ZTE X195 CDMA2000 1X Digital Mobile Phone User Manual
Copyright © 2007 by ZTE Corporation All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice. st Edition: 1 edition, Mar.
Declaration We, ZTE Corporation, declared that: The product is installed with battery separately in the box. The FCC ID label is placed on the mobile phone clearly visible to all persons at the time of purchase. The phone with internal antenna has been tested for compliance with FCC RF Exposure (SAR) limits and is complied with FCC RF exposure compliance requirements. The phone complies with part 15 of the FCC Rules.
Content 1 General Information............................................................. 9 1.1 Welcome....................................................................................... 9 1.2 Security......................................................................................... 9 1.3 Safety Warnings ............................................................. 10 1.4 Limit Warranty............................................................................. 14 1.
3.1 Making a Call .............................................................................. 26 3.2 Answering a Call ......................................................................... 27 3.2.1 Headset Ringing .................................................................. 28 3.2.2 Headset Autoanswer ............................................................ 28 3.2.3 Setting any Key Answer ....................................................... 28 3.2.4 Incoming Call Silence .................
4.9 Setting Speed Dial ...................................................................... 38 4.10 Viewing and Dialing Speed Dial................................................ 38 4.11 Memory Status .......................................................................... 39 4.12 Copying all Contacts“★” ...................................................... 40 5 Messages............................................................................ 41 5.1 Sending a New Message............................
Settings............................................................................... 52 7.1 Silence All ................................................................................... 52 7.2 Auto Key Guard .......................................................................... 52 7.3 Supp. Services............................................................................ 53 7.3.1 Call Waiting .......................................................................... 53 7.3.2 Call Forwarding ..
7.7 Call Timers.................................................................................. 60 7.8 Security Setting........................................................................... 61 7.8.1 Setting PIN Lock“★” ....................................................... 61 7.8.2 Modifying PIN Code ............................................................. 62 7.8.3 Erasing All Recent Calls....................................................... 62 7.8.4 Erasing all Contacts .....................
10.2 Numbers Input .......................................................................... 71 10.3 Predictive Input ......................................................................... 72 10.4 Symbols Input ........................................................................... 72 11 Troubleshooting ...............................................................
1 General Information 1.1 Welcome Thank you for choosing ZTE X195 CDMA 2000 1X Digital Mobile Phone. To guarantee the mobile phone always in its best condition, please read this manual carefully and keep it for future use. The pictures, symbols and contents in this manual are just for your reference. They might not be completely identical with your mobile phone. Please subject to the real object.
back of the mobile phone. You can see ESN number after removing the battery. Please keep ESN number for future use. “★”To prevent your mobile phone from illegal use, please take the security measures as follows: ¾ Set PIN code of the RUIM card. ¾ Take it with you as you can. 1.3 Safety Warnings To the owner Some electronic devices are susceptible to electromagnetic interference sent by mobile phone if inadequately shielded, such as electronic system of vehicles.
radio frequency (RF) energy. Therefore, power off your phone if required. Pay attention to traffic safety. Do not use your mobile phone while driving. Park before making or answering a call. Store the phone out of the reach of little children. The phone may cause injury if used as a toy. Mobile phone Please use original accessories or accessories that are authorized by the manufacturer.
Prevent liquid from leaking into your phone. Do not drop, knock or harshly treat your phone. Rough handling can break internal circuit boards. Do not connect the phone with other unauthorized peripheral equipments. Do not attempt to disassemble the mobile phone and battery by yourself. Non-expert handling of the devices may damage them. Do not charge the mobile phone without battery. On occasion of emergent calling, keep your phone in status of power on and in area of service.
Exposure to radio frequency energy Radio wave exposure and Specific Absorption Rate (SAR) information The handset is designed to comply with safely, requirements for exposure to radio waves. This requirement is based on scientific guidelines that include safety margins designed to assure the safety of all persons, regardless of age and health. The radio wave exposure guidelines employ a unit of measurement known as the Specific Absorption Rate, or SAR.
them into account in practical use. Safety airbag, brake, speed control system and oil eject system shouldn’t be affected by wireless transmitting. If you do meet problems above, please contact your automobile provider. Please power off your mobile phone when refueling your automobile, and so do the place where duplex wireless equipments are banned. Don’t put your phone together with flammable or explosive items; inner spark may cause fire. In Aircraft Follow the restrictions in aircraft.
(e) Power surges, lightning damage, fire, flood or other events outside ZTE’s reasonable control. (f) Use of the product with any unauthorized third party products such as generic chargers. (g) Any other cause beyond the range of normal usage for products. End User shall have no right to reject, return, or receive a refund for any product from ZTE under the above-mentioned situations.
2 Your Phone 2.1 Instruction of Keypad Earpiece Earphone LCD screen 4-way Scrolling key OK key/Menu key Call key Clear key End key 0~9 Number keys # key * key Microphone Icon Charger connector Key Description Make or answer a call. Press Call key in standby mode to Call key enter All Recent Calls list. Press Call key two times directly to redial the last number. End key End an active call or reject a call.
Power on/power off. Exit from any interface to standby mode. Erase character(s) while editing; Cancel operation, exit to previous Clear key pop-up window. In standby mode, hold Clear key to lock keypad. Enter main menu in standby mode, as OK/Menu key shown on the screen. Switch to options of submenu. Confirm the character chosen while character inputting. Scroll the cursor up and down.
for keying in commands and selecting (Scrolling options shown on the display. key) In standby mode, press Left key to enter MobileShop menu, press Right key to view All contacts. Used as direction key in games. ~ 0~9/number Key in numbers and characters. Make a Speed Dial call. key * Key，# Key Differs in different mode, option or function menu. Note: To “press” the key in this manual means to press the key and release it.
Power Indicator 2.3 Technical Parameter Handset ZTE X195 Type 44.7mm × 100.8mm × 13.7mm Dimension （Width × Height × Thickness） About 73g（Battery Included） Weight Lithium Battery Continuous About 80h～160h (Subject to Network) Standby Time Continuous About 2h～4h (Subject to Network) Talk Time Please refer to the real phone for other relative parameters of the battery and charger. 2.4 Battery The attached Li-ion battery along with the phone can be used after unpacking.
down to release and remove it off the phone. (2) Put finger on the top finger grip, and then lift up the battery from the finger grip to remove the battery. Installation：(1) Replace the battery into battery slot, to be noted that the bottom end should be firstly inserted. (2) Put the back-cover of the phone flatly upon the body of phone. Direct the back cover towards the locking catches on the both sides of the phone and push the back-cover of the phone upward to lock the cover into its place. 2.4.
Plug out rubber away (turn 180° as shown in the picture) from the jack on the bottom of handset and connect the lead from the charger to the socket on the bottom of the phone (Note: The side with arrow shall be upside while connecting). Connect the charger to an AC socket. Meanwhile, the charging indicator in the up-right corner of the display flops cyclically, indicating the charging is going. In power-off mode while charging, the display only shows the charging indicator.
the phone and AC socket. Note： When it is in charge, place the phone on condition of good ventilation and temperature between -5℃～＋45℃. Ensure to use the charger offered by the manufacturer. Using unauthorized charger may cause danger and violate the authorization of the phone and the guarantee article. When the phone is automatically switched off or indicates the alarm information of power shortage, please charge the battery in time.
missing and damaging information in the card and put RUIM card in place far away from electricity and magnetism. Warning：Please power off the phone before taking out RUIM card. It is prohibited to insert or taking out RUIM card in the condition of connecting with external power. 2.5.2 Insertion and Extraction of RUIM card“★” Power off the phone, remove the battery and other external power.
whether RUIM card inserted well or not. And then follow the prompt indication on the display. Enter PIN——Key in PIN code of RUIM card if it is set. Searching——Search appropriate network connected. 2.5.4 PIN Code“★” To set PIN code (personal identification number) is to avoid the illegal usage of RUIM card. To input PIN code of RUIM card and press OK key to confirm to start on using phone. If inputting wrong PIN three times continuously, RUIM card will be locked by network.
Besides sending and receiving calls, you can also do: Press OK key to enter main Menu. Hold Up key to set the phone in Silence All. Press Down key to enter Messages menu. Press Left key to enter MobileShop menu. Press Right key to view All Contacts. Press Call key to enter All Recent Calls. Hold Clear key to lock phone’s keypad.
3 Basic Operation 3.1 Making a Call Please ensure that you are in the place where the signal can be received. Examine signal strength icon on the screen. The more the indication bars, the stronger the intensity of receiving signal is. If there is no bar, please move to the place where the intensity of receiving signal is better. Sometimes, you only need to change the direction.
Enter the country code, area code (without the leading “0”) and the complete telephone number you want to dial, press Call key to call out. Before the country code, hold a certain number key, e.g. “0” key to enter the international prefix “+” (the character “+” replaces the international access code) or key in international prefix e.g. “00” of international call directly.
With the number already saved in Contacts, the phone also shows the name of caller meanwhile. • Press to answer an incoming call. • Press to end a call and the call duration is temporarily displayed. See “7.9 Accessories” or refer to other ways of answering calls for your option as follows. 3.2.1 Headset Ringing • Select Menu→ Settings→ Accessories→ Headset Ringing • Select On/Off, and press OK key. 3.2.2 Headset Autoanswer You can set headset to answer an incoming call automatically.
3.2.4 Incoming Call Silence • When a call is coming, press OK key to select Silence to mute the ringer tone. • This function silences the current incoming call only. The phone will ring normally as next call coming. 3.3 In Conversation 3.3.1 Silence in Conversation During conversation, you can press Right key and OK key to select Mute to let the other party temporarily not hear your voice; Re-press Right key and OK key to select Unmute back to normal. 3.3.
3.4 Viewing Missed Calls For missed calls, with the function of alert setting, phone screen indicates “Missed×Calls” ( “×”shows the number of missed calls). • Press OK key to select OK to clear screen, and then return to the standby mode. • Press Right key→ OK key to select Calls to enter the list of missed calls. 3.5 Menu Functions Main Menu Function: 1. In standby mode, press OK key to enter main menu. 2.
The functions of phone are mainly grouped in main Menu: Contacts, Messages, Recent Calls, Settings, Extra, and VAS. Please refer to the text hereinafter in this manual in detail.
4 Contacts 4.1 Finding Records You can search for a name or number in Contacts in pop-up window by choosing: In All Contacts 1. Select Menu → Contacts. 2. Select View All. You can key in the first characters of the name you are searching for to view contact directly in All Contacts. 3. Press Up/Down key to scroll through the corresponding name(s) and records in the list. Scroll to the name you want, and press OK key to view the details. Find 1. Select Menu → Contacts. 2. Select Find.
searching for. You can also switch between Find, Cancel by pressing OK key and Right /Left key. And then press OK key to find. See “10. Text Input” more instructions for writing text and character. 3. Press Up/Down key to scroll through the corresponding name(s) and records in the list. Scroll to the name you want, and press OK key to view the details.
and Web Page. 3. Press OK key twice to select Next, then Enter name of the contact. See “10. Text Input” more instructions for writing text and character. 4. After the completion of writing, select Next. 5. Scroll to the just-added phone number to reedit，press OK key. Further operation can be executed, such as: Edit：Edit the number. Erase: Delete the number. Send SMS Message: Send message to this number. Number Type: Set number’s type. Save to R-UIM“★”: Save in RUIM card.
Edit：Edit the Email, Address or Web Page. Erase：Erase the Email, Address or Web Page. Add to RUIM Card“★”: 1. Select Menu→ Contacts→ Add to RUIM. 2. Key in Phone Numbers, and press OK key twice to select Next, then Enter name of the contact. See “10. Text Input” more instructions for writing text and character. 3. After the completion of writing, select Next. 4. Scroll to the just-added phone number to reedit，press OK key.
－View All：All records in phone and RUIM card“★”. －R-UIM“★”： All records in RUIM Card. －Personal： All records in personal group. －Business： All records in business group. Note: When there is no storage record in Contacts, it will indicate “No contacts found”. 4.4 Erasing Records 4.4.1 Erasing a Record 1. Select Menu → Contacts. 2. Select View All or Find to search for would-be erased record. 3. Scroll to the record you want to erase and press OK key. 4. Select Options to Erase Contact, and press OK key.
4. Select Options to Edit Name, and press OK key. 5. Press Clear key to erase character of the current name, and rewrite the name. 6. Select Save. “Contact Saved” appears on the display. 4.6 Editing Phone Number 1. Select Menu→ Contacts. 2. Select View All or Find to search for would-be edited record. 3. Scroll to the number you want to edit and press OK key. 4. Select Edit in Options to edit number, and press OK key. 5. Press Clear key and press number key to erase and key in digit of phone number. 6.
4.8 Setting Number Type 1. Select Menu→ Contacts. 2. Select View All or Find to search for would-be edited record in phone’s memory and press OK key. 3. Select number, press OK key, and select Number Type. 4. Select the type of number: Work, Home, Mobile, Pager or Other and press OK key. 4.9 Setting Speed Dial In standby state, you can make a Speed Dial of stored number by keying in one or two-digit digit (2-99). 1. Select Menu→ Contacts. 2.
can press Call key to dial. You can also make a call by entering speed dial number in the standby mode. Method 1: Enter speed dial number, press Call key to dial. Method 2: Directly hold the Speed Dial Number digit key. If the Speed Dial Number is one-digit, directly hold the digit key. If the Speed Dial Number is two-digit, press first digit key and then hold the second one. For example: If the Speed Dial Number is 25, you should press 2 key firstly, and then hold 5 key, thus it can dial directly.
4.12 Copying all Contacts“★” Phone To UIM: Copy all contacts of the phone’s memory to RUIM card Note: This function can copy all the contract records to RUIM card, and all the different records or numbers under the same name will be copied accordingly to RUIM card one by one as different records. UIM To Phone: Copy all contacts in RUIM card to the phone’ memory.
5 Messages This is introduction of knowing how to send, receive and erase the messages in your phone. Note：The function introduced hereinafter may differ with different service offered in your area. Please consult with your service provider for more detailed information. 5.1 Sending a New Message Please consult with the service provider to support the network service of sending message. You can only send message to the mobile phone which can receive message. 1. Select Menu→ Messages→ Create Message. 2.
input, press OK key, and Left/ Right key to scroll to Contacts), and then press OK key to select the phone number you want to send message to and press OK key. 3. Select Continue to Write message text. See “10. Text Input” more instructions for writing text and character. 4. When you finish writing message, pressing OK key to select message Priority: Normal, Interactive, Urgent, Emergency. The default priority is Normal. 5.
OK key and select all the phone numbers you want to send message to, and press OK key. 3. All the phone numbers displayed in List OK in pop-up window can be reedited. The maximum of receivers not exceed 10 persons. 4. When you finish editing and writing, select Continue, and press OK key to Send to all the recipients. 5.3 Receiving Incoming Call while Editing Message • If you do not want to receive the incoming call, press End key. • If you want to receive the incoming call, press Call key.
3. Press OK key to read message. Display automatically scrolls page by page. You can also press Up/Down key to scroll. 4. After reading, press Left/Right key to select: －Next： View the next message. －Erase：Erase this message. －Forward： Forward the message to other recipients. －Reply： Reply message to sender. －Sender：Call back or reply message to sender or save sender’s number, and then select options as follows. Call: Call back. Reply: Reply message t o sender.
memory. You can select erasing messages when sending or reading messages; erase messages one by one or all in InBox, OutBox and RUIM card“★”. 5.6.1 Erasing a Message 1. Select Menu→ Messages. 2. Select messages location: InBox, OutBox or R-UIM“★”. 3. Press Up/down key to select to-be-erased messages. 4. Select Erase to erase messages. “Erase this message?” appears. 5. Select Yes to erase this message. 5.6.2 Erasing all Messages 1. Select Menu→ Messages→ Erase Messages. 2.
- Old Inbox： Erase all the read messages in Inbox. If deletion is selected, the prompt of “Erase all old Inbox messages?” appears. Select Yes to erase. Select No to return to previous pop-up window. - Erase All：Erase all messages in phone and RUIM card“★”. The prompt of “Erase all messages?” appears. Select Yes to erase. Select No to return to previous pop-up window. 5.7 R-UIM“★” The phone can move messages received to RUIM card, see “5.4 Reading Message”. Viewing message in RUIM card: 1.
To RUIM“★”: Save message in RUIM Card. －Move to Inbox：Move message to InBox. －Forward： Forward the message to other recipients. 5.8 Sending Preformatted Message The phone has a group of some common built-in phrases and sentences, such as, “Call me”, “Can I call you?” etc. 1. Select Menu→ Messages→ Preformatted Msg. 2. Scroll to the message you want to send. 3. Press OK key to key in phone number or select in Contacts. 4. Press Ok key to edit, save and send message, see “5.
5.10 Message Settings 5.10.1 Changing Voice Mail Box Number 1. Select Menu→ Messages→ Messages Settings→ Voice Mail Number. 2. If the voice mail box has not been set, press OK key to select Yes. And then add directly. 3. If the number has been set, select Edit to edit and press OK key. 4. After inputting voice mail number, press OK key twice to confirm. Note：Please consult with your network operator for the number of voice mail box. 5.10.
3. Press OK key. Note：If the setting of Silence All option in Settings is Vibra Only, Lights Only, it follows the setting of silence option of Settings. 5.10.3 Automatically Erasing InBox Set erasing the last read message in Inbox automatically when Inbox is full. 1. Select Menu→ Messages→ Message Settings→ Auto Erase Inbox. 2. Select Enable or Disable and press OK key.
6 Recent Calls 6.1 Viewing Recent Calls Information of Missed Calls, Incoming Calls, Outgoing Calls, All Recent Calls including the name, phone number, conversation time and duration is stored in the Recent Calls. 1. Select Menu→ Recent Calls. 2. Select Missed Calls, Incoming Calls, Outgoing Calls or All Recent Calls. 3. Press OK key. 4. Select one entry of the records and press OK key. 5. Select option: - Call Information：Indicate number and conversation duration.
- Save To Existing：Add this number to the existed record in the Contacts. - Save to RUIM“★”： Save this number to RUIM Card. Note“★”: If the RUIM Card does not support the function of Incoming Call Indication, you can only see part of the above-mentioned options. 6.2 Erasing Recent Calls List You can erase all the Recent Calls in the menu of Recent Calls. 1. Select Menu→ Settings→ Security. 2. Input PIN Code and press OK key. 3.
7 Settings In main Menu pop-up window, select Settings to enter into. Your phone has different functions in Settings to meet your requirement. They are: Silence All, Auto Key Guard, Supp.Services, Sound, Display, Alert, Call Timers, Security and Accessories. 7.1 Silence All Select Menu→ Settings→ Silence All to set the alert type of phone. There are three options: －Normal：Normal ringer and message alert type, no special setting. －Vibra Only：No ringer. Only vibrating and back lighting.
2. Select an option in pop-up window: －Off：Deactivate the function of phones’ key lock. －30 seconds：Phones’ key locked automatically 30 seconds after the last key pressing. －2 minutes：Phones’ key locked automatically 2 minutes after the last key pressing. －5 minutes：Phones’ key locked automatically 5 minutes after the last key pressing. 3. Press OK key to confirm. Note： - Hold Clear key to lock the keypad directly in standby mode.
Call Waiting lets you enjoy three-party conversation without missing call. 1. Select Menu→ Settings→ Supp.Services→ Call Waiting. 2. Select Activate to activate the Call Waiting function. The network will notify you of an incoming call while you have a call in progress. You can press Call key to get through the waiting call and switch one call to another. 3. Select Deactivate to cancel the Call Waiting function. 4. Select Cancel to exit to the previous pop-up window. 7.3.
which the phone will forward. E.g. To forward incoming call to 12345678, input: 12345678, press OK key twice and confirm. Continue to press OK key to Activate. If the number has been set, directly press OK key to select Activate. 4. Select Deactivate to disable Call Forwarding function. 5. Select Cancel to exit to previous pop-up window. 7.4 Sound 7.4.1 Volume You can adjust the volume of Ringer, earpiece and key beep. 1. Select Menu→ Settings→ Sound→ Volume. 2.
－Vibration： Set mobile phone in vibration case to prompt incoming call. －Vibra + Ringer：Set mobile phone in ten-second vibration case, then continuous Ringer later to prompt incoming call. Note：If Silence All option of Settings is set in Vibra Only or Lights Only, phone follows the silence option of Settings. 7.4.3 Ringer of Incoming Call ZTE X195 offers various Ringers of incoming call for your selection. 1. Select Menu→ Settings→ Sound→ Ringer Type. 2.
－Long：Utter DTMF tone even longer. 7.4.6 SMS Ringer You have a choice of various ringing tones for message in phone. 1. Select Menu→ Settings→ Sound→ SMSRinger Type. 2. Press Up/Down key to scroll to select and press OK key. 7.4.7 ClockRinger Type You have a choice of various ringing tones for alarm in phone. 1. Select Menu → Settings→ Sound→ ClockRinger Type. 2. Press Up/Down key to scroll to select and press OK key. 7.5 Display 7.5.
7.5.3 Adjusting Brightness 1. Select Menu→ Settings → Display→ Brightness. 2. Press Up/Down key or Left/Right key to adjust brightness, and press OK key. 7.5.4 Selecting Time Format 1. Select Menu→ Settings→ Display→ Time Format. 2. Select AM/PM or 24 HR, and press OK key. 7.5.5 Changing Banner View and edit phone’s greeting to which appears on the display to your own. 1. Select Menu→ Settings→ Display→ Banner. 2. Press OK key to Edit. 3. Press Clear key to erase character(s) and key in character(s). 4.
1. Select Menu→ Settings→ Display →Backlighting. 2. Select an option in pop-up window: －10s：After the last pressing keys, the backlight keeps on for 10 seconds. －30s：After the last pressing keys, the backlight keeps on for 30 seconds. －10s and in call: After the last pressing keys, the backlight keeps on for 10 seconds. And keeps lighting during a call. －30s and in call: After the last pressing keys, the backlight keeps on for 30 seconds. And keeps lighting during a call. 3. Press OK key to confirm.
－5 minutes：Screensaver automatically activates 5 minutes after last keys pressing. 3. Press OK key to confirm 7.6 Alert You can select Enable or Disable the alert. 1. Select Menu→ Settings→ Alert. 2. Select an option on display and press OK key. －Missed Call： When there are missed calls, alerts. －Roaming： When roam in active and handoff between service areas or states occurs, alerts. －Service：When enter or leave area with service available, alerts.
timer can be reset. －All Calls：Indicate call time of all dialed and answered call. The timer can be reset. 3. Select Reset to clear data, the timer is set to zero. 7.8 Security Setting Introduction to phone’s security options preventing others or avoiding illegal use or acquire your phone’s personal information. Please input right PIN code to enter. Note: Please input right phone PIN code to enter security setting. The default PIN code is 1234. Please change it to your own password as soon as possible.
Otherwise, phone gives emergency call. 7.8.2 Modifying PIN Code 1. Select Menu→ Settings→ Security. 2. Input your phone PIN code, and press OK key. 3. Scroll to PIN Change, input New PIN and press OK Key. “PIN Changed” appears showing confirmation. 7.8.3 Erasing All Recent Calls You can erase all Recent Calls. 1. Select Menu→ Settings→ Security. 2. Input your PIN Code, press OK key. 3. Scroll to “Erase All Recent Calls List?”, press OK key. 4.
7.8.5 Restoring Factory Default Your phone offers factory default phone setting. You may modify some options when you use phone. You can also Restore Factory Default to renew some modified options to the origin. 1. Select Menu→ Settings→ Security. 2. Input your PIN Code, press OK key. 3. Select Phone Reset. 4. For “Restore Factory Default”, select Yes to revert to factory default setting. Note： Restoring the phone do not influence your PIN code, Recent Calls, Contacts, InBox and OutBox. Some settings, e.g.
Autoanswer. 2. Select Off to end automatic answering or select 2 seconds, 5 seconds or 10 seconds to give automatic answering seconds later accordingly. 3. Press OK key. 7.9.3 Any Key Answer 1. Select Menu→ Settings→ Accessories→ Any Key Answer. 2. Select On or Off, press OK key to set or not. For an incoming call, press any key to answer, except for End key.
8 Extra Extra offers two games: Smart Blocks and Push Box, as well as tools, such as, Stopwatch, Alarm, Calendar and Calculator. . 8.1 Games 8.1.1 Smart Blocks In this game, adjusting blocks’ directions and downfall places to let them form in order in process of downfall. As blocks fully formed in line(s), line(s) disappear and reward mark. As while as blocks pileup to the top line, the game is over. 1. Select Menu→ Extra→ Games→ Smart Blocks. 2. Press OK key, the display shows greeting and play guide. 3.
8.1.2 Push Box In this game, pushing boxes with skill and locating them to stated locations. And then enter next stage. 1. Select Menu→ Extra→ Games→ Push Box. 2. Press OK key, the display shows greeting and play guide. 3.Select New Game to start，select Stage and key in stage level. Press OK key to start. 4. As passing a stage, select Replay to replay again, select Next Stage to enter next stage. 8.2 Stopwatch 1. Select Menu→ Extra→ Stopwatch. 2. Select Start to make stopwatch timing. 3.
key. 4. Select Once, Daily or Weekdays alarm. Press OK key. 5. When alarm rings, select OFF to stop alarming or select Snooze to postpone alarming time. Alarm rings again 10 minutes later. 8.4 Calendar 1. Select Menu→ Extra→ Calendar. 2. Press Left/Right key or Up/Down key to select exact date you want to view in pop-up calendar window. Press OK key. 3. Scroll Left/Right key to select: Query: Press OK key to view date info in detail.
8.5 Calculator Use calculator to execute basic maths calculation. 1. Select Menu→ Extra→ Calculator. 2. Key in digits. And press Left/Right key to scroll to the symbol you want, press OK key. ÷ Division Sign - Subtraction Sign = Equal Sign + Plus Sign x Multiply Sign . Decimal point C Clear all input digits and reset to Zero ± Change digit to positive number or negative Press Clear key to erase digit one by one and exit to previous window, press End key to exit to standby mode.
9 VAS This function needs network support by service provider. If your phone (or RUIM card“★”) can also support, menu of VAS appears on the display. If your phone (or RUIM card“★”) and network provider don’t support, the function is invalid. The application of this function may ask for extra fee. Please contact with network provider to acquire more information.
10 Text Input Your phone offers text input modes: Multitap Input (Traditional, abc), Numbers Input (123), Predictive Input (eng), and Symbol Input. Input mode includes capital letter and lowercase mode. You can key in letters, digits, characters and symbols while writing text or editing record information in Contacts or Messages etc., following the common instruction in hereinafter table.
Erase Character Erase all . Press Clear key the characters till all the Hold Clear key characters be erased. Move cursor left or right . Press Left /Right key Change Input Mode Press # key to select input mode and change character case. Capitalization Hold * key to switch between capitalization and lowercase, except for being in Numbers & Symbols mode. 10.1 Traditional Input Select Multitap (Traditional) Input —Text indicator as “abc”. Each key stands for multiple letters.
10.3 Predictive Input Select Predictive Input — Text indicator as “eng”. The predictive text input is based on a built-in dictionary by which you can input word(s) preformatted. One letter asks for pressing only once. Press the digit key corresponding to the letters once till the word appears on the screen. If the word displayed is not the word you want, press Up/Down key to look for another matching word. Then press OK key to confirm. 10.
11 Troubleshooting If your phone appears following phenomenon in the process of application, please read following relative information at first. If the problems still can not be solved, please contact with the distributor or service provider. Problem “★”When the Check Point switching phone, it on Please input PIN Code which offered prompts with RUIM card together. If you have “Enter PIN”. changed PIN code, please input new PIN code. You can also set PIN code deactivated, see “7.
time. (Silence, Alert Type and ringer Volume in Settings). Messages cannot be sent. Please check the signal of network.
