ZTE C362+ CDMA 1X Digital Mobile Phone User Manual
Copyright © 2008 by ZTE Corporation All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice. Version: Release 1.0 Date: Feb.
Declaration We, ZTE Corporation, declared that: The product is installed with battery separately in the box. The FCC ID label is placed on the mobile phone clearly visible to all persons at the time of purchase. The user is cautioned that changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules.
standards include a substantial safety margin designed to assure the safety of all persons, regardless of age or health. The exposure standard for wireless fixed phoned employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limits set by the FCC are 1.6W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone transmitting as its highest certified power level in all tested frequency bands.
the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Content 1 General Information ....................................................... 1 1.1 Welcome.................................................................................... 1 1.2 Security ..................................................................................... 1 1.3 Safety Warnings .............................................................. 2 1.4 Limit Warranty .......................................................................... 5 1.5 Limitation of Liability..............
3 Basic Operations............................................................ 18 3.1 Making a Call.......................................................................... 18 3.2 Answering a Call..................................................................... 20 3.2.1 Setting Any Key Answer ................................................. 20 3.2.2 Reject the Call by Sending SMS ..................................... 20 3.2.3 Incoming Call Silence .....................................................
5.3 Reading Message .................................................................... 30 5.4 Viewing Outbox ...................................................................... 31 5.5 Erasing Messages.................................................................... 31 5.5.1 Deleteing a Message........................................................ 32 5.5.2 Erasing All Messages ...................................................... 32 5.6 Reading and Setting Voice Mail .............................
6.1.1 Set Wallpaper................................................................... 39 6.1.2 Set Backlight ................................................................... 39 6.1.3 Set Keypad Light............................................................. 40 6.1.4 Set Intensity..................................................................... 40 6.1.5 Set Contrast ..................................................................... 40 6.1.6 Set Language ........................................
6.4.1 Auto Key Guard............................................................... 47 6.4.2 Alert................................................................................. 48 6.4.3 Version............................................................................. 48 6.4.4 Wap Settings .................................................................... 49 7 Organiser ....................................................................... 50 7.1 Scheduler .........................................
Multimedia..................................................................... 59 11.1 Camera .................................................................................. 59 11.2 Multimedia ............................................................................ 60 11.3 File Manager ......................................................................... 61 12 Games............................................................................. 62 13 Text Input..................................
Explanation for Mobile Phone with/without UIM Card There are two types of ZTE CDMA Mobile phone, one need UIM card inserted and another does not need. Sections or functions in this manual are for the phone with UIM card. If your phone could be used without UIM card, please pay attention to the following items: 1. You can use your phone without inserting the UIM card. 2. Some functions are only available with UIM and won't display, such as, You can save the new contact only in Phone, not in UIM.
1 General Information 1.1 Welcome Thank you for choosing C362+ CDMA 1X Digital Mobile Phone. To guarantee the mobile phone always in its best condition, please read this manual carefully and keep it for future use. The pictures, symbols and contents in this manual are just for your reference. They might not be completely identical with your phone. Please subject to the real object.
Take it with you as you can. 1.3 Safety Warnings To the Owner Some electronic devices are susceptible to electromagnetic interference sent by mobile phone if inadequately shielded, such as electronic system of vehicles. Please consult the manufacturer on the device before using the phone if necessary. Operating of mobile phone may interfere with medical devices like hearing aides and pacemakers.
cause injury if used as a toy. Mobile Phone Please use original accessories or accessories that are authorized by the manufacturer. Using any unauthorized accessories may affect your mobile phone’s performance, and violate related national regulations about telecom terminals, or even endanger your body If you want to clean your phone, please use clean fabric that is a bit wet or anti-static. Do not use harsh chemical cleaning solvents or strong detergents to clean it.
equipments. Do not attempt to disassemble the mobile phone and battery by yourself. Non-expert handling of the devices may damage them. Do not charge the mobile phone without battery. On occasion of emergent calling, keep your phone in status of power on and in area of service. On the condition of standby, press the key to enter emergency phone number, and then press Send key to make a phone call. Battery Using Do not short-circuit the battery, as this can cause excessive heat and fire.
into account in practical use. Safety airbag, brake, speed control system and oil eject system shouldn’t be affected by wireless transmitting. If you do meet problems above, please contact your automobile provider. Please power off your mobile phone when refueling your automobile, and so do the place where duplex wireless equipments are banned. Don’t put your phone together with flammable or explosive items, as inner spark may cause fire. In Aircraft Follow the restrictions in aircraft.
(c) Water or any other liquid damage. (d) Any unauthorized repair or modification. (e) Power surges, lightning damage, fire, flood or other events outside ZTE’s reasonable control. (f) Use of the product with any unauthorized third party products such as generic chargers. (g) Any other cause beyond the range of normal usage for products. End User shall have no right to reject, return, or receive a refund for any product from ZTE under the above-mentioned situations.
2 Know Your Phone 2.
Key Tip Function Description Make or answer a call. Press Send key in standby mode to Send Key enter all Records list. Press Send key two times directly to redial the last number. End an active call or reject a call. End key Power on/power off. Exit from any interface to standby mode. Left Select Key Enter main menu in standby mode. Switch to the options of left bottom submenu. Right Select Key Enter Contacts in standby mode. Switch to the options of right bottom submenu.
Scroll the cursor up. Used as selection key up for keying in commands and selecting options shown on the display. In standby mode, hold Up key to power on/off the LED light. UP /Down In standby mode, hold Down key key to enable or disable the phone in (Scroll key) Silence. Press Up key to enter Messages Menu. Press Down key to enter Ring Tone. Used as direction key in games. Scroll the cursor left and right.
Key in numbers or characters. Make a Speed Dial call. ~ 0~9 Number Hold 0 Key to input + in standby key mode. Hold 1 Key to enter Voice Mail in standby mode. # key: Press # key to select text input mode. Hold # key in standby mode to lock the keypad. *key，#key * key: Hold * key in standby mode to enable/disable vibration. In text mode, press * key once to enter Symbols mode. Note: To “press” the key in this manual means to press the key and release it.
Roaming New Voice Mail New SMS Ringer with Vibration Vibration Key Lock Silience Mode Alarm Power Indication 2.3 Technical Parameters Handset Type ZTE C362+ （Width×Height×Thickness） Dimensions 46.5mm*107.5mm*13.8mm Weight About 80g(Battery Included) Battery Continuous time standby Continuous talk time About 80h～240h (Subject to Network) About 2h～4h (Subject to Network) Note: Please refer to the real phone for other relative parameters of the battery and charger.
2.4 Battery The attached Li-ion battery along with the phone can be used after unpacking. For the first three times, please use up the power and charge it fully for a new battery to perform well. 2.4.1 Remove and Installation of Battery Remove：(1) Press and push the back-cover of the phone down to release and remove it off the phone. (2) Put finger on the side finger grips, and then lift up the battery from the finger grips to remove the battery.
2.4.2 Charging the Battery Plug out rubber away (turn 180° as shown in the picture) from the jack on the bottom of the handset and connect the lead from the charger to the socket on the bottom of the phone. (Note: The side with arrow should be upright while connecting). Connect the charger to a standard wall AC socket.
Meanwhile, the charging indicator in up-right corner of the display flops cyclically, indicating the charging is going. In power-off mode while charging, the display only shows the charge indicator. If the battery is completely flat in storage or used up, it may take for a while before the charging indicator appears on the display or any calls can be made. When the charging indicator on the screen stops flopping, the charging is completed. The charging takes usually up to 2～3 hours.
environment and application methods. 2.5 Connecting to the Network 2.5.1 UIM Card Before using the phone, please insert effective UIM (User Identity Module) card into the phone. All the information related to the network connection is recorded in the metal plane area of UIM card together with the information you stored in your Contacts in the UIM card. The UIM card can be inserted into any CDMA phone to use (new phone automatically reads UIM card).
2.5.3 Power on/off Phone Press and hold End key to power on/off the phone.The phone will check whether UIM card inserted well or not. And then follow the prompt indication on the display: Enter PIN——Key in PIN code of UIM card if it is set. Searching——Search appropriate network connected. 2.5.4 PIN Code To set PIN code (personal identification number) is to avoid the illegal usage of UIM card. To input PIN code of UIM card and press OK key to confirm to start on using phone.
2.5.5 Connecting the Network After powering on and inputting PIN code, the phone automatically searches the network available and in state of standby mode. Besides sending and receiving calls, you can also do: Press Left select key to enter main Menu. Press Right select key to enter Find. Hold * key to lock the keypad. Hold Up key to power on/off LED Light. Hold Down key to enable/disable the phone in Silence. Hold # key to enable/disable vibration mode. Press Up key to enter Messages menu.
3 Basic Operations 3.1 Making a Call Please ensure that you are in the place where the signal can be received. Examine network signal strength icon on the screen. The more the indication bars, the stronger the intensity of receiving signal is. If there is no bar, please move to the place where the intensity of receiving signal is better. Sometimes, you only need to change the direction.
code) or key in international prefix e.g. “00” of international call directly. Country code + Area code + Telephone number 0086 755 26770000 Making Recent Calls All calls you recently dialed, received or missed are saved in your phone. All numbers are grouped as Missed Calls, Received Calls and Dialed Calls. When the list is full, the oldest number will be erased automatically when new record is coming. You can check the list as follows: In standby mode, press Send key to view Dialed Calls.
3.2 Answering a Call When a call is incoming in standby mode, the phone will offer corresponding ringer or vibration to prompt according to your Setting. With the number already saved in Names, the phone also shows the name of caller meanwhile. • Press Send key • Press End key to answer an incoming call. to end a call and the call duration is temporarily displayed. See “6.3 Call Setting” or refer to other ways of answering calls for your option as follows. 3.2.
3.2.3 Incoming Call Silence • When a call is coming, press Right select key to select Mute the ringer tone. • This function silences the current incoming call only. The phone will ring normally as next call coming. 3.3 In Conversation 3.3.1 Adjusting Volume in Conversation Press Left/Right key to adjust volume of Earpiece during a call. 3.3.2 Selecting Options in Conversation During a call, press Left/Right select key to select options of Option (Names, Message, Record), Mute/Unmute,etc.
Menu. Scroll Up/Down or Left/Right key through the menu and select functions according to the prompt on the screen. ii. If the menu contains submenus and further submenus, select options and submenu you want according to the prompt on the screen. iii. Press OK key or Right Select Key to set or return to the previous menu. Press End key to exit to standby mode. Bottom Menu Function: If options are displayed on the bottom of the screen, press Left/Right select key to select.
4 Names You can save contacts in phone and UIM card. Each contact in phone’s memory has three phone numbers，home number, mobile number and work number, and each contact in UIM card only has one phone number. 4.1 Add Name 4.1.1 Add New Entry 1. Select Menu→ Names→ Add Name→ Name. 2. Select the save postion you want same, Phone or UIM. 3. Press Up/Down key to relative item, Name: Add the persons name. See “13 Text Input” more instructions for wirting text and character.
Colleagues, School, Club, or Vip. Photes: Press OK key to choose the photos from File Manager. Call Alert: Press OK key to set specific ring for the calling of the names. SMS Alert: Press OK key to set specific ring for the SMS of the names. (Note: when you same the name in UIM, there are only Names and Numbers to input.) 4. After the completion of writing, press Left Select key/OK key to save the contact. 4.1.2 Edit Existing Name 1. Select Menu→ Names→ Add Name→ Existing Name. 2.
Further operation can be executed, such as: Edit: Edit the names. Send message: Send message to this number. Make a call: Make a call to the default number of this names. Send Name: Send SMS of this number information to others. Erase: Delete the number. Copy to Phone/UIM: Copy the contact to Phone/UIM. Move to Phone/UIM: Move the contact to Phone/UIM. Set to speed dial: Assign a speed dial number to the phone number. (When the contacts saved in UIM, there is no this function.
the record you are finding, and press OK key to view the details. Search 1. Select Menu → Names → Find. 2. Press Up/Down Key to select Find Name, Find Number or Find Group. 3. Input the name or number you want find, or select the group you want find and press OK key. 4. Press Up/Down key to scroll though the corresponding name(s) and records in the list. Scroll to the name you want, and press OK key to view the details or select Option.
Press Left select key or OK key. Further operation can be executed, such as: View Numbers: view the all numbers of the group. Set Ring Tone: Set the personal call ringer for the group. You can select ring from the list set already in phone or download ring by yourself. Set Msg Tone: Set the personal Msg ringer for the group. Press Up/Down key to select the sms ring. Edit Title: press OK key and you can rename the name of group. Note: For the group of UIM and no Group, you can only see view numbers. 4.
Dialing： You can also make a call by entering speed dial number in the standby mode. Method 1: Enter speed dial number, press Send Key to dial. Method 2: Directly hold the Speed Dial Number digit key. If the Speed Dial Number is one-digit, directly hold the digit key. If the Speed Dial Number is two-digit, press first digit key and then hold the second one. For example: If the Speed Dial Number is 25, you should press 2 key firstly, and then hold 5 key, thus it can dial directly.
5 Messages This is introduction of how to send, receive and erase the messages in your phone. Note：The function introduced hereinafter may differ with different service offered in your area. Please consult with your service provider for more detailed information. 5.1 Sending a New Message Please consult with the service provider to support the network service of sending message. You can only send message to the mobile phone which can receive message. 1. Select Menu→ Messages→ Write. 2.
20 receivers. Save: Save the message in Drafts. Template: To select template sentence. Names: To input the Names information. Priority: To set the SMS messages priority as Normal, Urgent or Emergency. Delivery Ack: Select On or Off for your phone can or can not automatically receive message from network informing you whether you have sent message successfully. Note: The SMS centers of some cities and regions do not support messages longer than 160 characters. 5.
3. Press OK key to read message. You can also press Up/Down key to scroll. 4. After reading, press Left select key to select: －Reply： Reply message to sender －Forward： Forward the message to other recipients. －Erase：Erase this message. －Voice Call：Call back to sender. －Save the number：Select sender’s number or the phone number in the message to save to names, select Name to save the new number in Phone or UIM, and select Existing Name to replace the existing number.
messages; erase messages one by one or all in Inbox, Outbox. 5.5.1 Deleteing a Message 1. Select Menu→ Messages. 2. Select messages location: Inbox, Outbox, Drafts. 3. Press Up/down key to select to-be-erased messages. 4. Select Left select key to Erase messages. “Delete” appears. 5. Select OK key/Left select key to delete this message. 5.5.2 Erasing All Messages 1. Select Menu→ Messages→Erase Msgs. 2. Select to-be-erased messages in Inbox, Outbox, Draft, or all Messges. 3.
Select Menu→ Message→Voice Mail→Call Voicemail to dial voice mail box number to listen to the leaving message following guide prompt. Note: The function needs network support. 5.6.2 Set Voice Mail Number 1. Select Menu→ Message→Voice Mail→Voice Mail Number. 2. Set Voice Mail Number. 5.7 Set Proformatted message The phone has a group of some common built-in phrases and sentences, such as, “Please call”, “I am busy now, call you later.” etc. 1. Select Menu→ Messages→ Templates. 2.
option you can: - Send: Send message to the recipient selected. - Send To All: Send messages to all the recipients in group. - Replace: Reedit the number in group. - Remove Member: Erase the recipients in group. - Clear Group: Clear all the recipients’ information in group. - Add: Add new recipient in group. Rename: Rename the Msg Group. Clear Group: Erase the SMS group. Clear All Groups: Erase all SMS group. Send: Send messages to the SMS group. The maximum of receivers not exceed 20 persons. 5.
Settings→ Delivery Ack. 2. Select On or Off for your phone can or can not automatically receive message from network informing you whether you have sent message successfully. 5.9.3 Auto Save 1. Select Menu → Messages → Msg Settings → Text Msg Settings → Save Sent Msg. 2. Select On or Off for your phone can or can not automatically save senting message. 5.9.4 Msg Signature 1. Select Menu → Messages → Msg Settings → Text Msg Settings → Signature. 2.
5.9.6 Save Position 1. Select Menu→ Messages→ Msg Settings→General→Save Position. 2. Select UIM or Phone and press OK key to save message in UIM card or phone. 5.9.7 Validity Period 1. Select Menu→ Messages→ Msg Settings→General→Validity Period. 2. Select Msg validity period as 1 Hour, 12 Hour, 1 Day, 1 Week, Maximum. 3. Press OK key. 5.9.8 Edit SMS on Call Reject 1. Select Menu→ Messages→ Msg Settings→General→Edit SMS on Call Reject. 2. Edit the information of SMS when you SMS reject a call.
All the contacts will be listed by the letter of the name. 1. Select Menu→Messages→Msg Settings→General→Fire Proof→Friend List. 2. Press OK key and select options: Add: Add new contact in Friend List. Edit: Edit this contact in Friend List. Delete: Delete this contact in Friend List. Clear all: Delete all the contacts in Friend List. If there is no contact in the list, “List Empty” will be displayed. Black List All the contacts will be listed by the letter of the name. 1.
List are not blocked. Cancel All: Cancel barring setting. 5.9.10 Memory Status Select Menu→ Messages→Msg Settings→General→Memory Status. View the number of saved messages and maximum number of messages saved in phone and UIM card.
6 Settings Your phone has different functions in Setting to meet your requirement. They are: Display, Call, Security and Extras. 6.1 Display 6.1.1 Set Wallpaper You can select different wall papers as background in idle state. 1.Select Menu→ Settings→ Display→Wallpaper. 2. Press Up/Down Key to select Preset Wallpaper or Custom Wallpaper. 3. Press Up/Down Key to scroll the list and press OK key/Left Select Key to confirm. 6.1.2 Set Backlight During a call or pressing keys, the display lights on.
and shortens continues conversation and standby time. 6.1.3 Set Keypad Light When pressing keys, the lights on. You can set lighting duration and type. 1. Select Menu→ Settings→ Display→Keypad Light. 2. Select an option in pop-up window: －Always off: No Light when pressing keys. －5 Sec：Keep light for 5 seconds after last pressing. －10 Sec：Keep light for 10 seconds after last pressing. 3. Press OK key to confirm. 6.1.4 Set Intensity 1. Select Menu→ Settings→ Display→ Intensity. 2.
6.1.7 Set Time Format 1. Select Menu→ Settings→Display→ Time Format. 2. Select AM/PM or 24 HR, and press OK key. 6.1.8 Chang Banner View and edit phone’s greeting to which appears on the display to your own. 1. Select Menu→ Settings→Display→ Banner. 2. Press OK key to Edit. 3. Key in character(s) and press Right Select key to erase character(s). 4. Press OK key to Save. 6.1.9 Set Date Format 1. Select Menu→ Settings→ Display→ Date Format. 2. Select MM/DD/YYYY, YYYY/MM/DD or DD/MM/YYYY, and press OK key. 6.
2. Set type of Call Forwarding, press OK key. －Immediate: All is diverted Immediately in all conditions. －Busy(Divert when busy): When the phone is busy, divert. － No Answer(Divert when no answer): When there is no answer, divert. －Disable All：Cancel All Call Forwarding. 3. Select Enabled to activate Call Forwarding function. Select option, －Voice Mail to activate forwarding call to voice mail.
1. Select Menu→ Settings→ Call → Call Waiting. 2. Select Option: - Enable: To activate the Call Waiting function. The network will notify you of an incoming call while you have a call in progress. You can press Send key to get through the waiting call and switch one call to another. - Disable: To cancel the Call Waiting function. - Edit Feature Code: To edit the number to activate or disactivate Call Waiting. 6.2.3 Setting Any Key Answer 1. Select Menu→ Settings→ Call→ Anykey Answer. 2.
for standard based area or for network where standard based solution is not implemented. 1. Select Menu→Settings→ Call→ International Call 2. Select option, - Auto: “Do you want to activate this function?” display and press OK key to confirm. In standard based area, to activate international prefix “+” function instead of keying in international call prefix, e.g. “00”, otherwise, select “No”. See “3.1 Making a Call” for detail description.
Friend List, Black List, Current Settings. Friend List All the contacts will be listed by the letter of the name. 1. Select Menu→ Settings→Call →Fire Proof→Friend List. 2. Select options or scroll to one contact listed and select options: Add: Add new contact in Friend List. Edit: Edit this contact in Friend List. Delete: Delete this contact in Friend List. Clear All: Delete all the contacts in Friend List. If there is no contact in the list, “List Empty” will be displayed.
List are not blocked. Cancel All: Cancel barring setting. 6.2.9 IP-Dial Setting 1.Select Menu→ Settings→ Call →IP-Dial Setting. 2.Select Option - Add: Add new IP code. -Browse: to view all IP code you have received. Scroll to one number list and press OK key, you can Edit, Delete or Set Defaulted. 6.3 Security Setting Introduction to phone’s security options preventing others to avoid illegal use or acquire your phone’s personal information. Please input right phone Password and PIN code to enter.
key. 6.3.2 Setting Phone Lock 1. Select Menu→ Setting→ Security. 2. Input your phone password, press OK key. 3. Move to Handset Lock, select On, Off or Change Lock, press OK key. 6.3.3 Restore Settings Your phone offers factory default phone setting. You may modify some options when you use phone. You can also Restore Factory Default to renew some modified options to the origin. 1. Select Menu→ Setting→ Security. 2. Input your phone password, press OK key. 3.
key lock and time. 2. Select an option in pop-up window: －Off：Deactivate the function of phones’ key lock. －On：Deactivate the function of phones’ key lock. 3. Press OK key/Left select key to confirm. Note： - Hold # key to lock the keypad directly in standby mode. - In state of key lock, to make use of phone, unlocking code should be input prompted by phone on the display. 6.4.2 Alert 1. Select Menu→ Settings→Extras→ Alert. 2. Select an option on display and press OK key.
SW Version: Shows present software version of phone. HW Version: Shows present hardware version of phone. 6.4.4 Wap Settings 1. Select Menu→ Settings→Extras → Wao Settings. 2. Select an option on display and press OK key. －Access Point：Set access point. －Proxy Settings: to set proxy settings as Proxy 1 or Proxy 2.
7 Organiser 7.1 Scheduler 1. Select Menu→Organiser→ Scheduler. 2. Press Left/Right key or Up/Down key to select exact date you want to view in pop-up calendar window. Press OK key. 3. Scroll Up/Down key to select options. 7.2 Voice Memo ZTEC362+ supports Voice Memo function either in or not in conversation with a capacity of saving 5 pcs records in max. When there is no space in Voice Memo or Voice Memo is full, the phone prompts. 7.2.1 Recording in Normal 1. Select Menu→Organiser→ Voice Memo. 2.
display. Select Option to Erase: to erase the record. Info: the title, length, size, and time information of the record. Erase all: to erase all record list. Erase all: Erase all record. Note: The record saved in normal will be listed in Profiles→ Vibrate/Silent/General/Outdoor/Meeting/Handset→ Profile Edit →Ring Tone→ Ring Type→ Record Ring as a kind of ringer tone.You can select it or not as you like as ring of the phone.
With Message While recording in state of non-conversation, receive a message won’t stop recording. The phone prompts message alert without display message interface. With Others - Alarm: Prompts later. - Alert: Prompts later. - Power off automatically while recording. Save record automatically. Note: In state of non-conversation, record voice via MIC; In state of conversation, record voice via earpiece. 7.3 Alarm Set alarm alert at a certain time. Alarm alerts only when the phone is in power on. 1.
2. Select Start to make stopwatch timing. 3. Select Stop to stop timing. 4. Select Reset to clear the time record. 7.5 Calculator Use calculator to execute basic math calculation. 1. Select Menu→ Orginiser→ Calculator. Key in digits. Press Left/Right key or Up/Down key to choose “+”“-”“x”“/”according to the prompt. Press # key to input decimal point, and press * key to change digit to positive number or negative. Press OK key to display the result.
7.6 Unit Conversion 1. Select Menu→ Orginiser→ Unit Conversion. 2. Select Length, Temperature, Power, Volicity, Weight, Area, Volume, Capacity, Energy, or Pressure. 3. Press OK key to make conversion. 7.7 World Time 1. Select Menu→ Orginiser→ World Time. 2. Press Left/Right key to check the different cities time. 3. Press Left select key you can select the following Option: -Local City: Select the local city. -Query other time: Press Up/Down key to move the cursor up and down.
8 Profiles You can personalise your phone. There are many ways to change the sound and feel of your phone. 1. Select Munu → Profiles. 2. Press Up/Down key to select. － Silent: to set the phone in silence mode － General: to set the phone in ringer mode. － Outdoor: to set the phone in ringer with vibration mode. － Meeting: to set the phone in vibration mode. － Handset: to set the phone in earphone mode. 3. Select an option from the list and press OK Key. － Set: to set the current mode as the phone mode.
9 Call History 9.1 Viewing Recent Calls Information of All Calls, Missed Calls, Received Calls, Dialed Calls, Call Duration, Clear All including name, phone number, and call time and conversation duration is saved in the Call History. 1. Select Menu→Call History. 2. Select All Calls, Missed Calls, Received Calls, Dialed Calls. 3. Press OK key/Left select key. 4. Select one entry of the records and press Left select key. 5.
9.2 Erasing Recent Calls List 1. Select Menu→Call History→Clear All. 2. Select Erase Missed, Erase Received, Erase Dialed. 3. Press OK key/Left slect key to delete all the numbers from the list. 9.3 Call Duration 1. Select Menu→ Call History→ Call Duration. 2. Select an option from the list and press OK Key. －Last Dialed Call：Indicate the talk time of the last dialed call. The time can be reset. －All Dialed Calls：Indicate the talk time of all dialed call. The time can be reset.
10 U-MAX This function needs network support by service provider. If your UIM card can also support, menu of U-MAX appears on the display. If UIM Card and network provider don’t support, the function is invalid. The application of this function may ask for extra fee. Please contact with network provider to acquire more information.
11 Multimedia ZTE362+ provide the function of taking pictures and listening misic. 11.1 Camera 1. Select Menu→Multimedia→Camera. 2. Press OK key to take photes. 3. Select Option, press Up/Down key to select a following option. Settings: make various setting of taking phones. -Resolution: set the resolution as 480x640, 240x320, or 128x160. -Fun Frames: select the various fun frames. -Black/White: Select On or Off to set the phones as black/white or colours.
-Time Limited: Set the movie time as 6 sec, 12 sec or 3 min. -Take phote: take photes. -Movie Browser: view the movie saved in the phone. -Save Location: Set the save location of photos as phone. 11.2 Multimedia 1. Select Menu→Multimedia→Multimedia. 2. Press OK key to play Plasy List. 2. Select Option, press Up/Down key to select a following option. Play list: When Plsy list is empty, select Add, your phone display music files, press OK key to select files, and press Left select key to confirm.
Sound Effect: Press Up/Down key to set the sound effect. Speaker: Select On or Off to open or close the speaker. Help: See the help information. 11.3 File Manager 1. Select Menu→Multimedia→File Manager. 2. Press Up/Down key to select an option from the pop-up windows, picture: include picture in the file of phote, WAP, BREW. music:include music files in the file of record, WAP, BREW. video:Include video files in record movie and WAP. user: include the user’s others files. 3.
12 Games 12.1 Brick attack In this game, paddle the bar to rebound the ball and attack bricks with skill. And then enter next stage. 1. Select Menu→ Games→ Brick attack. 2. Press Left Select key or OK key, the display shows greeting and play guide. 3.Select Newgame to start, press Left/Right key to move the paddle bar left/right. Press Right select key to pause the game.. 4. As passing a stage, select Continue to next stage, select Exit to exit the game. 12.
13 Text Input Your phone offers text input modes: Multitap Input (abc/ABC), Numbers Input (123), eHiText Input (eng). Input mode includes capital letter and lowercase mode. You can key in letters, digits, characters and symbols when writing text or editing contact record information in Contacts or Messages etc., following the common instruction in hereinafter table. Operation Input Letters Method Multitap (abc/ABC) Input—“abc/ABC”, press corresponding letter key till the letter appears.
Input Space Press “0” key, except for being in numbers mode. Erase Character Press Right select key. Move cursor left or Press Left/Right key. right Change input mode Press # key to select another text mode. 10.1 Multitap Input Select Multitap Input (abc/ABC) — Each key stands for multiple letters. Press key till your letter appears. When the cursor moves, enter the next letter. 10.2 Numbers Input Select Numbers Input (123) — Press the corresponding key once to input the number.
10.4 Symbols Input -Press 1 key to input till the symbol appears. Most common punctuation marks and special characters are available. Or select Symbols mode by pressing * key: - Press Up/Down key to page down. And press digit key to enter corresponding symbol.
14 Troubleshooting If your phone appears following phenomenon in the process of application, please read following relative information at first. If the problems still can not be solved, please contact with the distributor or service provider. Problem Check Point When switching on the phone, it Please input your PIN Code which prompts “Enter PIN”. offered with UIM Card together. If you have changed PIN code, please input new PIN Code. You can also set PIN code deactivated, see “6.
No prompt tone at alarm time. Please check relative sound setting (Alert Type and ringer Volume in Profiles). Messages cannot be sent. Please network.
