ZXV10 ET501 Product Description Version: V2.0.1 ZTE CORPORATION No. 55, Hi-tech Road South, ShenZhen, P.R.China Postcode: 518057 Tel: +86-755-26771900 Fax: +86-755-26770801 URL: http://support.zte.com.cn E-mail: 800@zte.com.
LEGAL INFORMATION Copyright © 2017 ZTE CORPORATION. The contents of this document are protected by copyright laws and international treaties. Any reproduction or distribution of this document or any portion of this document, in any form by any means, without the prior written consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by contractual confidentiality obligations.
Contents About This Manual ......................................................................................... I Chapter 1 Safety Precautions.................................................................... 1-1 Chapter 2 Product Positioning and Features .......................................... 2-1 Chapter 3 Product Structure ..................................................................... 3-1 3.1 System Components ..............................................................................
This page intentionally left blank. II SJ-20161028111501-001|2017-04-10 (R1.
About This Manual Purpose As a new-generation ET-series videoconference terminal product launched by ZTE based on the android platform, the ZXV10 ET501 provides high-definition videoconference services. This manual is applicable to the ZXV10 ET501 high-definition video call terminal. It describes the product positioning and features, structure, functions, networking application, interfaces and protocols, and technical specifications of the ZXV10 ET501 terminal.
Manual Description ZXV10 ET501 Quick Start Guide Describes how to perform quick connection between terminals and the other equipment, and create a conference. ZXV10 ET501 Operation Guide Describes how to configure the terminal, create a conference, (Through the Remote Control & control a conference, perform system diagnosis and Touchscreen) maintenance by using the remote control & touchscreen. ZXV10 ET501 Operation Guide Describes how to control a terminal over the Web page.
Chapter 1 Safety Precautions Basic Requirements l l l l l When transporting, storing, or using device, keep it dry and avoid hard collision. Do not disassemble the device or open the enclosure. In case of any device failure, contact ZTE technical support. Without authorization, no unit or individual is allowed to modify the device structure, security, or performance design.
ZXV10 ET501 Product Description l l Ensure that there is no high-power device within the range of 5 meters around the device. Never use the same power-supply cable for the device and a high-power device nor connect the device to the same AC power strip with a high-power device. Ensure that there is no facility that affects heat dissipation within the range of one meter around the device. Ensure that the device vents are not blocked to avoid overheating.
Chapter 1 Safety Precautions 2. Power off the monitor, PA, and other peripheral devices. 3. Turn off the main power switch of the video conferencing system. Usage Instructions l l l l l Do not frequently pull out and plug the input and output connectors. Do not pull out and plug the HDMI cable before the switch is turned off. After you power off the device, wait for at least 15 seconds before you power it on. Before cleaning the product, power it off and disconnect the power cable.
ZXV10 ET501 Product Description l l l The router software must support the QoS protocol and algorithm. Otherwise, you should upgrade the router software. Configure QoS for video and ordinary services on routers to ensure that video packets are not discarded in case of network congestion. Configure Work Mode of the connected device in accordance with the following requirements: à When you connect a terminal, set the network interface to Auto, and set the network device on the peer end to Auto as well.
Chapter 1 Safety Precautions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution! Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 1-5 SJ-20161028111501-001|2017-04-10 (R1.
ZXV10 ET501 Product Description This page intentionally left blank. 1-6 SJ-20161028111501-001|2017-04-10 (R1.
Chapter 2 Product Positioning and Features Product Positioning The ZXV10 ET501 is a compact and delicate videoconference terminal based on the new generation ET smart platform. It provides an HD camera, two omni microphones, a wireless Wi-Fi module, and high-speed interfaces to provide users with 1080p HD video and broadband audio experience. The ZXV10 ET501 operates reliably and can be installed easily so it is applicable to small-scale videoconferences and households.
ZXV10 ET501 Product Description l l à Various control modes: The ZXV10 ET501 can be controlled through the touchscreen TV, remote control, and Web page. Using the touchscreen TV to control the ZXV10 ET501 makes the configurations and videoconferences easy. à The operation menus and videos are separately displayed, and the videos can be displayed on other devices through output interfaces.
Chapter 3 Product Structure Table of Contents System Components ..................................................................................................3-1 Produce Overview ......................................................................................................3-2 3.1 System Components The system is composed of the terminal and infrared remote control. For a description of the ZXV10 ET501 system components, refer to Table 3-1.
ZXV10 ET501 Product Description 3.2 Produce Overview Front Panel For the front panel of the ZXV10 ET501, see Figure 3-1. Figure 3-1 Front Panel of the ZXV10 ET501 There is a status indicator on the front panel of the ZXV10 ET501. If the ZXV10 ET501 is operating properly, the indicator is solid blue. l l Note: In shut-down status, press the power switch to turn the terminal on. In running state, Cut off the power supply to to shut the terminal down.
Chapter 4 Product Functions The functions of the ZXV10 ET501 are described as follows: Conference call l Calls a terminal to initiate an audio conference or videoconference: You can input the H.323 number, SIP number, or IP address of the peer device to initiate a conference. You can also initiate a conference through the address book or latest call records.
ZXV10 ET501 Product Description l l Supports the customized settings of the display content and display mode of the screen, including the terminal status icon, terminal name, system alert box, logo, volume indication icon, and transparency of the menu interface. Supports the time synchronization function of Simple Network Time Protocol (SNTP). Standard dual streams l l l Supports H.323 dual-stream ITU-T H.239 and SIP dual-stream BFCP.
Chapter 5 Network Deployment Table of Contents Networking Modes......................................................................................................5-1 Default Ports .............................................................................................................5-2 5.1 Networking Modes When a ZXV10 ET501 terminal is connected to the IP network, it can hold point-to-point conferences with other terminals in the network.
ZXV10 ET501 Product Description Figure 5-1 Networking Mode for Holding a Conference Through an External MCU 5.2 Default Ports For the default ports of the ZXV10 ET501, refer to Table 5-1. Table 5-1 Default Ports Default Port Connection Function Open Suggestion GK automatic (Optional) This port does not need to be search port open if the GK automatic search function is Type 1718 UDP disabled. 1719 UDP H.323 GK RAS port (Mandatory for H.
Chapter 5 Network Deployment Default Port Connection Function Open Suggestion Media stream port: (Mandatory) At least eight ports need to be RTCP and RTP open for an audio or video call. Type 3230–3280 UDP ports 5060 UDP SIP port (Mandatory for SIP) This port must be open for SIP calls. 5061 TCP SIP port (Mandatory for SIP) This port must be open for SIP TLS calls.
ZXV10 ET501 Product Description This page intentionally left blank. 5-4 SJ-20161028111501-001|2017-04-10 (R1.
Chapter 6 Interfaces and Protocols Physical Interfaces The rear panel of the ZXV10 ET501 provides various physical interfaces, including the video interfaces, network interface, power supply interface, and USB interface. For the physical interfaces of the ZXV10 ET501, see Figure 6-1. Figure 6-1 ZXV10 ET501 Interfaces For a description of the interfaces, refer to Table 6-1. Table 6-1 Interface Descriptions No. Description 1 Power input interface. Connects to a 12 V DC power supply.
ZXV10 ET501 Product Description No. Description 4 USB interface (USB). l Connected to a standard touchscreen TV so the ZXV10 ET501 can be controlled through the touchscreen TV. l Connected to a USB drive so you can browse and operate the files in the USB drive through the ZXV10 ET501. Note: If use the switch hub of USB interfaces, the ZXV10 ET501 can connect to 8 USB devices at most. • Interfaces 1, 2, and 3 are basic interfaces. USB interface is optional interface.
Chapter 6 Interfaces and Protocols Interface Description Protocol Type Supported Remark Network Architecture USB 2×USB USB2.0 1 - - - Connected to the - interface Power interface Power power adapter. 1 switch Tact switch with Two-color indicator The indicator is an indicator that can specify the located on the front standby status. panel. 6-3 SJ-20161028111501-001|2017-04-10 (R1.
ZXV10 ET501 Product Description This page intentionally left blank. 6-4 SJ-20161028111501-001|2017-04-10 (R1.
Chapter 7 Technical Specifications For the technical specifications of the ZXV10 ET501, refer to Table 7-1. Table 7-1 Technical Specifications of the ZXV10 ET501 Item Sub-item Detailed Specifications Compliant Standards Multimedia Framework Protocol ITU-T H.323, IETF SIP Video Encoding/Decoding H.264HP, H.264BP Protocol Audio Encoding/Decoding G.711A, G.711U, G.722, G.722.1 licensed Protocol from Polycom, G.722.1C licensed from Polycom Dual Video Standard ITU-T H.
ZXV10 ET501 Product Description Item Sub-item Environment Working Status Requirements Detailed Specifications Altitude <5000 m Temperature 0 °C to 40 °C (32 °F to 104 °F) Relative Humidity 10% to 90% Noise < 46 dBA SPL Minimum Illuminance 15 lux Recommended Illuminance > 300 lux Non-Working Status Physical Parameters Temperature -40 °C to 70 °C (40 °F to 158 °F) Humidity 10% to 90% Dimensions Package dimensions: 395 mm×270 mm×385 mm (Height × Width × Depth) Terminal size: 298 mm×13
Glossary FEC - Forward Error Correction IP - Internet Protocol MCU - Multipoint Control Unit NAT - Network Address Translation QoS - Quality of Service SNTP - Simple Network Time Protocol I SJ-20161028111501-001|2017-04-10 (R1.
