ZXHN H196A WiFi Router User Manual
ZXHN H196A WiFi Router User Manual Manual No: SJ-20190711154832-005 Edition Time: 2020-09-25 (R1.0) LEGAL INFORMATION Copyright © 2020 ZTE CORPORATION. The contents of this document are protected by copyright laws and international treaties. Any reproduction or distribution of this document or any portion of this document, in any form by any means, without the prior written consent of ZTE CORPORATION is prohibited.
1 Safety Precautions Note: Before using the device, read the following safety precautions. ZTE bears no liability to the consequences incurred by violation of the safety instructions. Usage Cautions � Read all the safety cautions carefully before using the device. � Only use the accessories included in the package, such as power supply adapter and battery. � Do not extend the power cord, otherwise the device will not work.
Cleaning Requirements � Before cleaning, power off the device, and unplug all the cables connected to the device, such as power cable, optical fiber, and Ethernet cable. � Do not use any liquid or spray to clean the device. Use a soft dry cloth. Environment Protection � Do not dispose the device or battery improperly. � Observe the local regulations about the equipment disposal or treatment.
� Gigabit Ethernet WAN Uplink The ZXHN H196A can provide Internet access through Gigabit Ethernet WAN connection. So it is possible for ZXHN H196A to provide Internet access choices to suit various broadband access network. � GE LAN Ports The ZXHN H196A is equipped with 2 Gigabit Ethernet LAN interfaces which provides higher bandwidth and speed for networking and makes the device more future-proof. � Dual Band Concurrent Wi-Fi The ZXHN H196A supports Dual-Band concurrent Wi-Fi up to 300Mbps(802.
Operation temperature 0 °C – 40 °C (32 °F – 104 °F) Operation humidity 5% – 95% (non-condensing) 2.2 Package Check After unpacking the ZXHN H196A product, check that the following items are complete. Name Quantity ZXHN H196A 1 Power adapter 1 RJ-45 Ethernet cable 1 User manual 1 Note: The list is only for reference. The actual contents may vary from the list. If any item is found to be wrong, missing, or damaged, contact your service provider.
Figure 3-1 The Front Panel Indicator Color Red Green Status Definition Solid The device is being started or the device is abnormal. Flashing The uplink connection is failured, or failure to configure synchronization in the Extender mode. Solid The uplink connection is normal. Flashing The WPS negotiation connection is being implemented.
Rear panel Figure 3-2 shows the interfaces and buttons on the rear panel of the ZXHN H196A. Figure 3-2 The Rear Panel Interface/Button Function POWER Power supply port, it is connected to the power adapter. WAN RJ-45 port, it is used to to connect to the uplink access network. LAN1/LAN2 RJ-45 port, it is used to connect the modem to computer , STB or other network devices.
3.2 Hardware Connection Figure 3-3 shows the devices that are connected to interfaces of the ZXHN H196A. Figure 3-3 Cable Connection The factors affecting the wireless network coverage range include the location of the product, distance between the product and a wireless terminal, number of obstacles, obstacle material and density, and interference source. It is recommended that you place the product in accordance with the following principles to maximize the strength of wireless signals.
4 Troubleshooting The green indicator on the front panel is off after the device is powered on. � The wireless network is not enabled and checking the configuration of wireless network . � The indicator function is disabled. � The uplink signal is weak in the Extender mode and checking the uplink connection. The red indicator on the front panel is flashing after the device is powered on. � The WAN link is not established. � The Ethernet cable is not correctly connected to the WAN interface.
user is encouraged to try to correct the interference by one or more of the following measures: � Reorient or relocate the receiving antenna. � Increase the separation between the equipment and receiver. � Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. � Consult the dealer or an experienced radio/TV technician for help.
