ZXDSL 931WIIB User Manual Document version: 2011-06-30 R1.1 Copyright 2011 ZTE Corporation All rights reserved. No part of this documentation may be excerpted, reproduced, translated, annotated or duplicated, in any form or by any means without the prior written permission of ZTE Corporation. ZTE CORPORATION reserves the right to modify this manual for product upgrade or other causes without notifying users in advance.
Limited Warranty ZTE warrants that, for one year from the date of delivery by ZTE to purchaser's designated carrier, the equipment will remain free from defects in design, material and workmanship under normal use and service and will conform in all material respects to the applicable specifications set forth in purchase order or agreement. ZTE does not warrant that operation of the equipment will be error-free or uninterrupted.
ZXDSL 931WIIB User Manual by individuals who are not ZTE-certified, the Warranty shall be void as to all Equipment serviced in breach of this agreement. End User shall have no right to reject, return, or receive a refund for any Equipment from ZTE. Any item repaired or replaced by ZTE shall continue to be warranted for the longer of the remainder of the original warranty period or 90 days from the date the repaired or replaced part is delivered to the carrier.
ZXDSL 931WIIB User Manual WHETHER ARISING OUT OF BREACH OF CONTRACT (INCLUDING BUT NOT LIMITED TO BREACH OF WARRANTY) OR TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE AND STRICT LIABILITY) OR UNDER AN INDEMNIFICATION PROVISION SHALL IN NO EVENT EXCEED THE AGGREGATE AMOUNT BENIFITED BY ZTE IN THE PRODUCTS FROM WHICH SUCH LOSS OR DAMAGE DIRECTLY AROSE.
Contents Chapter 1 Safety Guidance............................................................1 1.1 Safety Check......................................................................................... 1 1.2 Safety Cautions..................................................................................... 1 Chapter 2 Overview .......................................................................3 2.1 Features................................................................................................
Chapter 1 Safety Guidance 1.1 Safety Check Before installing the VDSL2 equipment, check all the below listed items: 1 Electric safety z Ensure no inflammable, conductive or moist objects and no ageing-cables around the equipment. Place all electrical appliances safely. 2 Equipment position z Install the equipment in a ventilated environment avoid of any electric devices nearby. z Place the equipment on a stable and flat surface. z The equipment must be protected from sunshine.
ZXDSL 931WIIB User Manual z Connect the phone with the VDSL2 line directly, and lead the line out from the phone interface of the splitter. z Do not place any object on the equipment. z The equipment must be kept dry and clean. Ensure the equipment environment has ventilation and rainproof capability. z To protect the equipment against lightning and thunderstorm, please remove the power plug and all connection cables. z Use a soft and dry cloth to clean the equipment.
Chapter 2 Overview The ZXDSL 931WIIB is a VDSL2 access device, which supports multiple line transmission mode. It provides four 10/100Base-T Ethernet interfaces and wireless user access function according to the IEEE802.11b/g/n standard. In addition, ZXDSL 931WIIB provides the broadband Internet service or enterprise network access service through the high-speed DSL or Gigabit Ethernet uplink access mode. 2.1 Features The ZXDSL 931WIIB is a VDSL2 MODEM.
ZXDSL 931WIIB User Manual z It supports USB 2.0 host z It supports DSL Gigabit Ethernet uplink access mode. 2.2 Product Specifications and Requirements z Environmental requirements Environmental temperature: 0°C - 40°C (32°F - 104°F) Humidity: 20% - 90% (non-condensation) z Power specification Power adapter: Input: AC 100 V – 240 V, 50Hz/60Hz Output: DC 12 V, 2 A z Consumption: < 18 W z Certification FCC UL WiFi 2.
ZXDSL 931WIIB User Manual z Quality Certificate 1 Note: This information is only for reference. Please refer to the actual product package. Note: Please use the power adapter that is provided in the ZXDSL 931WIIB package.
Chapter 3 Installation Preparation 3.1 Hardware Description Front panel Figure 3.1-1 ZXDSL 931WIIB Front Panel Table 3.
ZXDSL 931WIIB User Manual Ethernet interface is receiving or sending data OFF No detected radio signal WLAN port is receiving or sending Flash data ON WLAN interface is ready to work OFF WPS function is OFF WPS function is in negotiation Flash status ON WPS function is ON Power is off or the modem is not OFF connected to any USB device. The modem is connected to a USB ON device. Flash Data is transmitted on the USB port. Flash WLAN Green WPS Green USB Green Rear panel Figure 3.
ZXDSL 931WIIB User Manual Side panel Figure 3.1-3 ZXDSL 931WIIB Slide Panel Table 3.1-3 Slide Panel LEDs Interface ON/OFF WPS Reset WLAN USB Function Power switch, to power on or power off the device. WLAN Protected Setup When the power is on, press the button for more than five seconds to restore the factory default settings, and then the system restarts automatically. WLAN switch, to enable or disable the WLAN function. USB interface, connects to a USB device. 3.
ZXDSL 931WIIB User Manual RJ-11 RJ45 RJ45 Power Adapter Splitter Modem ONU Line Phone VDSL Service Socket Power Socket Figure 3.2-1 ZXDSL 931WIIB Connection Schematic Diagram (No Phone sets are Installed Before the Splitter) Connection 2 Figure 3.2-2 shows the connection of the installed splitter with the ZXDSL 931WIIB.
ZXDSL 931WIIB User Manual Figure 3.2-2 ZXDSL 931WIIB Connection Schematic Diagram (Phone sets are Installed before the Splitter) Note: If the first connection is not applicable, please adopt the second connection method. In the second method, install a MicroFilter on the telephone cable (as illustrated in Figure 3.3-2, do not use a splitter to replace the MicroFilter). Install the telephone directly before the splitter installation.
ZXDSL 931WIIB User Manual z The installation process is as follows: Connect the Line interface of the ZXDSL 931WIIB to the splitter MODEM interface by using the RJ-11 telephone cable. Connect the phone set lines to the splitter PHONE interface. Connect the user telephone cable port to the splitter LINE interface. 4 Connect the power Connect one power adapter terminal to the power interface of the ZXDSL 931WIIB, and the other terminal to the socket on the wall.
Appendix A FAQs No. Problem and Troubleshooting All indicators are OFF when the ZXDSL 931WIIB equipment is powered 1 ON. First make sure that you have inserted the power adapter of the ZXDSL 931WIIB into a working power socket and that the ZXDSL 931WIIB has been powered ON (the switch button is pressed down). If the indicators are still OFF after confirmation of the above items, may be the hardware is damaged. You may contact local operators for maintenance. Never dismantle the equipment by yourself.
ZXDSL 931WIIB User Manual No. Problem and Troubleshooting It is recommended to connect the VDSL2 splitter to the telephone cable first and then connect the phone sets to the splitter interfaces. Installing a telephone directly before the splitter will lead to connection failure between the ZXDSL 931WIIB and the device at central office side, or an Internet access failure, or a slow connection speed.
ZXDSL 931WIIB User Manual No. Problem and Troubleshooting If the VDSL2 suddenly fails to be synchronized (link down) during application, usually the Link indicator on the MODEM will not be ON. It is suggested to check the following steps one by one: 1. First check the quality of incoming cables and incoming cable connectors. 2. Install the VDSL2 MODEM correctly based on the user guidance. Minimize the number of taps. 3.
ZXDSL 931WIIB User Manual Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for uncontrolled environment .This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
ZXDSL 931WIIB User Manual Customer Information 1. This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On bottom of this equipment is a label that contains, among other information, a product identifier of US: ZTEDL03BDSL931WB. If requested, this number must be provided to the telephone company. 2.
ZXDSL 931WIIB User Manual 6. Connection to party line service is subject to state tariffs. Contact the state public utility commission public service commission or corporation commission for information. 7. If the telephone company requests information on what equipment is connected to their lines, inform them of: a) The telephone number that this unit is connected to, b) The ringer equivalence number [0.
ZTE Corporation Warranty Card Dear customer, Thank you for choosing the ZTE communication product. To obtain our best service, please read the information in this warranty card carefully and keep this card properly. ZTE Corporation warrants that the product will be free of manufacturing defects for a period of one year from the date of purchase.
Dealer Model Number Dealer Phone Serial Number Service and Maintenance Record Date Maintenance/service Item Signature of Maintenance Engineer Signature of Customer
ZTE Corporation
