ZTE MF633T USB Modem Quick User Guide
Introduction The ZTE MF633T USB modem is a multi-mode 3G USB modem, working in HSPA/UMTS/EDGE/GPRS/GSM networks. With USB interface connecting to a laptop or a desktop PC, it integrates the functionality of a modem and a mobile phone (SMS), and combines mobile communication with Internet perfectly. It supports data and SMS services through the mobile phone network, enabling you to communicate anytime and anywhere. Specification The following table shows the specification of your device.
Dimension 85 mm×25 mm×9.6 mm Weight About 24g T-Flash capability Support up to 32GB MicroSD card Getting to know your device The following figure shows the appearance of the MF633. It is only for your reference. The actual product may be different. 1 3 4 2 1. USB Connector 2. Indicator 3. Back Cover 4. MicroSD card slot 5.
Hardware installation 1. Slide the back cover and remove it. 2. Insert the SIM/USIM card into the SIM/USIM card slot Insert the SIM/USIM card with the metal contact area facing downwards into the slot, shown as the following picture. 3. Insert the MicroSD card into the MicroSD card slot Note: This modem only supports MicroSD card. Insert your MicroSD card into the MicroSD slot, if you want to use it.
4. Close the back cover 5. Connect the Modem to your laptop or desktop PC Rotate the USB connector and plug the USB connector into your computer’s USB port. Make sure that it is tightly inserted. The OS automatically detects and recognizes new hardware and starts the installation wizard.
Software Installation On different operating systems, the installation procedures may be difference. Follow the system prompts during operation. z For Windows OS Your system will start the software setup process automatically when you connect the modem to your computer correctly. Follow the system prompts to complete the software installation. Note: If the system does not launch installation automatically, you can run the installation program in path of My Computer → ZoomTown Connect → Install.exe.
Safe Removal from your System Please close the application software, and then you can pull out the USB Modem safely. How to use your modem Various icons are presented to enable quick operation of the following functions: Click the “New” button, enter recipient’s SMS number and content, and then click “Send” to send new message. Phonebook Settings Data record Click “New” to fill in a new contact person and contact details. Set the configuration for the USB modem. Show the data record.
Safety Warning To the owner z Using electronic transmitting devices in aircraft, at petrol stations, and in hospitals is prohibited. Please observe and obey all warning signs and switch off your modem in these conditions. z Operating USB modem may interfere with medical devices like hearing aides and pacemakers. z Be aware of warning signs in places such as oil refineries or chemical factories where there are explosive gases or explosive products being processed.
Radio Frequency (RF) Energy z This model device meets the government’s requirements for exposure to radio waves. z This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government: z The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.
FCC Compliance z This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference. z This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.