ZTE B2016 Quick Start Guide 1
LEGAL INFORMATION Copyright © 2015 ZTE CORPORATION. All rights reserved. No part of this publication may be quoted, reproduced, translated or used in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. ZTE Corporation reserves the right to make modifications on print errors or update specifications in this guide without prior notice.
Trademarks ZTE and the ZTE logos are trademarks of the ZTE Corporation. Google and Android are trademarks of Google, Inc. The Bluetooth® trademark and logos are owned by the Bluetooth SIG, Inc. and any use of such trademarks by ZTE Corporation is under license. microSDHC Logo is a trademark of SD-3C, LLC. Qualcomm® Snapdragon™ processors are products of Qualcomm Technologies, Inc. Qualcomm and Snapdragon are trademarks of Qualcomm Incorporated, registered in the United States and other countries.
Visit http://www.ztedevice.com to download the user manual. Just click Support > Manuals from the home page and then select your location, product type, and name to search for related support information. Version No.: R1.0 Edition Time : Dec 11, 2015 Manual No.
Produ uct Safety y Informa ation Don’t make or receive phone calls while driving. D d Never text wh hile d driving. F body-worn opera For ations, maintain a sep paration of 10 mm. S Small parts may causse choking. Y Your phone can prod duce a loud sound. To prevent possible hearing T h damage, do not listen at high volu ume levels for long periods. A Avoid contact with an nything magnetic. K Keep away from pace emakers and other electronic e medical devices.
Your phone may produce a bright or flashing light. Don’t dispose of your phone in fire. Avoid extreme temperatures. Avoid contact with liquids. Keep your phone dry. Do not attempt to disassemble your phone. Only use approved accessories. Don’t rely on your phone as a primary device for emergency communications.
Gettin ng to Kno ow Your P Phone arpiece Ea dset jack 3.
B Back camera F Flash F Fingerprint scanne er 8
Beforre Getting g Started Installing the t nano-UIM / nano-SIM / microSDHC Card Power off your y phone before installing i or removin ng the nano-UIM / nano-SIM or o microSDHC card d. 1. Insert th he tip of the tray eje ect tool into the hole e on the nano-UIM / nano-SIIM card tray or micrroSDHC card tray. 2. Pull out the nano-UIM / nan no-SIM card tray orr microSDHC card tray t and he nano-UIM / nano o-SIM card or micro oSDHC card on the tray, as place th shown. Then carefully insta all the tray back.
CAUTIO ON: To avoid dam mage to the phone, please do not use other o kinds of nano-UIM / nano-SIM cards, and do not use e a non-standard na ano-UIM / nano-SIM M/ m a (U)SIM card. Yo ou can get the stand dard nano-UIM / card cut from nano-SIM / card from your serviice provider. Note: Slot2 only supports microSDHC C card. Charging the Battery Your phone’ss battery should havve enough power fo or the phone to turn n on, find a signal, and make a few ca alls.
WAR RNING! Use only ZTE-approved charg gers and cables. Th he use of unapproved our phone or cause the battery to explo ode. accessories could damage yo ON: CAUTIO Do not change the built-in rech hargeable battery in n your phone by yourself. ged by ZTE or ZTE E authorised service e The batteryy can only be chang provider. 1. Connecct the adapter to the e charging jack. Enssure that the adapte er is inserted d in the correct direcction. 2. Connecct the charger to a standard s AC power outlet. 3.
NOTE E: If the battery is extremelyy low, you may be unable u to power on the e even when it is be eing charged. In this case, try again affter phone charg ging the phone for at a least 30 minutes. Contact customer servicce if you still cannott power on the phon ne after prolonged charg ging. The battery b is not removvable, do not removve the rear cover please e. Presss and hold the powe er key for about 10 seconds to force th he mobile e phone restart. FCC Re egulations s The 15.
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna.
body operations at 1.0cm from the body. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Body-Worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 1.0 cm must be maintained between the user’s body and the device, including the antenna.
The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model device is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/ea/fccid after searching on the FCC ID for your device, which can be found on the back of the device.