H560N Quick Start Guide Wireless Router Package Contents: ZXHN H560N Wireless Router, Power Adapter, Quick Start Guide, Warranty Card This product is a low Low-power product mainly used to extend the Wi-Fi signal, This product is targeted to provide 24 hours continuous service.
1 Connecting the Equipment Figure 1-1 Connecting the Equipment After the connections, check the LED indicators of your H560N. 2 LED indicator ZXHN H560N uses a 2-color LED, red and green, to indicate the status as follow. Color Direction RED ON: The device is booting or hardware error. Flashing: In Extender mode, H560N doesn’t associate any wireless router. Green ON: Device runs normally no wireless data transmitted Random Flashing: Data is being transmitted.
Reset Reset to factory default setting. 4 Safety Precautions Keep away from heat and keep good ventilation. Power off your H560N and remove all cable connections on thundery or rainy days. Only use the power adapter that is provided with the H560N. Keep your H560N dry during the storage, transportation, and operation. 5 Configuring the Computer For a computer connecting to your H560N with cables, perform the following steps to set the IP address: Windows 7/Vista 1.
6. Click the Obtain an IP address automatically and Obtain DNS server address automatically option buttons, and then click OK.
7. On the Local Area Connection Properties dialog box, click OK. Windows XP/2000 1. Right-click My Network and then select Properties from the shortcut menu. The Network Connections window is displayed. 2. Right-click Local Area Connection and then select Properties from the shortcut menu.
3.
4. On the Local Area Connection Properties dialog box, click OK. 6 Accessing Radio Network To access a radio network, you must ensure that a wireless network adapter is installed in your computer. Windows 7 1. In the notification area of the computer desktop, click click Connect. -7- icon.
2. Input security key and click OK. There is no security key setting by default. You can access it without input security key. If the security key is set, you must enter the correct key and click OK.. 3. Then the status of the wireless connection will be changed into Connected, your E5501/E5502 is successfully accessed.
Windows XP 1. R Right-click the icon, and then seleect View Available Wireless W Networks from fr the shortcut men nu. work Connection diialog box is displayedd, Select the SSID off your H560N, and th hen The Wireless Netw click Connect.
2. Input security key and click Connect. There is no security key setting by default. You can access it without input security key. If the security key is set, you must enter the correct key and click Connect. 4. Then the status of the wireless connection will be changed into Connected, your H560N is successfully accessed. 7 Configuring the AP/Router 1. Set the slide switch on side to AP mode 2. Start a web browser, enter 192.168.1.
4. Select Bridge or Router Mode，then click Next. If you select bridge mode，you will directly skip to STEP 7. 5. If you select router mode, Please select Internet connection type (PPPoE e.g.) and click Next.
6. 7. Then input the username and password for connecting to the Internet, click Next. Input the SSID Name and Password to set the wireless network, and then click Next. Note: To ensure wireless network security, WPA/WPA2-PSK-TKIP/AES are default configuration.
8. Click Finish. The web configuration for your H560N is completed. 8 Configuring the Extender 1. Set the slide switch on side to Extender mode，The Led indicator should be red at first, This means H560N doesn’t associated to any wireless router. 2. You can press the WPS buttons both of the H560N and the associated wireless router within 2 minutes, if the lights become green and first flash in 5Hz and then random blinking which shows the configuration is successful. The extender mode can be used now.
failed), you can access H560N through web configuration(address is 192.168.1.253) to “Networking”->”Wireless Extender” item to configure it manually. 9 Environmental Requirements Working temperature: 0 ~ 40 ℃ Storage temperature: -40 ℃ ~ 60 ℃ Working Humidity: 20% ~ 90% (non-condensing) Storage Humidity: 5% ~ 95% (non-condensing) 10 Frequently Asked Questions Q. Why can’t I connect my computer to H560N by Ethernet port? In AP mode(Both Router and Bridge), Ethernet port only can be used as WAN port.
recommended to contact the computer manufacturer, or refer to the user’ guides of your computer. Perform the following steps to verify that the driver of the wireless network adapter is properly installed and the wireless network adapter is enabled: a. Right-click the My Computer icon, and then select Properties from the shortcut menu. The System Properties dialog box is displayed. b. On the Hardware tab, click Device Manager. The Device Manager window is displayed.
11 FCC statement FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
any interference received, including interference that may cause undesired operation. Caution! Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
