ZTE-J G682 Digital Trunking Phone User Manual
Copyright © 2008 by ZTE Corporation All rights reserved No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. ZTE Corporation reserves the right to make modifications on print errors or update specifications in this manual without prior notice. Release: V1.
ZTE-J G682 Digital Trunking Phone Contents Before Use .......................................................... 9 Introduction ....................................................................................9 Safety Instructions .........................................................................9 Safety Warnings and Precautions ...............................................10 Parts Definition ............................................................................14 Battery.. ..............
ZTE-J G682 Digital Trunking Phone Exit from a Group Call ........................................................ 28 End a Group Call ................................................................ 29 End a Private Call ............................................................... 29 Broadcast Call ............................................................................. 29 PTT Emergency Calls ................................................................. 30 Functions during PTT Calls............
ZTE-J G682 Digital Trunking Phone View .....................................................................................39 Edit…… ...............................................................................39 Delete ..................................................................................40 Set Ringtone ........................................................................40 Rename ...............................................................................40 Move .....................
ZTE-J G682 Digital Trunking Phone SMS…................................................................ 52 Compose ..................................................................................... 52 Send out .............................................................................. 52 Phrases ............................................................................... 53 Save as Draft ...................................................................... 53 Cancel ...............................
ZTE-J G682 Digital Trunking Phone Smart Ring ...................................................................................62 Assistant ........................................................... 64 Calculator .....................................................................................64 Alarm Clock .................................................................................64 Add.......................................................................................64 View/Edit ........
ZTE-J G682 Digital Trunking Phone Quick Return to Idle Mode .................................................. 75 Delete the Current Input ..................................................... 76 Quick Set Profiles ............................................................... 76 Quick Entry into Menu ........................................................ 76 Quick Entry or Exit Power Save Mode during Calls .......... 76 Quick Change Call Attribute in Idle Mode ..........................
ZTE-J G682 Digital Trunking Phone Before Use Introduction Thank you for choosing ZTE-J G682 Digital Trunking Phone. Based on CDMA2000-1x technology, the mobile phone provides normal functions as well as PTT ( Push – to - Talk ) function.
ZTE-J G682 Digital Trunking Phone provide the service provider with your phone‟s ESN, which can be found on the back of the mobile phone after the battery is removed. Keep the ESN properly for future use. To protect your mobile phone against abuse, take the following precautions: - Set a PIN code ( if your mobile phone supports UIM card ) and modify it from time to time. - Don‟t leave your phone on the seat or other visible places when you are away from your car. Carry the phone or lock it in the trunk.
ZTE-J G682 Digital Trunking Phone measurements differ among phone models, depending upon available enhancements and FCC requirements.) While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines.
ZTE-J G682 Digital Trunking Phone radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
ZTE-J G682 Digital Trunking Phone devices, especially medical devices such as audiphone and pacemaker, fire detector and auto-control equipments such as auto-door. For details on the influence that your mobile phone would probably have upon pacemaker or other medical devices, consult the manufacturer or the local distributor. Do not use your mobile phone in gas station. Power off your mobile phone near fuels or chemicals.
ZTE-J G682 Digital Trunking Phone Keep tiny metal objects such as thumb pins away from the phone. The phone speaker is magnetic and thus magnetizes those metal objects, which may hurt people or damage the phone. Operation temperature range: -10℃~＋50℃, Storage temperature: -20℃~＋60℃ Use the original accessories or those authorized by ZTE.
ZTE-J G682 Digital Trunking Phone cool places. Otherwise it might cause leakage or overheating. This might affect the battery„s performance and shorten its life. Do not keep charging the battery continuously for more than 24 hours. Precautions for using the charger Use the power voltage between 110VAC and 220VAC. Using the voltage beyond the range may cause leakage, fire or damage to the phone and charger.
ZTE-J G682 Digital Trunking Phone Hold the charger rather than pull the power cable while removing the plug from the socket. Otherwise it might cause damage, electric shock or fire. Cleaning and maintenance Clean the phone, battery and charger with a soft dry cloth. Do not clean the phone with the liquor such as alcohol, dilution agent or benzene. Clean the socket at intervals because a dusty socket might cause disconnection, power failure, or even charging failure.
ZTE-J G682 Digital Trunking Phone Key Definition Name Description PTT Key Used to make PTT calls. During the conversation, hold the key to speak, and release it to listen. Up/Down Side Keys Used to adjust volume, or as shortcut to set call attribute. Shortcut to view PTT call history. The keys to view the current watching group at enhanced mode. The keys to set watching group at normal mode. Left Soft Key Correspond to the words at the bottom left corner of the screen. Used to view menu or confirm.
ZTE-J G682 Digital Trunking Phone Battery Install the Battery 1. Push the separation button on the back of the phone in the direction of the arrow and remove the back cover. 2.
ZTE-J G682 Digital Trunking Phone 3. Push the back cover in the direction indicated by the arrow until you hear the sound of “KA”. Remove the Battery 1. Remove the back cover. 2. Pull the battery in the direction indicated by the arrow and take out the battery.
ZTE-J G682 Digital Trunking Phone Charge the Battery The new battery is not fully charged, so please fully charge it before use. 1. Insert the phone and battery in the charger compartments and connect the charger to the electrical outlet. The red light on the charger will turn on. 2. When the charging is completed, the indicate light will turn to green. During the charging, you will find little warmer happening on the phone, the battery and the charger. It is a normal phenomenon. 3.
ZTE-J G682 Digital Trunking Phone Insert and Remove UIM Card Consult your network service provider whether your phone needs UIM card or not. Note Skip this section if your phone does not need UIM card. If UIM card is required, then your network service provider will provide a valid UIM to your mobile phone. At this point, UIM card is the key to CDMA network. New UIM card is generally put into a piece of card, which should be taken out carefully before installation. Follow the steps below: 1.
ZTE-J G682 Digital Trunking Phone 3. Please power off your phone to remove the charger and battery before taking out UIM card as shown in the figure below: Power on/off Power on Press and hold until you see power-on animation on the screen. If your phone supports UIM card and no UIM card is inserted, then your phone will prompt with “UIM card not detected” At this point, you need to power off your phone to reinsert a valid UIM card, and then power on.
ZTE-J G682 Digital Trunking Phone Note The PIN code of UIM card will be sent to you with UIM card together. If not, please consult your network service provider. Generally, the default PIN code is “1234”, and it‟s recommended to change it as soon as possible. Power off Press and hold until you see power-off animation on the screen. The screen becomes black after the phone is powered off. Text Input You could enter characters, numbers and symbols through standard alphanumeric keypad.
ZTE-J G682 Digital Trunking Phone Descriptions Select “ABC”/ “abc” input method; Each alphanumeric key corresponds to multiple letters. Press the appropriate alphanumeric key once to input the first letter that appears on the key, twice for the second letter, and so on. Continuously Press: After you press a key, firstly a black block appears at the cursor, and then an upright line. “Continuously Press” means pressing the key before the upright line appears. e.g.
ZTE-J G682 Digital Trunking Phone 1. Pinyin Input Method Stroke Input Method 2. 3. 4. 5. 1. 2. 3. 4. Press key to select Pinyin Input Method; Press the appropriate alphanumeric key to input Pinyin; Use key to select Pinyin; Use ▲▼ key to view the characters; Press OK and the appropriate alphanumeric key to input Chinese character.
ZTE-J G682 Digital Trunking Phone Sound comes out from earpiece Sound comes out from speaker New Short Message.
ZTE-J G682 Digital Trunking Phone Make and Receive PTT Call Adopting the method of Push-to-Talk, PTT calls are different from normal calls. PTT calls could be classified into Private Calls and Group Calls . PTT Private Calls provide one-to-one voice call service in CDMA network service area with PTT functions. Each PTT mobile phone has one unique PTT number, namely PTT private number. Dialing this number in PTT mode could make PTT private calls. You could save and view this number in Personal Book .
ZTE-J G682 Digital Trunking Phone 2. Dial from book; 3. Dial from call history. Direct Dial 1. Enter the desired PTT private number in idle mode; 2. Hold PTT key to start dialing, and talk after hearing a beep sound; 3. Release PTT key speak at this point. to release the floor. Listen to the other side to Dial from Book 1. Press Book in idle mode to access the phone book, and select Personal Book ; 2. Press ▲/▼ key to select your desired contact; 3.
ZTE-J G682 Digital Trunking Phone 3. Hold PTT key to start dialing, and talk after hearing a beep sound; 4. Release PTT key speak at this point. to release the floor. Listen to the other side to Make Group Calls You could make group calls in any of the following three ways: 1. Direct dial; 2. Dial from book; 3. Dial from call history. Direct Dial 1. Enter “#” firstly, and then the desired group numbers in idle mode; 2. Hold PTT key and talk after hearing a beep sound; 3.
ZTE-J G682 Digital Trunking Phone Dial from Call History 1. Press the Up Side key shortly in idle mode to display PTT calls list or press Menu and Select Call History to enter; 2. Press ▲/▼ key to select your desired group call record; 3. Hold PTT key to start dialing, and talk after hearing a beep sound; 4. Release PTT key to release the floor. Listen to the other members to speak at this point.
ZTE-J G682 Digital Trunking Phone End a Group Call During the conversation, all members in the group will exit from a group call after it is ended. Operation Method Press Select and select End Call during the conversation. Only the group caller or group leader has the authority to end a group call. Note End a Private Call Press key to end a private call, or press Select and select End Call to end it during the conversation. Broadcast Call Broadcast Call is an unilateral call.
ZTE-J G682 Digital Trunking Phone PTT Emergency Calls With the highest priority, emergency calls could be made through the emergency key . You can make the emergency call by the following ways: 1. In standby mode, enter “# + group number” or a private PTT number, then hold emergency key to send the call; 2. In Call History interface, choose a call number you want to send in emergency and hold the emergency key to send; 3.
ZTE-J G682 Digital Trunking Phone 2. Press ▲/▼ key to turn pages; 3. Press Back to return to the call interface. Group Members Status Query During PTT calls, you could inquire the status of all members in the current group. Operation Method 1. Press Select and then GrMembStat to view the number of both online and offline members; 2. Select Detail and then Online Member / Offline Member to view the detailed list of members; 3. Press Next to turn pages; 4. Press Back to return to the call interface.
ZTE-J G682 Digital Trunking Phone Group Members Management During PTT calls, you could manage the members in the group. Operation Method Press Select and then DynaManagement to perform corresponding operations (For details, please refer to section “DynaManagement” ) Upgrade Ordinary Calls to Emergency Calls During PTT calls, press Select and then Upgrade Call . Downgrade Emergency Calls to Ordinary Calls During PTT calls, press Select and then Downgrade Call .
ZTE-J G682 Digital Trunking Phone Make and Receive Normal Calls Normal calls mean CDMA traditional voice phone calls which you usually dial. Make Normal Calls You could make normal calls in any of the following three ways: 1. Direct dial; 2. Dial from book; 3. Dial from call history. Direct Dial Enter the desired phone number in idle mode and press key to dial it. Dial from Book 1. Press Book in idle mode, and select Personal Book ; 2. Press ▲/▼ key to select your desired contact; 3.
ZTE-J G682 Digital Trunking Phone Dial from Call History 1. Press key in idle mode to display Normal calls list or press Menu and select Call History to enter; 2. Press ▲/▼ key to select your desired phone record; 3. Press to dial the number covered by the highlighted bar. Receive Normal Calls Press key to receive an incoming call, and press to end it. End Normal Calls When you are making a call or already in a conversation, press key to to end it.
ZTE-J G682 Digital Trunking Phone Set the Mute During calls, press Select and select Mute or Unmute. If you select Mute , the word “Mute” will appear on the screen, and the other side couldn‟t hear your voice. If you select Unmute , you will exit from Mute , and the other side could hear your voice again. Switch the Sound During calls, you could receive the call either from the speaker or from the earpiece. During calls, press Select and select To Speaker or To Earpiece.
ZTE-J G682 Digital Trunking Phone Phone Book The book could be classified into personal book and group book . 1. Personal book manages the name and phone number of the contacts; 2. Group book manages PTT group names and PTT group numbers. Personal Book The contacts in personal book could be saved either in phone or in UIM card. There might be multiple phone numbers for each contact saved in phone, such as PTT private number, home number, office number, mobile phone number, other phone number.
ZTE-J G682 Digital Trunking Phone Add 1. In idle mode, press Book to select Personal Book , and press Option to select Add ; 2. Select location Phone or UIM and press Select to edit; ( If your phone doesn‟t support UIM card, please skip this step ). In phone 1. Press ▲/▼ key to move the cursor, and edit each item; : enter contact‟s name; 、 、 、 、 : enter the corresponding number. ：enter the remark. Spd.
ZTE-J G682 Digital Trunking Phone 2. Press Save to save the contents. Note Under the editing status, press [Clear] key to clear the inputs on the screen one by one, and hold [Clear] key to clear all the inputs on the screen. In UIM 1. Press ▲/▼ key to scroll the highlight between the highlighted item; and , and edit : enter contact‟s name. : enter the number. 2. Press Save to save the contents.
ZTE-J G682 Digital Trunking Phone Search by group 1. In idle mode, press Book to select Personal Book and then press Option to select Srch by Group ; 2. Press ▲/▼ key to select your desired group, and then press Option to select View to view all contacts in the group; 3. Press ▲/▼ key to select the contact you are searching for. Fast Matching Search 1. Press Book in idle screen, select Personal Book; 2. Enter the first three letters of the contact name using the keypads directly; 3.
ZTE-J G682 Digital Trunking Phone Delete 1. Firstly find the contact you want to delete ( Please see “Search” ); 2. Press Option to select Delete ; 3. Press Yes to confirm the deletion. Set Ringtone 1. In idle mode, press Book to select Personal Book and then press Option to select Srch by Group ; 2. Press ▲/▼ key to select the group you want to set ring tone for; 3. Press Option to select Set Ringtone ; 4. Press ▲/▼ key to select your desired group ringtone, and press Select to confirm.
ZTE-J G682 Digital Trunking Phone Move Move the record from phone to UIM card 1. In idle mode, press Book to select Personal Book ; 2. Press ▲/▼ key to select your desired record; 3. Press Option to select Move , and then select To UIM ; 4. Press Yes to confirm. Note When there are multiple numbers in the record, then each number will be saved as one single record in UIM card. Move the record from UIM card to phone 1. In idle mode, press Book to select Personal Book ; 2.
ZTE-J G682 Digital Trunking Phone Note When the length of name or number record in the phone exceeds the maximum length in UIM card, the records can‟t be transmitted to UIM card. Check Space In idle mode, press Book to select Personal Book , and then press Option to select Check Space . Delete All 1. In idle mode, press Book to select Personal Book ; 2. Press Option to select Delete All , and select Phone or UIM ; 3.
ZTE-J G682 Digital Trunking Phone Add 1. Enter User Book ; 2. Press Option to select Add to edit, press ▲/▼ key to move the cursor between Group Name and Group Number: Group Name: enter the group name; Group Number: enter the group number; You could refer to section “Text Input” when entering the above contents. 3. Press Save to save the contents. View 1. Enter User Book and press ▲/▼ key to select the PTT group you want to edit; 2. Press Option to select View ; 3.
ZTE-J G682 Digital Trunking Phone Delete All 1. Enter User Book; 2. Press Option to select Delete All ; 3. Press Yes to confirm. View System Book 1. In idle mode, press Book and select System Book ; 2. Press Read to view the group names and group numbers, and press Back to exit. Check Space 1. Enter User Book ; 2. Press Option to select Check Space .
ZTE-J G682 Digital Trunking Phone PTT Functions Users could operate all PTT functions and perform corresponding settings in PTT Functions . Enter PTT Functions : In idle mode, press Menu to enter, press ▲/▼// key to select , and press Select to enter. Watching Function If you have the authority for watching, press “PTT Function” and select Watching Function, you can start your watching settings. This feature makes your phone only receive the group calls which are set in the current watching list.
ZTE-J G682 Digital Trunking Phone Set Normal watching 1. Select Normal mode; 2. Press the Down Side key watching setting interface; shortly in idle screen to get into normal 3. Select or Desel. the group by left soft key, the marked group will be set as the watching group. Set Enhanced watching 1. Select Enhanced Mode in Watching Status; 2. Enter into Watching List interface and press left soft key to edit a watching list: Add: Add a new watching list.
ZTE-J G682 Digital Trunking Phone Call Attribute After “Call Attribute” is set, the PTT call made by the phone will be Ordinary PTT call or Pre-emptive Priority PTT call, and the corresponding icon will display in the status bar of the standby screen. Setting Method 1. Press PTT Functions to select Call Attribute ; 2. Press / key to select Normal or Pre-emptive ; 3. Press Save. Note Please refer to section “Quickly Change Call Attribute in Idle Mode” for details on call attribute setting shortcut.
ZTE-J G682 Digital Trunking Phone 4. Press OK after the number is entered. Group Member Status Query After “GrMembStatQry” is activated, you could query the status of group members during PTT group calls. ( For detailed operation method, please refer to section “Group Member Status Query” ). Setting Method 1. Press PTT Functions to select Supplement Svc , and then select GrMembStatQry ; 2. Select On to activate this function; 3. Select Off to deactivate this function; 4.
ZTE-J G682 Digital Trunking Phone PTT Call Number Identity Restriction After “PTT CNIR” is activated, other users could not see the number as you make a PTT call. Setting Method 1. Press PTT Functions to select Supplement Svc , and then select PTT CNIR ; press ▲/▼ key to select On , Off or Query ; 2. Select On to activate this function; 3. Select Off to deactivate this function; 4. Select Query to check if the function is activated or deactivated.
ZTE-J G682 Digital Trunking Phone Dynamic Management You could add / delete the group members, set priority of the group members, and set the talk time. Note Only group leader has the authority to perform dynamic management for group members. Add/Delete Setting Method 1. Press PTT Functions to select DynaManagement , and then select Add Member or Delete Member ; 2. Enter Group Number and Member Number, or press Option to select from Book ; 3. Press Option and select Save .
ZTE-J G682 Digital Trunking Phone Set Talk Time Setting Method 1. Press PTT Functions to select DynaManagement , and then select Set Talk Time ; 2. Enter Group Number and Member Number and press / key to set your desired talk time; 3. Press Save . Emergency You could hold emergency key（ ）to make emergency call in idle mode when the emergency number is set. Setting Method 1. Press PTT Functions to select Emergency ; and press Select to enter; 2. Press / key to select the type as Group or Private ; 3.
ZTE-J G682 Digital Trunking Phone SMS You could edit, send, view, reply, forward, or delete short messages under SMS menu. The received messages are stored in the Inbox, the sent messages are in the Outbox, and the unsent messages are in the drafts. If your phone supports UIM card, from the inbox you can view the short messages saved both in the phone and in the UIM card. If your phone doesn‟t support UIM card, please skip the related contents about UIM card.
ZTE-J G682 Digital Trunking Phone Preset Phrases 1. Enter SMS , and select Compose Msg to compose a short message; 2. Press Option and select Preset Msgs. to edit the short message with the preset phrases in the phone. Save as Draft 1. Enter SMS , and select Compose SMS to compose a short message; 2. After entering the text, press Option and select Save as Draft to save the message in the drafts.
ZTE-J G682 Digital Trunking Phone View 1. Enter SMS , and select Inbox ; 2. Press ▲/▼ key to select the message you want to view, and press View to view it; 3. During viewing, press ▲/▼ key to view the whole message; press Option to select Reply , Forward , Delete , Save Number or Move to UIM ( Move to Phn ). Note [Move to UIM (Move to Phn)] is available only for the phones supporting UIM card.
ZTE-J G682 Digital Trunking Phone Outbox In the Outbox, you could view all of sent messages. 1. Enter SMS , and select Outbox ; 2. Press ▲/▼ key to select the message you want to view, and press View to view it; 3. During viewing, press ▲/▼ key to view the whole message; press Option to select Forward, Delete, and Save Number. Drafts In the drafts, you could view all of unsent messages. You could send it out after editing. 1. Enter SMS , and select Drafts ; 2.
ZTE-J G682 Digital Trunking Phone 1. Enter SMS , and select Settings ; 2. Press / key to select Phone First or UIM First . Set auto save Your phone has the feature of auto saving the SMS which you sent. If you turn on the function, all the sent SMS will be stored in your phone. 1. Enter SMS, and select Settings; 2. Press / key to select Yes or No. Delete All Your phone can clear the messages in the Inbox, Outbox and Drafts. 1. Enter SMS , and select Delete All ; 2.
ZTE-J G682 Digital Trunking Phone 2. Press ▲/▼ key to choose the desired message; 3. Press View to view the message. Edit 1. Enter into the view interface ( refer “Preset Messages – View “); 2. Edit the message, press Option and select the Save to save the edit message. Send 1. Enter into the view interface ( refer “Preset Messages – View “); 2. Press Option and select Send to to send the message directly.
ZTE-J G682 Digital Trunking Phone Call History Recent incoming calls, missed calls and outgoing calls are saved in Call History . The earliest call will be deleted automatically when the records are full. Call Icons Icons Descriptions Incoming Calls Missed Calls Outgoing Calls PTT Calls View There are two methods of viewing the call history: View from menu 1. In idle mode, press Menu to enter the main menu, press ▲/▼// key to select ( Call History ), and press Select to enter; 2.
ZTE-J G682 Digital Trunking Phone Quick view 1. In idle mode, press press the Up Side key key to view the list of normal calls; Short to view the list of PTT calls; 2. Press ▲/▼ key to select the record you want to view, and press Option to select View to view the details. Delete 1. Enter the list of call records ( refer to section “View” ); 2. Press ▲/▼ key to select the record you want to delete, press Option to select Delete to delete it. Delete All 1.
ZTE-J G682 Digital Trunking Phone Make Normal Calls 1. Enter the list of call records ( refer to section “View” ); 2. Press ▲/▼ key to select the normal call record you want to dial, and press key to call. Make PTT Calls 1. Enter the list of call records ( refer to section “View” ); 2. Press ▲/▼ key to select the PTT call record you want to dial, hold PTT key , and speak after hearing a beep sound. Send Message 1. Enter the list of call records ( refer to section “View” ); 2.
ZTE-J G682 Digital Trunking Phone Profiles In profiles, you could set different ringing modes for different occasions. There are several modes available in the phone, such as General, Silence, Meeting, Outdoors, etc., and you could also set Smart Ring. All modes could be changed, so you could select your individual mode according to your own requirements. Enter Profiles : In idle mode, press Menu to enter the main menu, press ▲/▼// key and select Select to enter. (Profiles) then press Activate 1.
ZTE-J G682 Digital Trunking Phone b) SMS Alert: Press ▲/▼ key to select SMS Alert . The operation is the same as Ringtone / vib . c) PTT Voice: Press ▲/▼ key to select PTT Voice , press OK to enter, press / key to select PTT voice from Speaker or Earpiece , and finally press Save to save the setting.
ZTE-J G682 Digital Trunking Phone 3. Enter a special Phone Number, or press Option to select number from Book ; 4. Press ▼ key to enter Ringer Tone, and press your desired ring tone; / key to select 5. Press Save (or press Option to select Save ) to complete the setting. Note When you set your own smart ring, the phone will not execute the preset ring tones which are set in the profiles or in the phonebook.
ZTE-J G682 Digital Trunking Phone Assistant Enter Assistant : In idle mode, press Menu to enter the main menu, press ▲/▼// key to select ( Assistant ), and press Select to enter. Calculator The phone provides a calculator, which you could use to perform basic math calculations. 1. Enter Assistant , and select Calculator ; 2. Press alphanumeric keys to input numbers, press key to input the decimal, press key to negative the numbers, and press ▲/▼//key to input calculation symbols “+/-/×/÷” ; 3.
ZTE-J G682 Digital Trunking Phone 3. Press ▲/▼ key to scroll the highlight, and edit each highlighted item: Time: Press alphanumeric keys to enter time; press / key to switch between hour and minute; / key to turn on/off the alarm ring; Press / key to select the day, on which alarm Set: Press Week: clock works; Note: Enter the remarks; 4. Press Save to save the setting. View/Edit 1. Enter Assistant , and select Alarm Clock ; 2. Press ▲/▼ key to select the alarm you want to view; 3.
ZTE-J G682 Digital Trunking Phone Set Alarm Ring 1. Enter Assistant, and select Alarm Clock ; 2. Press Option to select Set Alarm Ring ; 3. Press ▲/▼ key to select your desired ring, and then press Select . Calendar View Day 1. Enter Assistant , and select Calendar ; 2. Press ▲/▼// key to select your desired date, and press Option to select View Day ; 3.
ZTE-J G682 Digital Trunking Phone Delete 1. View the event on that day; ( Please refer to section “View Day” ) 2. Press ▲/▼ key to select the event you want to delete, and press Option to select Delete ; 3. Select Delete All to delete all events. World Time You could check the local time of major cities in the world. Check Cities 1. Enter Assistant , and select World Time ; 2. Press ▲/▼// key to check major cities in the world.
ZTE-J G682 Digital Trunking Phone Record Multiple Time Records in the Counting 1. Enter Assistant , and select Stopwatch ; 2. Press Start to start counting; 3. During the counting, press Record to save the record; you could press Record to save up to ten records at most; 4. Press Pause to stop counting; 5. Press Option to select Check Records to view all the records; 6. Press ▲/▼ key to view all of the records.
ZTE-J G682 Digital Trunking Phone Settings Enter Settings : In idle mode, press Menu to enter the main menu, press ▲/▼// key to select ( Settings ), and press Select to enter. Phone Idle Display You could change wallpaper or edit banner on the standby screen. Setting Method 1. Enter Settings to select Phone , and press Select to select Idle Display ; 2. Select Wallpaper , press ▲/▼ key to select the paper, and press Select to select it as standby wallpaper; 3.
ZTE-J G682 Digital Trunking Phone Language The phone supports different languages, and you could select your desired language. Shortcuts Set the function of quick entry in idle mode. Setting Method 1. Enter Settings to select Phone , and then select Shortcuts ; 2. Select any key from Left / Right keys, and press Select to enter; 3. Select the corresponding function of the key; 4. Press Select . Personal Info Store your personal information. Time Format Select the displaying format of time.
ZTE-J G682 Digital Trunking Phone Accessory Mode The phone provides accessory modes including PTT Mode and Voice Mode for you. In PTT Mode, hold the PTT key on the headset or monophone to make a PTT call. In Voice Mode, You can use the PTT key on the headset or monophone to make a normal voice calls by a short press and make a PTT call by holding it. Call The settings here are especially for normal calls. The settings for PTT calls could be performed in PTT Functions .
ZTE-J G682 Digital Trunking Phone Dial Restrict When this function is activated, you couldn‟t dial any number except for emergency number and free dial numbers. Activate the dial restricts: 1. Enter Settings to select Call and choose Dial Restrict; 2. After enter the password, select Dial Restrict ; 3. Press ▲/▼ key to select On. Free Dial You could set up to ten free dial numbers. If Dial Restrict is activated, these numbers will not be restricted. Set a free dial number: 1.
ZTE-J G682 Digital Trunking Phone Once you get a new phone, it‟s recommended to modify the password to guarantee the safety of information. Change Password 1. Enter old password; 2. Enter new password; 3. Enter new password again; 4. Press OK . Note If your phone needs UIM card, please read the following contents; otherwise please skip this section. Require PIN When it is set “On”, the phone requires PIN code of UIM card as powering on. Enter correct PIN code to unlock the phone. Chang PIN 1.
ZTE-J G682 Digital Trunking Phone Default Reset After you select Default Reset , the phone settings will return to the factory default settings.
ZTE-J G682 Digital Trunking Phone Appendix Shortcut Speed Dial Speed Dial Normal Calls Speed dial refers to quickly dial out the numbers in Personal Book in idle mode. To quickly dial out numbers, you need firstly enter Settings to select Call , then select SpdDial Restrict to enter, and finally select Off . Operation Method If you want to dial the number ranking 132, firstly input “13”, and then hold the alphanumeric key “2” until the number is dialed.
ZTE-J G682 Digital Trunking Phone Delete the Current Input During the input status, press Clear to delete the current inputs one by one, and hold Clear to delete all the current inputs. Quick Set Profiles In a conference room or on other public occasions, you could conveniently set the phone in Silence mode or other modes. In idle mode, hold key to scroll the highlight among General , Silence , Meeting ,and Outdoors , and release key until the highlight is at your desired mode.
ZTE-J G682 Digital Trunking Phone Quick Change the Current Watching List In idle mode, press the Down Side key to view the current watching. If the current watching mode is Normal Watching, please refer to the section “Watching Function” to change the current watching list. If the current watching mode is Enhanced Watching, the screen will display the current watching list, you can press / key to choose the watching list and set it as the current watching list.
ZTE-J G682 Digital Trunking Phone Receive or End Normal Calls with Earphone With PTT key on your earphone, you could receive or end a normal call. When there is an incoming call, you could receive it by holding PTT key on your earphone for about 0.5 second. When you are already in a call, you could use PTT key on the earphone to end the call. FallBack Your phone has a FallBack function. When there are some troubles on PTT system, the phone will start FallBack mode.
ZTE-J G682 Digital Trunking Phone Deceasing of battery performance Replace the battery Poor network signal Power off as network signal is poor Poor network signal Move to other places Out of the service area Confirm whether it is in the CDMA network service area Service unavailable Contact the operators Network disconnected Refer to “Network Connection Failure” Call drop during a call Poor network signal Move to other places No ring for a incoming call The phone is set to Silence, or the ri
