H520 CDMA/GSM Dual-Mode Handset User Manual
Copyright © 2007 by ZTE Corporation All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice. st Edition: 1 edition, Sep. 2007 Version No.: Release 1.
Content 1 General Information..................................................... 7 1.1 Welcome ............................................................................... 7 1.2 Security................................................................................. 7 1.3 Safety Warnings ........................................................... 8 1.4 Limit Warranty .................................................................... 12 1.5 Limitation of Liability .................................
3.2.2 Setting Any Key Answer............................................... 26 3.2.4 Incoming Call Silence .................................................. 27 3.3 In Conversation ................................................................... 27 3.3.1 Silence in Conversation ................................................ 27 3.3.2 Adjusting Volume in Conversation ................................ 27 3.3.3 Selecting Options in Conversation ................................ 27 3.4 Menu Functions.........
.1 Sending a New Message ...................................................... 35 5.2 Sending Messages ............................................................... 36 5.3 Receiving Incoming Call while Editing Message .................. 36 5.4 Reading Message................................................................. 36 5.5 Viewing OutBox.................................................................. 37 5.6 Erasing Messages ................................................................ 37 5.
7.1 Sound.................................................................................. 45 7.1.1 Volume ........................................................................ 45 7.1.2 Ring of Incoming Call .................................................. 45 7.1.3 SMS Ring .................................................................... 46 7.1.4 Ring of Power On/Off .................................................. 46 7.1.5 Alert Type .............................................................
.4 Security Settings.................................................................. 53 7.4.1 Setting Phone Lock ...................................................... 54 7.4.2 Restoring ..................................................................... 54 7.5 Extras.................................................................................. 54 7.6 Network Setting................................................................... 55 8 Toolkit....................................................
10.2 Numbers Input................................................................... 64 10.3 eHiText Input .................................................................... 64 10.4 Symbols Input ................................................................... 65 11 Troubleshooting ..........................................................
1 General Information 1.1 Welcome Thank you for choosing ZTE H520 CDMA GSM Dual-Mode Handset. To guarantee the mobile phone always in its best condition, please read this manual carefully and keep it for future use. The pictures, symbols and contents in this manual are just for your reference. They might not be completely identical with your phone. Please subject to the real object.
1.3 Safety Warnings To the Owner n Some electronic devices are susceptible to electromagnetic interference sent by mobile phone if inadequately shielded, such as electronic system of vehicles. Please consult the manufacturer on the device before using the phone if necessary. n Operating of mobile phone may interfere with medical devices like hearing aides and pacemakers. Please always keep the mobile phone more than 20 centimeters away from such medical devices when the phone is powered on.
radio frequency (RF) energy. Therefore, power off your phone if required. n Pay attention to traffic safety. Do not use your mobile phone while driving. Park before making or answering a call. n Store the phone out of the reach of little children. The phone may cause injury if used as a toy. n The phone has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
help. Mobile Phone n Please use original accessories or accessories that are authorized by the manufacturer. Using any unauthorized accessories may affect your mobile phone’s performance, and violate related national regulations about telecom terminals, or even endanger your body n If you want to clean your phone, please use clean fabric that is a bit wet or anti-static. Do not use harsh chemical cleaning solvents or strong detergents to clean it. Turn off your phone before you clean it.
n Do not attempt to disassemble the mobile phone and battery by yourself. Changes and modifications made to the phone without the approval of manufacturer could void your authority to operate this phone. n Do not charge the mobile phone without battery. n On occasion of emergent calling, keep your phone in status of power on and in area of service. On the condition of standby, press the key to enter emergency phone number, and then press Send key to make a phone call.
Safety and General Using in Vehicles n Before making or answering a call, you should pay attention to the local laws about using wireless mobile phones and take them into account in practical use. n Safety airbag, brake, speed control system and oil eject system shouldn’t be affected by wireless transmitting. If you do meet problems above, please contact your automobile provider.
(a) Reasonable abrasion. (b) Misuse including mishandling, physical damage, improper installation, unauthorized disassembly of the product. (c) Water or any other liquid damage. (d) Any unauthorized repair or modification. (e) Power surges, lightning damage, fire, flood or other events outside ZTE’s reasonable control. (f) Use of the product with any unauthorized third party products such as generic chargers. (g) Any other cause beyond the range of normal usage for products.
in connection with using this product, whether or not ZTE had been advised, knew or should have known the possibility of such damages. 1.6 Declaration We,ZTE Corporation, declared that the product is installed with battery separately in the box.The FCC ID label is placed on the mobile phone clearly visible to all persons at the time of purchase.
2 Know Your Phone 2.1 Keypad Earphone Earphone Charger connector LCD screen 4-way scroll key Left select key Right Send key select End key 0~9 Number key Microphone Key Tip Function Description u Make or answer a call. u Press Send key in standby mode to Send key enter recent All Calls list. u Press Send key two times directly to redial the last number.
u End an active call or reject a call. End key u Power on/power off. u Exit from any interface to standby mode. Left select key u Enter main Menu in standby mode. u Switch to the options of left bottom submenu. Right select key u Enter Names menu in standby mode. u Switch to the options of right bottom submenu. u Erase character(s) while editing. Cancel operation, eixt to previous pop-up window. u Confirm the commands and options selected.
display. u In standby mode, hold Up key to set Silence All; u Press Up key to enter Messages menu. u Press Down key to switch between GSM and CDMA network. u Used as direction key in games u Scroll the cursor left and right. u Used as selection key to scroll cursor left and right for keying in commands and selecting options Left/Right shown on the display. key u In standby mode, press Left key to (Scroll key) enter Toolkit menu, press Right key to view Sound menu. u Adjust volume in conversation.
* key: u Hold * key in standby mode to enable/disable vibration. u Press * key once to enter Symbols mode when edit text. Note: To “press” the key in this manual means to press the key and release it. To “hold” the key means to keep pressing the key for two seconds or more. 2.
Silence All Alarm Keypad locked Power indicator 2.3 Technical Parameters Handset Type ZTE H520 （Width×Height×Thickness） Dimensions 46mm×105mm×16 mm Weight About 82g(Battery Included) Battery Continuous time standby Continuous talk time About 150h (Subject to Network) About 3h (Subject to Network) Note: Please refer to the real phone for other relative parameters of the battery and charger. 2.4 Battery The attached Li-ion battery along with the phone can be used after unpacking.
2.4.1 Remove and Installation of Battery u Remove：(1) Press and push the back-cover of the phone down to release and remove it off the phone. (2) Put finger on the top finger grips, and then lift up the battery from the finger grips to remove the battery. u Installation：(1) Replace the battery into the battery slot, to be noted that the lower end of the battery firstly inserted. (2) Put the back-cover of the phone flatly upon the body of phone.
2.4.2 Charging the Battery u Plug out rubber away from the jack on the bottom of the handset and connect the lead from the charger to the socket on the bottom of the phone. (Note: The side with arrow should be upright while connecting). u Connect the charger to a standard wall AC socket. u Meanwhile, the charging indicator in up-right corner of the display flops cyclically, indicating the charging is going.
charge indicator. If the battery is completely flat in storage or used up, it may take for a while before the charging indicator appears on the display or any calls can be made. u When the charging indicator on the screen stops flopping, the charging is completed. The charging takes usually up to 2～3 hours (6～8.hours suggested for the first three times) In the process of charging, it is a normal phenomenon that the battery, phone and charger get into hot accordingly.
2.5 Connecting to the Network Press and hold End key to power on/off the phone.The phone automatically searches the network available and in state of standby mode. Besides sending and receiving calls, you can also do: u Press Left select key to enter main Menu. u Press Right select key to enter Names menu. u Hold # key to lock phone’s keypad. * key to enable/disable viration mode. u Hold u Press OK key in standby mode to enter MobileShip menu. u Hold Up key to set the phone in Silence All.
3 Basic Operations 3.1 Making a Call Please ensure that you are in the place where the signal can be received. Examine network signal strength icon on the screen. The more the indication bars, the stronger the intensity of receiving signal is. If there is no bar, please move to the place where the intensity of receiving signal is better. Sometimes, you only need to change the direction.
Country code + Area code + Telephone number 0086 u 755 26770000 Making Recent Calls All calls you recently dialed, received or missed are saved in your phone. All numbers are grouped as Missed Calls, Received Calls and Dialed Calls. When the list is full, the oldest number will be erased automatically when new record is coming. You can check the list as follows: ² In standby mode, press Send key to view All Recent Calls. ² The number listed in can be directly dialed by pressing Send key.
3.2 Answering a Call When a call is incoming in standby mode, the phone will offer corresponding ringer or vibration to prompt according to your settings. With the number already saved in Names, the phone also shows the name of caller meanwhile. • Press Send key to answer an incoming call. • Press End key to end a call and the call duration is temporarily displayed. See “7.3 Call Setting” or refer to other ways of answering calls for your option as follows. 3.2.
3.2.4 Incoming Call Silence • When a call is coming, press Right select key to select Mute/Unmute the ringer tone. • This function silences the current incoming call only. The phone will ring normally as next call coming. 3.3 In Conversation 3.3.1 Silence in Conversation During conversation, you can select Option (Names or Messages) or Mute displayed. Select Mute to let the other party temporarily not hear your voice; Select Unmute back to normal. You can also enter Names or Messages during a conversation.
3.4 Menu Functions u i. Main Menu Function: In standby mode, press Left select key to enter main Menu. Scroll Up/Down or Left/Right key through the menu and select functions according to the prompt on the screen. ii. If the menu contains submenus and further submenus, select options and submenu you want according to the prompt on the screen. iii. Press OK key or Right select key to set or return to the previous menu. Press End key to exit to standby mode.
4 Names You can save contacts in phone. Each contact in phone’s memory has three phone numbers. 4.1 Finding Records You can search for a name or number in Names in pop-up window. 1. Select Menu → Names. 2. Select one contact record and choose Search in Option. You can key in the first characters of the name you are searching for to view contact directly in All List. 3. Press Up/Down key to scroll though the corresponding name(s) and records in the list.
1. Select Menu→Names. 2. Select one contact record and choose Add New Entry in Option and then select saving contact in Phone. Add Name/Group/Home Number/Mobile Number/Work Number of the contact. See “10. Text Input” more instructions for writing text and character. 4. After the completion of writing, press Left select key or OK key to save the contact. 5. Scroll to the just-added phone contact to reedit, press Left select key or OK key to to do further operation: ² Edit: Edit the contact.
4.3 Viewing Records 1. Select Menu→Names. 2. Select one contact and View details of the information. Note: When there is no storage record in Contacts, it will indicate “No item”. 4.4 Erasing Records 4.4.1 Erasing a Record 1. Select Menu →Names. 2. Scroll to the record you want to erase and press Left select key. 3. Select Delete in Option. 4. Press Left select key. “Confirm to delete?” indicated on the display. 6. Press Left select key to select Ok. 4.4.
and rewrite the name. 6. Select Save, “Succeed to save”appears on the display. 4.6 Editing Phone Number 1. Select Menu→Names. 2. Scroll to the record you want to edit and press OK key. 4. Select Option to Edit number, and press Left select key or OK key. 5. Press Right select key and press number key to erase and key in digit of phone number. 6. Select Save. “Succeed to save” appears on the display. 4.7 Selecting Group You can group the stored records into Names. 1. Select Menu→Names. 2.
Number 3. Press Left select key or OK key to save. 4.9 Setting Speed Dial In standby state, you can make a Speed Dial of stored number by keying in one digit (1-9). 1. Select Menu→Names. 2. Select one contact record and choose View details in Option and Set speed dial. 3. Press Left select key or OK key and select an Empty slot in list. 4. Press Left select key or OK key. “Succeed to save” appears on the display. 4.10 Viewing and Making Speed Dial Viewing： Select Menu→Names.
Speed Dial Number is one-digit, directly hold the digit key. If the Speed Dial Number is two-digit, press first digit key and then hold the second one. For example: If the Speed Dial Number is 25, you should press 2 key firstly, and then hold 5 key, thus it can dial directly. Note: Some handset may not support method 1. Some handset support only one-digit speed dial number, some support both one-digit and two-digit speed dial number. 4.11 Memory Status 1. Select Menu→Names. 2.
5 Messages This is introduction of how to send, receive and erase the messages in your phone. Note：The function introduced hereinafter may differ with different service offered in your area. Please consult with your service provider for more detailed information. 5.1 Sending a New Message Please consult with the service provider to support the network service of sending message. You can only send message to the mobile phone which can receive message. 1. Select Menu→ Messages→ New SMS. 2.
Note: The SMS centers of some cities and regions do not support messages longer than 160 characters. The phone can support 480 English characters max. for SMS length. 5.2 Sending Messages You can send messages to grouped mobile phone which can receive message meanwhile. 1. Select Menu→Messages→New SMS. 2. Write message text. 3. Select any receiver in Contacts or key in the numbers to add to SMS groups separated with semicolon by pressing # key.
automatically saved in phone. A character on display indicates the memory for message is reaching full. Erase old messages to keep space for new messages. 1.Select Menu→ Messages→ Inbox. 2. Scroll to the message you want to read. 3. Press OK key to read message. You can press Up/Down key to scroll the pages. Or press Left select key directly to Delete or Delete all the message(s) in Inbox. 4. After reading, press Left select key to do the options: －Forward： Forward the message to other recipients.
memory. You can select erasing messages when sending or reading messages, erase messages one by one or all in Inbox, Outbox. 5.6.1 Erasing a Message 1. Select Menu→ Messages. 2. Select messages location: Inbox, Outbox. 3. Press Up/down key to select to-be-erased messages. 4. Press Left select key directly to Delete the message in Inbox or Outbox.Select Delete to erase messages. “Delete?” appears. 5. Select Ok to erase this message. 5.6.2 Erasing All Messages 1. Select Menu→ Messages. 2.
prompt. Select Setting No. to set the voice mail number. To read your voice mail, dial the voice mail box number in standby mode. Note: The function needs network support. 5.8 Message Settings You can set your message box before you use it, such as, Auto Save, Auto Delete, Set Idiom, Alert Setting, Delivery Ack, Msg Priority, and Memory Status. 5.9.1 Saving Sent Message 1. Select Menu→ Messages→Msg Settings→ Auto Save. 2. Select On or Off for your phone can or can not automatically save sent message. 5.9.
1. Select Menu→ Messages→Msg Settings → Set Idom. 2. Select the message listed in and. Press Left select key or OK key to view. 4. Press Left select key or Ok key to edit, send message, see “5.1 Sending a new message” in detail. 5.9.4 Messages Alert 1. Select Menu→ Messages→ Msg Settings→ Alert Setting. 2. Select the mode of alert as Once or Cyclic when receive a message. 5.9.5 Delivery Acknowledging 1. Select Menu→ Messages→Msg Settings→ Delivery Ack. 2.
messages and maximum number of messages saved in phone. For example: Phone: 8/50, indicating that 50 records entries in Max., out of which 8 have be saved in phone.
6 Call History 6.1 Viewing Recent Calls Information of All Calls, Received Calls, Dialed Calls, Missed Calls, Clear all, Call timers including name, phone number, and call time and conversation duration is saved in the Call History. 1. Select Menu→Call History. 2. Select All Calls, Missed Calls, Received Calls, Dialed Calls. 3. Press Left select key or OK key. Select one entry of the records and press Left select key or OK key. 4.
- SMS：Send message to this number. - IP：Send a IP call if already set. - Black List：Add this number to the Black List. 6.2 Erasing Recent Calls List You can erase all the Recent Calls in the menu of Call History. 1. Select Menu→Call History. 2. Select All Calls, Missed Calls, Received Calls, Dialed Calls. 3. Press Left select key or OK key. Select one entry of the records and press Left select key or OK key. 4. Select Clear all to delete all the numbers from the list. 6.
GSM network. The timer can be reset. －Gsm Outgoing Calls：Indicate call time of all dialed call in GSM network. The timer can be reset. －Gsm All Calls：Indicate call time of all dialed and answered call in GSM network. The timer can be reset. 3. Select Reset to clear data, the timer is set to zero.
7 Settings In main Menu pop-up window, select Settings to enter into. Your phone has different functions in Settings g to meet your requirement. They are: Sound, Display, Call Setting, Security, Extras, and Network. 7.1 Sound 7.1.1 Volume You can adjust the volume of Ringer, earpiece and key beep. 1. Select Menu→ Settings→ Sound→ Volume. 2.Select the volume of Ringer (When earpiece is inserted, it is earpiece Ringer), Earpiece or Key Beep. 3. Press Left/ Right key to adjust volume. Press OK key. 7.1.
1. Select Menu→Settings→ Sound→ Ring→ Ring Type. 2. Press Up/Down key to scroll to your selection in Preset Ring, DownLoad Ring or Record Ring press OK key. 7.1.3 SMS Ring You have a choice of various ringing tones for message in phone. 1. Select Menu→Settings→ Sound→Ring→ SMS Ring. 2. Press Up/Down key to scroll to select and press OK key. 7.1.4 Ring of Power On/Off You can make a choice of various ringing tones when power on/off the phone. 1. Select Menu→Settings→ Sound→Ring. 2.
－Silence All：Set mobile phone in silent case to prompt. 7.1.6 Key Beep Set phone beep sound or not when you press keys. 1. Select Menu→Settings→ Sound→ Key Beep. 2. Select an option: －Off： Not utter sound when press keys. －Standard：Utter a fixed- length DTMF tone in short when press keys. －Long： Utter DTMF tone even longer when press keys. 7.2 Display 7.1.1 Selecting Wall Paper You can select different wallpaper as background of standby. 1. Select Menu→ Settings→ Display→ Wall Paper Set. 2.
－30 Sec：Keep backlighting for 30 seconds after last pressing. 3. Press Left select key or OK key to confirm. Note：In conversation, backlighting consumes the power quickly and shortens continues conversation and standby time. 7.2.3 Adjusting Brightness 1. Select Menu→ Settings → Display→ Brightness. 2. Press Left/Right key to adjust brightness, and press Left select key or OK key to confirm. 7.2.4 Adjusting Contrast 1. Select Menu→Settings→ Display→ Contrast 2.
7.2.7 Setting Time Format 1. Select Menu→Settings→Display→Time→Time Format. 2. Select AM/PM or 24 HR, and press Left select key or OK key. 7.3 Call Settings When network supports Call Setting, you can use network services of call waiting and call forwarding. Note：All these functions are network services. Please consult with network service provider to get corresponding service application. 7.3.
7.3.3 Voice Privacy Set as Enhanced to enable voice encryption (need network support). Set as Standard to disable this function. 7.3.4 Alert You can select On or Off to set the alert. 1. Select Menu→Settings→Call Setting→Alert. 2. Select an option on display and press Left select key or OK key. －Service：When there are service available. －Remind Minute：During a call, ten seconds ahead of every minute, alert. －Missed Call： When there are missed calls, alert.
1. Select Menu→ Settings→ Call Setting→Supp.Services→ Call Waiting. 2. Select Option: - Enabled: To activate the Call Waiting function. The network will notify you of an incoming call while you have a call in progress. You can press Send key to get through the waiting call and switch one call to another. - Disabled: To cancel the Call Waiting function. 7.3.6 Call Forwarding Use Call Forwarding to forward the incoming call to a designated phone number.
Left select key or OK key. E.g. To forward incoming call to 12345678, input: 12345678, press Left select key or OK key and confirm. 4. Select Disabled to disable Call Forwarding function. 5. Press End key to exit to previous pop-up window. 7.3.7 Fire Proof You can set Incoming calls bar in Fire Proof submenu including Friend List, Black List, Current Settings. u Friend List All the contacts will be listed by the letter of the name. 1. Key in phone number to Add new contact directly, or select from Names.
² Add: Add another new contact in Black List. ² Edit: Edit this contact in Black List. ² Delete: Delete this contact in Black List. ² Clear all: Delete all the contacts in Black List. If there is no contact in the list, “List Empty” will be displayed u Current Settings You can set barring applications as follows: ² Bar Black List: Only bar numbers listed in Black List. ² Bar All Except Friend List: Only numbers listed in Friend List are not blocked. ² Cancel All: Cancel barring setting.
7.4.1 Setting Phone Lock 1. Select Menu→ Settings→ Security. 2. Input your phone password, press OK key. 3. Move to Handset Lock, set On,Off or Change Lock, press Left select key or OK key. 7.4.2 Restoring Your phone offers factory default phone setting. You may modify some options when you use phone. You can also Restore Factory Default to renew some modified options to the origin. 1. Select Menu→ Settings→ Security. 2. Input your phone password, press Left select key or OK key. 3. Select Restore Settings.
－Off：Deactivate the function of phones’ key lock. －30 S auto-guard：Phones’ key locked automatically 30 seconds after the last key pressing. －2 M auto-guard：Phones’ key locked automatically 2 minutes after the last key pressing. 3. Press Left select key or OK key to confirm. Note： - Hold # key to lock the keypad directly in standby mode. - In state of key lock, to make use of phone, unlocking code prompted by phone on the display should be input. 7.5.2 Gsm Modual Status 1.
8 Toolkit Extra offers some tools, such as, Radio, Calendar, Alarm Clock, Calculator, Voice Memo, Stopwatch World Time, and Sales Service. 8.1 Radio ZTE H520 supports Radio function. 1. Select Menu→Toolkit→ Radio. 2. Insert earphone and then the phone notify on the display “Radio On!”, so the radio is activated. 3. Select any of the Option as follows: ² Save Channel: Input Channel Name and select one channel from Channel List.
your new inputting. ² Rename: Reedit the channel name. ² Set Volume: Press Up/Down key to adjust the volume of earphone. 8.2 Calendar 1. Select Menu→Toolkit→ Calendar. 2. Press Left/Right key or Up/Down key to select exact date you want to view in pop-up calendar window. 3. Press Left select key or OK key to view in details. 8.3 Alarm Set alarm alert at a certain time. Alarm alerts only when the phone is in power on. 1. Select Menu→Toolkit→ Alarm clock. 2.
you want, press OK key. ÷ Division Sign - Subtraction Sign = Equal Sign + Plus Sign x Multiply Sign . Decimal Point ± Change digit to positive number or negative Press Right select key to erase digit one by one and exit to previous window, press End key to exit to standby mode. Note：This calculator has a limited accuracy and is designed for simple calculations. 8.5 Voice Memo ZTE H520 supports Voice Memo function either in or not in conversation with a capacity of saving 5 pcs records in max.
to begin a new Recording, or Stop/ Pause recording. ² Record List – Play or Delete the record listed and named by date and time. ² Memory Space – Check memory used already out of record capacity. Note: The record saved in normal (not in conversation) will be listed in Settings→ Sound→ Ringer Type as a kind of ringer tone.You can select it or not as you like as ring of the phone. The record can not be deleted as if it is activated as the ringer, unless you cancel the record as the ring of the phone. 8.5.
² With Message While recording in state of non-conversation, receive a message won’t stop recording. The phone prompts message alert without display message interface. ² With Others - Alarm: Prompts later. - Alert: Prompts later. -Power off automatically while recording: Save record automatically. Note: In state of non-conversation, record voice via MIC; In state of conversation, record voice via earpiece. 8.7 Stopwatch 1. Select Menu→Toolkit→ Stopwatch. 2. Select Start to make stopwatch timing. 3.
8.9 Sales Service ZTE H520 has specific Sales Service Number fixed in the phone for you easy to dial.
9 Games Extra offers two games: Brick attack and Push Box . 9.1 Brick Attack In this game, paddle the bar to rebound the ball and attack bricks with skill. And then enter next stage. 1. Select Menu→ Extra→ Games→ Brick attack. 2. Press Left select key or OK key, the display shows greeting and play guide. 3.Select Newgame to start, press Left/Right key to move the paddle bar left/right. Press Right select key to pause the game.. 4.
10 Text Input Your phone offers text input modes: Multitap Input (abc/ABC), Numbers Input (123), eHiText Input (eng), and Symbol Input (Symbols). Input mode includes capital letter and lowercase mode. You can key in letters, digits, characters and symbols when writing text or editing contact record information in Names or Messages etc., following the common instruction in hereinafter table. Operation Input Letters Method Multitap Input—“abc/ABC”, press corresponding letter key till the letter appears.
mode. Erase Character Press Right select key . Move cursor left or right Change input mode Press Left/Right key. Press # key to select another text mode. Capitalization Press # key to switch between capitalization (ABC) and lowercase (abc). 10.1 Multitap Input Select Multitap Input (abc/ABC) — Each key stands for multiple letters. Press key till your letter appears. When the cursor moves, enter the next letter. 10.
If the word displayed is not the word you want, press Up/Down key to look for another matching word. Then press OK key to confirm. 10.4 Symbols Input - Press 1 key to input till the symbol appears. Most common punctuation marks and special characters are available except for Numbers Input mode. Or select Symbols mode by pressing * key : - Press Up/Down key to page down. And press digit key to enter corresponding symbol.
11 Troubleshooting If your phone appears following phenomenon in the process of application, please read following relative information at first. If the problems still can not be solved, please contact with the distributor or service provider. Problem Check Point No key beep on pressing keys. Please check the setting of Key Beep in Settings. When there is an incoming call, Please check the setting of sound the prompt ringer not rings. Alert Type and ringer Volume in Settings.
