ZTE WP623 GSM Wireless Phone User Manual 1
Copyright © 2008 by ZTE Corporation All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice. st Edition: 1 edition, Jan.
Contents 1 General Information..............................................................6 1.1 Welcome...................................................................................... 6 1.2 Security........................................................................................ 6 1.3 For Your Safety ........................................................................... 6 1.4 Cleaning and Maintenance.......................................................... 9 1.5 Limit Warranty .........
.1 New Message............................................................................ 22 4.2 Creating Message ..................................................................... 22 4.3 Inbox.......................................................................................... 23 4.4 Outbox ....................................................................................... 23 4.5 Preformatted Message .............................................................. 23 4.6 Message Settings ......
9.1 Multitap Input ............................................................................. 38 9.2 Numbers Input ........................................................................... 38 9.3 eZiText Input.............................................................................. 38 9.4 Symbols Input............................................................................ 38 10 Troubleshooting................................................................
1 General Information 1.1 Welcome Thank you for choosing ZTE WP623 GSM Wireless Phone (hereinafter referred to as "phone"). To guarantee your phone always works in its best condition, please read this manual carefully and keep it for future use. The pictures, symbols and contents in this manual are just for your reference. They might not be completely identical with your phone. Please subject to the material object.
explosive gases or explosive products being processed, because even if your phone is in idle state, it still transmits radio frequency (RF) energy. Therefore, power off your phone if required. Do not touch the antenna while calling. Otherwise it will affect the quality of calling and waste battery energy. The damaged antenna will cause slight burn while touching your skin. Keep phone out of the reach of small children. Phone may cause injury if used as a toy.
press CALL/REDIAL key to send. Do not attempt to disassemble the phone by yourself. Non-expert handling of the devices may damage them. Do not attempt to disassemble the mobile phone and battery by yourself. Changes and modifications made to the phone without the approval of manufacturer could void your authority to operate this phone. Battery Using The battery and the phone are separately deposited in the package and packed in well condition.
the plane taking off should get aircrew’s permission according to safety regulations. 1.4 Cleaning and Maintenance The phone is non-waterproof, please keep it dry and store in shady and cool place. If you want to clean your phone, please use clean fabric that is a bit wet or anti-static. Do not use harsh chemical cleaning solvents or strong detergents to clean your phone, such as alcohol, dilution agent and benzene. Power-off your phone before you clean it.
advised, knew or should have known the possibility of such damages.
2 Getting Started 2.1 Configuration Parts Quantity Phone set 1 Handset (Receiver) 1 Ni-MH battery 1 External power adapter 1 Antenna 1 Phone Receiver Cord 1 2.
z External Interface： (1) Antenna connector ANT (2) Data interface DATA (used for programming the phone; not used for GPRS) (3) External power socket (4) Battery switch BATT z Power Supply：100V－240V( AC) 50/60Hz Please refer to the real objects for other relative parameters about the battery and charger.
2.3 Key Instruction Key MENU/SELECT key CLR/BACK key MESSAGE key EXT PWR Indicator Up/Down key (Scrolling key) Left/Right key (Scrolling key) EXIT key Description Enter main Menu, select or confirm options in Menu and left bottom submenu on the display. In condition of character input, confirm the character chosen. Enter right bottom submenu on the display. Press CLR key to erase character while editing or dialing. Hold CLR key to erase all the characters.
Key CALL/REDIAL key HANDFREE key 0~9 Number key # key, * key Description Power on/power off. Exit from any window interface to standby mode Send telephone number or redial. In standby mode, press CALL/REDIAL key to enter to view all recent calls list. Hand free call. Use the number keys to enter numbers and characters. Make a direct phone and Speed Dial. Differs in different mode, option or function menu. Note： ◆ Keys in this manual may shape different from actual ones on your phone.
2.5.2 Antenna Install antenna to antenna connector ANT. Hold the plastic stick of the antenna and rotate the metal screw cap in clockwise direction to fix it up. Do not rotate antenna directly. 2.5.3 Adapter Connect the lead from the external power adapter to socket at rear back of phone set and connect adapter to an external AC socket. Good ground may guarantee phone’s reliable performance. 2.5.4 Power Supply There are two ways of power supply: 1. External power supply 2.
Enter Lock Code——Key in Phone Lock Code of the phone if it is set. Search——Search appropriate network connected. 2.6.2 Power-off In state of power-on, press and hold button key, LCD screen closes with a sound. Note: When abnormal power blackout causes abnormal phone restart, please disconnect and connect again external power adapter, and then switch on/off ZTE WP623. Please switch BATT at rear back of phone to “O” to power off battery supply, or remove battery if phone won’t be in use for a long time. 2.
are to avoid the illegal usage of SIM card and phone. To Enter PIN code of SIM card and Enter lock code to Unlock the phone, and then press MENU/SELECT key to confirm to start using the phone. If inputting wrong PIN three times continuously, SIM card will be locked by network. Note：The network provider offers you PIN code (four to eight digits). You should change PIN code as soon as possible for security. To set PIN code and Phone lock code, see “6.7 Security Settings”. 2.8.
3 Basic Operations 3.1 Making a Call In standby mode, signal strength icon is displayed on upper left corner of screen. And then, you can make or answer calls. 8:08 03/31/2006 Menu (Fri) Names 1. Power-on ZTE WP623. 2. To either make or answer a call, you can pick up the receiver or press HANDFREE key, or key in number directly and press CALL/REDIAL key to dial. 3. Make a call or answer a call as steps detailed in the following.
3.1.3 Dialing a Number in the List All calls you recently dialed, received or missed are saved in your phone. All numbers are grouped as Missed Calls, Incoming Calls and Outgoing Calls. When the list is full, the oldest numbers will be overwritten automatically when new record is coming. You can check the list as follows: In standby mode, press CALL/REDIAL key to enter all recent calls. Or press MENU/SELECT key→ Phone Menus→ Calls to view All Calls, Missed Calls, Received Calls or Dialled Calls.
last one dialed will not be saved. 3.2 Answering a Call When the phone rings, press CALL/REDIAL key directly, or pick up the receiver, or press HANDFREE key to answer. Usually, originating caller’s number displays in the screen. If the number is listed in the contacts already, the corresponding name will be shown. Hang on receiver to end call. Make sure to exit hand-free mode to guarantee next call to come in. Note: Originating caller’s information display needs network support.
3. Press MENU/SELECT key to confirm or CLR/BACK key to return to the previous menu level. Press key to exit to standby mode. Bottom menu function: If options are displayed on the bottom of the screen, press MENU/SELECT key and then Up/Down key to select. Press MENU/SELECT key or CLR/BACK key to set or exit. The functions of phone are mainly grouped in the main Menu: Short Messages, Phone Menus, Settings, Toolkit. Please refer to the text hereinafter in this manual in detail.
4 Messages This is an introduction to knowing how to send, receive, erase short messages in your phone. Press MENU/SELECT key→ Short Messages, or press MESSAGE key directly to enter Short Messages menu. Short Messages submenu: New Msg, Inbox, Outbox, and Msg Settings. Note：The function introduced hereinafter may differ with different service your area offers. Please consult with your service provider for more detailed information. 4.
Note：Short Message center in some cities and areas do not support short message exceeding 198 English characters. 4.3 Inbox Select Inbox and press MENU/SELECT key to Read short message received. Text Reply: Reply message to sender. Delete: Erase the message. Forward: Forward message to other recipients. Voice Reply: Call the sender directly. Extract No.: Extract and list all the number(s) in the message. Choose one to Save the number or Send Message to the number. 4.
Templates: Some built-in phrases and sentences in phone. Write, edit and send templates, see “4.5 Preformatted Message”. Msg Centre: Input Message Centre number (contact network service provider to get), press Save to finish setting. Msg Validity: Set validity period as 1 Hour, 2 Hours, 6 Hours, 1 Day, 2 Days, 1Week, 1 Month or 6 Months within which the message is repeatedly sent by short message center till it is sent successfully.
5 Phone Menus Phone Menus includes Calls, Diverts, Firewall, etc. 5.1 Viewing Calls Information of All Calls, Missed Calls, Received Calls and Dialled Calls including the name, phone number, conversation time and Call Duration are saved in Calls. 1. Select Menu→ Phone Menus→ Calls. 2. And then: Select All Calls to view all calls. Select Missed Calls to view all calls missed. Select Received Calls to view all calls received. Select Dialled Calls to view all calls dialed. 3.
5.3 Diverting Calls Use Diverts to forward an incoming call to a preset designated phone number. After setting of call forwarding, phone will automatically dial network to set the function in active. Note: This function needs network support. Please consult with network service provider to get corresponding service application. Setting Calls Divert You can set divert type under different circumstances. 1. Select Menu→ Phone Menus→ Diverts. 2. Set types of divert, press MENU/SELECT key.
in the list, “List Empty” will be displayed. 1. Key in phone number to Add New prefix directly, or select from Names. 2. Select Clear prefix list to delete all contacts in Friend List. 3. Or scroll to one contact listed and select Options: Add: Add another new contact prefix. Edit: Edit this contact prefix. Delete: Delete this contact prefix. Black List All the contacts will be list by the letter of the name. If there is no contact in the list, “List Empty” will be displayed. 1.
6 Settings Press and select MENU/SELCET key→ Settings to enter Settings menu. The phone has different functions in Settings to meet your requirement. They are: Phone Settings, Display Settings, Audio, Clock Settings, Call Settings, Network Settings, Security Settings, and Factory Settings. 6.1 Phone Settings 6.1.1 Language Set the displayed language as English available. 6.1.2 Own Number Save, edit and list the number information of your phone. 1. Select Menu→Settings→Phone Settings→Own Number. 2.
6.3 Audio Settings 1. Select Menu→Settings→Audio. 2. You can adjust the tone and volume in submenu in the following, and press MENU/SELECT key to confirm. Volume：Press Up/Down key or Left/Right key to adjust the volume. Ringing Volume: Set the volume of the ring tone. Speaker Volume: Set the volume of the speaker. Handfree Volume: Set the volume of hand-free. Tone or Alert: Ringing Tone: Select type of ring tone. Key Tone: Select “On” or “Off” to utter sound or not when press keys.
Note: This function needs network support. Please consult with network service provider to get corresponding service application. On：Register and activate Call Waiting function. Off：Cancel Call Waiting function. Status：Check whether Call Waiting is activated or not. Select “On” to activate the Call waiting function. The network will notify you of an incoming call while you have a call in progress.
Bar. 2. Set types of bar, press MENU/SELECT key. International Calls: Bar international call(s). All Except Home: Bar all calls except for home number. Incoming Calls: Bar incoming call(s). Incoming If Abroad: Bar incoming call(s) overseas. Outgoing Calls: Bar sending call(s). Cancel All: Cancel barring call(s) setting. 3.
7 Toolkit Select MENU→Toolkit to enter Toolkit menu. The phone offers Alarm Clock in Toolkit. 7.1 Set Alarm Set Alarm Clock at a certain time. 7.1.1 Normal Alarm Set alarm alert at a normal time. The phone clock only alarms once. 1. Select Menu→Toolkit →Set Alarm →Normal Alarm. 2. Press Left/Right key and Up/Down key to select Date and Time, and then press Number key to key in number. 3. Press MENU/SELECT key to confirm Date and Time, and then select the Alert Tone in list. 7.1.
8 Contacts in Names Press CLR/BACK key in standby mode or any submenu to enter Names. You can save, search, view and edit contacts information in Names. If there is no contact in the list, “List empty” will be displayed. All the contacts will be list by the letter of the name. 8.1 About Names All the contacts in Names are grouped in No Group, Family, Friend, Colleague, Schoolmate, Society, and VIP. 1. Press CLR/BACK key →Names. 2. Press * key to view contact and all Group list one by one.
8.3 Viewing all Names Information of all contacts including the name, phone number, group are displayed. 1. Press CLR/BACK key →Names. 2. Scroll Up/Down key to view contact and select one. Press CALL/REDIAL key to call out. 3. Or select one entry of the records and press Right key to view the information of the contact including the name, phone number, group. And then press Left/Right key to view different contact. 4. And press MENU/SELECT key to select Options. Send Message：Send message to this number..
8.5 Editing Names 1. Press CLR/BACK key →Names. 2. Press MENU/SELECT key to select Edit in Options. 3. Edit information of the contact selected including Number, Name, Group, etc. Press MENU/SELECT key to confirm, press # key to switch Text Input. 8.6 Deleting Names 1. Press CLR/BACK key →Names. 2. Press MENU/SELECT key to select Delete in Options. 3. Delete information of the contact selected. Press MENU/SELECT key to confirm. 8.7 Setting Names 1. Press CLR/BACK key →Names. 2.
Move SIM to mem.: Move all the contact information in SIM card to Phone’s memory. Delete All In SIM: Delete all of records in SIM card. Delete All In Phone: Delete all of records in Phone’s memory.
9 Text Input Your phone offers text input modes: Multitap Input (ABC/abc), Numbers Input (123), eZiText Input (Eng), and Symbol Input (Symbols). Input mode includes capital letter and lowercase mode. You can key in letters, digits, characters and symbols when writing text or editing contact record information in Names or Messages etc., following the common instruction in hereinafter table. Operation Input Letters Method Multitap Input—“ABC” or “abc”, press corresponding letter key till the letter appears.
9.1 Multitap Input Select Multitap Input (ABC/abc) — Each key stands for multiple letters. Press key till your letter appears. When the cursor moves, enter the next letter. “ABC” and “abc” stand for letters in capitalization and lowercase. 9.2 Numbers Input Select Numbers Input (123) — Press the corresponding key once to input the number. In Numbers input mode, you can not enter space. 9.3 eZiText Input Select eZiText Input (Eng) — Predictive word input is based on a built-in dictionary.
10 Troubleshooting If your phone appears following phenomenon in the process of application, please read following relative information at first. If the problems still can not be solved, please contact with the distributor or service provider. Problem Check Point When switching on the Please input your PIN Code which phone, it prompts “Enter offered with SIM card together. If you PIN”. have changed PIN code, please input new PIN Code. You can also set PIN code deactivated, see “6.
Problem message. Check Point or message centre setting, see “4.6 Message Settings”. Other phenomenon. abnormal Please first refer to user manual, then check whether the power is connected correctly or not, if there are no problems, please power off and re-start the phone again.
