ZXHN H298Q Home Gateway User Manual
ZXHN H298Q Home Gateway User Manual Manual No: Edition Time: LEGAL INFORMATION Copyright © 2021 ZTE CORPORATION. The contents of this document are protected by copyright laws and international treaties. Any reproduction or distribution of this document or any portion of this document, in any form by any means, without the prior written consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by contractual confidentiality obligations.
acquire any license to the subject matter herein. ZTE CORPORATION reserves the right to upgrade or make technical change to this product without further notice. Users may visit ZTE technical support website http://support.zte.com.cn to inquire related information. The ultimate right to interpret this product resides in ZTE CORPORATION.
1 Safety Precautions Before using the device, read the following safety precautions. ZTE bears no liability to the consequences incurred by violation of the safety instructions. Usage Cautions Read all the safety cautions carefully before using the device. Only use the accessories included in the package, such as power supply adapter. Do not extend the power cord, otherwise the device will not work.
Do not use any liquid or spray to clean the device. Use a soft dry cloth. Environment Protection Do not dispose the device or battery improperly. Observe the local regulations about the equipment disposal or treatment. Environmental Information The equipment you purchased has required the extraction and use of natural resources for its production. It may contain substances that are hazardous to people’s health and to the environment.
gaming devices and so on via the integrated interfaces: Ethernet, Wi-Fi, FXS ports. Technical Specifications Dimension 221 mm (L) × 186 mm (W) × 89 mm (H) Power adapter Input: AC 100 V – 240 V, 50 Hz/60 Hz Output: DC 12.0 V, 2.0 A Environment Requirements Operation temperature 0 °C – 40 °C (32 °F – 104 °F) Operation humidity 5% – 95% (non-condensing) please use the power adapter provided by the manufacturer.
Figure 3-1 The Front Panel Figure 3-2 The indicators Indicator Status Description Off Power off or the power supply is not connected. Green Power on.
Off The equipment is not powered on or the WAN port is disabled. On The link is activated.
Indicator Internet Status Description Off No detected data.The ZXHN H298Q is powered off. Flashing green Currently in data transmission. Solid green Solid red 2.4GHz 5GHz WPS The WAN connection is online. The device has a WAN IP address from IPCP, DHCP or statically configured. LED remains green in the case of disconnection due to idle timeout when PPP dial-on-demand is enabled. Green LED indicates that the routing connection state is up. The WAN connection is dialing up or fails to get online.
Phone1 Phone2 Off Has not been registered to the VoIP network. Flashing green Indicates when the associated telephone is off-hook. On Has been registered to the VoIP network.
Indicator USB Status Description Off No device connected to the USB port. Flashing green Currently in data transmission. On The USB device is connected. Side panel Figure 3-3 shows the interfaces on the side panel of the ZXHN H298Q. Figure 3-3 The Side Panel Interface Function USB USB2.0 host port, used for the USB storage device, printer or 3G/LTE Dongle connection.
Rear panel Figure 3-4 shows the interfaces and buttons on the rear panel of the ZXHN H298Q.
Figure 3-4 The Rear Panel Interface/Button Function On/Off Power switch, to power on or power off the device. Power Power supply port, It is connected to the power adapter. WPS WPS Push Button. Reset During power ON period, hold on this button for more than 5 seconds to reset the current settings to the factory default setting, and then the system restarts automatically. WLAN WLAN switch , to turn on / off the WLAN.
Phone1 Phone2 RJ-11 port, it is used to connect to the analog telephone. LAN1-LAN4 RJ-45 port, it is used to connect the modem to computer , STB or other network devices. WAN RJ-45 port, it is used to connect to the uplink Ethernet access network.
4 Hardware Connection Figure 4-1 shows the devices that are connected to interfaces of the ZXHN H298Q. Figure 4-1 Cable Connection After the devices are connected to the ZXHN H298Q device, press the power button. When the corresponding indicators on the front panel are On, you can enjoy various services provided by the service provider.
wireless router, a cordless phone, or a Bluetooth product. The product should be installed on the same floor as the applied area. Do not put other objects on the product. Try to reduce the number of obstacles between the product and a wireless terminal. Horizontally place the product in the middle of the applied area and do not put it in a corner. Do not place the product at a high position while it is placed horizontally. The recommended height is 1.2 to 1.5 meters.
5 Troubleshooting The Power indicator on the front panel is off after the power button is pressed. Power switch does not turn on. The power adapter is not correctly connected to the device. Be sure to user the power adapter supplied with the device. The Broadband indicator on the front panel is off after the device is powered on. The WAN link is not established. The Ethernet cable is not correctly connected to the WAN interface. Please contact the service provider for help.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC RF Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. This device complies with Part 15 of the FCC Rules.
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems Les dispositifs fonctionnant dans la bande de 5 150 à 5 250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.
