User Manual

Confidential and Proprietary Information of ZTE CORPORATION 34
C h a p t e r 7
Getting Connected
Connecting to the Internet
Your device‟s networking capabilities allow you to access the Internet or your corporate network.
Ways of Connecting to the Internet
You can use the default connection settings to connect to the Internet through your mobile network
(GPRS/3G/EDGE), or Wi-Fi.
GPRS/3G/EDGE
Use GPRS/3G/EDGE to connect to the Internet and to send and receive MMS/Email messages on your
V9C. You will need a data plan to use your wireless service provider‟s GPRS/3G/EDGE network. Check
with your wireless service provider for GPRS/3G/EDGE rates. If the GPRS/3G/EDGE settings are not
pre-configured on your device, contact your operator for the parameters. Do not change the settings as this
may cause services to stop working.
Add a new GPRS/3G/EDGE connection
Before you begin, get the following information from your service provider:
• Access Point Name (APN)
• Your user name and password if needed.
• Server IP and the port number if the network uses a proxy server.
1. Tap Home Key > > Settings > Wireless & networks > Mobile networks > Access Point
Names.
2. Tap Menu Key > New APN.
3. Tap Name to enter you APN name (You can name it as you like).
4. Tap APN to enter the APN you want to add.
5. Tap Proxy and Port to enter the Server IP and port if the network uses a proxy server.
6. Tap and enter Username and Password (If there is no User name and Password, leave them blank).
7. Tap and enter APN type if needed.
8. Tap Menu Key > Save to complete.
Notes:
If you want to set the APN to default settings, tap Menu Key > Reset to default.
Wi-Fi
Wi-Fi provides wireless Internet access over distances of up to 300 feet (100 meters).