are just for your reference. They might not be completely identical with your mobile phone.
If you use any other personal medical device, please consult the manufacturer of your device to determine if it is adequately shielded from RF energy. In those facilities with special demand, such as hospital or health care facilities, please pay attention to the restriction on the use of mobile phone. Switch off your phone if required. Mobile phone Please use original accessories or accessories approved by the phone manufacturer.
system from interference, it is forbidden to use mobile phone in flight. Using mobile phone before the plane taking off should get aircrew’s permission according to safety regulations. If the mobile phone comprises the function of automatic timing power-on, please check your alarm setting to ensure that your phone will not be automatically turned on during flight. Battery Use Do not short-circuit the battery, as this can cause overheating to bring about fire.
Getting Started Key Definition Display Indicators : Signal strength : Call diverting : Roaming : New message : Enable the mute mode : Alarm clock set : Battery status : Enable vibrating function Technical Parameters Handset Type ZTE A711 Dimensions（L×W×H） 93 mm Weight Approx. 76 g (without battery) x 48 mm x 14.3 mm Battery Continuous standby time Approx.90 hours ~ 130 hours (subject to network status) Continuous talk time Approx.
Removing & Installing the Battery Remove: Power off your phone, slide down the cover and then lift the battery from the bottom to remove it. Install: Place the battery into position, push down on the upper section of the battery until it clicks into place and then install battery cover. Charging the Battery Plug the charger connector into the charge port at the bottom of the phone. (Note: Put upward the side with arrow.) Then plug the other end of the charger in an appropriate electrical outlet.
when it is connected to an outer power source. Inserting & Removing SIM Card Switch off your phone, disconnect the outer power source and remove the battery. Insert the SIM card into the SIM card slot or pull it out from the slot. Switch on/off Your Phone Hold the End key to power on/off the phone. The mobile phone will automatically test whether the SIM card is plugged in and valid after power on, then the following messages will be displayed on the screen sequentially.
Method 1: Dial the telephone exchange and then the extension number. Method 2: Input the telephone exchange number, press the # key twice to input a pause character “P”, input the extension number, and then press the Dial key. Then your phone will dial the extension automatically after getting through the exchange.
Select Received Calls to view the calls that you received. Select Dialled Calls to view calls that you have dialed. Select Missed Calls to view the calls that you received, but have not answered. In the calls list interface, press Options to enter the detailed submenus: ¾ Send message: Send short messages to the number. The operation is the same as creating messages. ¾ Detail: View the detailed information of the call. ¾ Save: Save the number to the SIM card or phone. ¾ Delete: Delete this entry.
Automatic CSP: Automatically select the network when making a long distance call. Games In the standby mode, press OK key and select Games and then press the OK key to enter the games menu interface. Tetris: The options are as follows: ¾ New game: Start a new game. ¾ Set lines: Select the original lines of the game. ¾ Help: Check the rules and instructions for the game. Push Box: The options are as follows: ¾ New game: Start a new game. ¾ Load game: Read the saved game records.
Edit In the contacts list interface, press Options and select Edit. You can edit the current Number and Name record. Delete In the contacts list interface, press Options and select Delete, you can delete all information of the current record. Search In the contacts list interface, press Options, select Search and then enter the name you want to search. Quick-search: In the contacts list interface, you can press the number keys to go to the record of the name with the similar initial character.
Service dialling number The service number has been preset in the SIM card by the network service provider. The service dialling number can be checked or dialed; however, these numbers can not be modified or deleted. If you cannot access this service, please consult your service provider for more information. Messaging If the network supports and you have subscribed this service, you can send and receive text short messages freely. And you also can subscribe a voice mailbox to receive voicemails.
Message Settings You must set up necessary information before using message functions. Enter the Message Settings submenu: ¾ Templates: Edit the preset templates which you can bring out by holding the * key When editing messages. ¾ Message Center: Input the short message service center number (You must obtain this number from your service provider.), and then press Save to store the number.
Enter the Conversion interface, select an exchange rate and save it. Input a figure at the field and check the result. Profiles In the standby mode, and then press the OK key and then select Profiles to access the Profiles interface. Select Profiles: You can select the Profiles you need in this submenu. The Profiles options are: Normal, Meeting, Outdoor and Silent. The default settings for each individual Profiles are preset by the manufactory. You can change them in Personalise menu.
1234. Please change it with your own private password as soon as possible. SIM Password: SIM password (PIN 1 code) can prevent your SIM card from illegal use. Select ON/OFF to enable or disable SIM password protection; select Change PIN 1 to set a new PIN 1 code. Note: Three consecutive times of wrong PIN 1 code inputting will lock the SIM card. Then, the PUK code is needed to unlock the SIM card. The PIN 1 code and the PUK code may be provided to you together with the SIM card.
Text Input Overview Your mobile phone provides the following input methods: upper and lower case input, numeric input and predictive text input, punctuation mark or special characters input. When you are in a field that allows characters to be input, you will notice the text input mode indicator in the upper right corner of the screen. Press the # key to switch among different input modes. ABC and abc Mode Use the number keys from 2 to 9 to input your text.
Up/Down key Roll the cursor up/down. Left/Right key Roll the cursor left/right. End key Exit Troubleshooting This section describes how to troubleshoot some problems when they occur to your phone. If you cannot deal with them, contact your local dealer. 1. “Enter PIN 1” is shown when the phone is switched on. Input the PIN 1 or input the new PIN 1 if you have changed the code. The code can be set “OFF” if you do not want to input. 2. “Insert SIM” is shown when the phone is switched on.
Health and safety information The phone with internal antenna has been tested for compliance with FCC RF Exposure (SAR) limits and is complied with FCC RF exposure compliance requirements. Exposure to radio frequency energy Radio wave exposure and Specific Absorption Rate (SAR) information. The handset is designed to comply with safely, requirements for exposure to radio waves.
