ZXHN H168M User Manual Version 1.0 ZTE CORPORATION NO. 55, Hi-tech Road South, ShenZhen, P.R.China Postcode: 518057 Tel: (86) 755 26771900 Fax: (86) 755 26770801 URL: http://ensupport.zte.com.cn E-mail: support@zte.com.
LEGAL INFORMATION Copyright © 2011 ZTE CORPORATION. The contents of this document are protected by copyright laws and international treaties. Any reproduction or distribution of this document or any portion of this document, in any form by any means, without the prior written consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by contractual confidentiality obligations.
1 Safety Precautions Installation � Please use the power adapter supplied. Other power adapters may damage the device or cause device exception. � Pay attention to the capacity of the power socket or power cable. Overloaded power socket or damaged power cable and socket can cause shock or fire. Check the corresponding power cable regularly and replace it should there be any damage on it. � Do not disassemble the device.
Safety Sign Meaning Indicates major accident of possible equipment damage or bodily Danger injury should the safety caution be ignored. Warning injury should the safety caution be ignored. Indicates minor accident of possible equipment damage or bodily Indicates possible equipment damage, data loss, equipment Caution Tip Note performance deterioration and other unexpected results should the safety caution be ignored. Indicates special tip. Indicates additional information to the text.
2 Overview Product Introduction ZXHN H168M is an xDSL BONDING uplink wireless user terminal that is oriented to home and SOHO users and provides AP and LAN Switch. Home and SOHO networks can be set up with H168M being the center to provide users with shared Internet connections to multiple network devices to provide safe wired or wireless communication, IPTV access and abundant multimedia services.
Please contact the vendor immediately should there be any incorrect, missing or damaged components. Try to keep the package and existing components of the product in the case that the product needs to be replaced. Product Features Technical Features � Support for 4 x 10/100 Mbps Ethernet ports. � Support for GUI (graphic user interface) network configuration. � Support for the DHCP server function so that a DHCP server can be configured in the network.
Interface / Button Description WLAN WLAN switch WPS WPS switch to enable the WPS function USB Connected to storage device with a USB port Indicators Indicator meanings are described in the following table.
Indicator Color Off LAN 1, LAN 2, LAN 3, Green LAN 4 WLAN WPS Status Solid on Flashing Green LAN connection is not established, no cable is connected, and no active device is connected LAN connection is established There is data transmission at the LAN port (flashing frequency 4 Hz, 1:1 duty ratio (discontinuous ratio)) Off Wi-Fi RF (radio frequency) switch is disconnected Flashing There is data transmission at the WLAN port Solid on Wi-Fi RF switch is on Off Connection fails in the wirel
3 Configuration Preparation Hardware Connection 1. Location: Place H168M with its base on top of flat supports (e.g. office desk). To achieve the best effect, try to put H168M to a place with little interference during communication with wireless terminals (e.g. laptops with wireless network cards). To ensure the quality of WLAN, it is suggested to use wireless terminals in or close to the room where H168M is placed. 2.
1. Configure TCP/IP i. Choose [Start→Control Panel] from the Windows task bar to open the Control Panel page. ii. Double click Network Connections. iii. Right click Local Connections, and click Properties to open the Local Connection Property page. iv. Double click Internet Protocol (TCP/IP), and then click Properties to open the Internet v. Select Use the following IP address, and set the local IP address to the same network Protocol (TCP/IP) Properties page.
4 Login Prerequisite The device is connected correctly and the computer is configured correctly. H168M provides Web page-based configuration tools for users to complete configuration and management through the Web browser. The Web maintenance system provides users with certain Web page configuration rights according to the user level. 1. Start the Web browser. 2. Enter http://192.168.200.
Customer Information 1. This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On bottom of this equipment is a label that contains, among other information, a ZTEDL03BZXHNH168M]. If rrequested, this number must be product identifier of [US: ZTEDL01BZXHNH168M]. provided to the telephone company. 2.
b) The ringer equivalence number [01B] c) The USOC jack required [RJ11C], and d) The FCC Registration Number [US: ZTEDL03BZXHNH168M] Items (b) and (d) are indicated on the label. The ringer equivalence number (REN) is used to determine how many devices can be connected to your telephone line. In most areas, the sum of the RENs of all devices on any one line should not exceed five (5.0). If too many devices are attached, they may not ring properly.