ZXV10 H100 Home Gateway User Manual (Draft) Confidential ZTE CORPORATION
ZXV10 H100 Home Gateway User Manual (Draft) Manual Version Product Version V1.0 Copyright © 2004 ZTE Corporation All rights reserved. No part of this documentation may be excerpted, reproduced, translated, annotated or duplicated, in any form or by any means without the prior written permission of ZTE Corporation. ZTE CORPORATION ZTE Plaza, Keji Road South, Hi-Tech Industrial Park, Nanshan District, Shenzhen, P.R.China Website: http://www.zte.com.
FAX: +86-755-26770160 Suggestions and Feedback To improve the quality of ZTE product documentation and offer better services to our customers, we hope you can give us your suggestions and comments on our documentation and fax this form to +86-755-26770160; or mail to “Marketing center 3rd floor ZTE Plaza, Keji Road South, Hi-Tech Industrial Park, Nanshan District, Shenzhen, P. R. China”. Our postcode is 518057.
Preface Manual Description Thank you for choosing the wireless Local Area Network (LAN) product-ZXV10 H100 of ZTE Corporation. The ZXV10 H100 home gateway is a modular access gateway in the center of a home network. It links multiple devices through Internet connections and provides users with safe communication, entertainment and storage functions. How to Use This Manual This manual describes in detail the installation and configuration methods of this product.
Format Meaning Press the first key, and then release it and then press the second key.For example, means pressing the “Alt” key, and then releasing it and then pressing the “F” key. 3. Mouse operation convention Format Click Double-click Meaning Press and release the left mouse button promptly Quickly press twice the left button of the mouse and then release it. Right-click Drag 4.
Contents 1 Introduction of the Product ................................................................................................................... 1-1 1.1 Introduction of the Product ............................................................................................................ 1-1 1.2 Packing List of the Product............................................................................................................ 1-1 1.3 Features of the Product ....................................
4.2.5 DHCP Server ...................................................................................................................... 4-3 4.2.6 DHCP Relay ....................................................................................................................... 4-3 4.2.7 DNS Relay.......................................................................................................................... 4-3 4.2.8 Bridge Connection.................................................................
Appendix A Radio Client Configuration................................................................................................. A-3 Appendix B FAQ ....................................................................................................................................... B-3 Appendix C Technical Specification........................................................................................................
1 Introduction of the Product 1.1 Introduction of the Product Thank you for choosing the wireless Local Area Network (LAN) product-ZXV10 H100 of ZTE Corporation. The ZXV10 H100 home gateway is a modular access gateway in the center of a home network. It links multiple devices through Internet connections and provides users with safe communication, entertainment and storage functions. 1.
ZXV10 H100 Home Gateway User Manual (Draft) WAN side: ADSL interface: Built-in splitter, compatible with ADSL/ADSL2/2+ LAN side: Fast Ethernet port: four, RJ-45, 10/100Mbps, complies with the IEEE802.3 and IEEEE802.3u standards WLAN interface: Complies with the IEEE 802.11g/b standard, built-in antenna Blue Tooth interface: Supports Core V1.2, built-in antenna POTS interface: RJ11, 2-port USB interface: 1 master (V2.0) & 1 slave (V1.
Chapter 1 Introduction of the Product The indicators on the front panel of the ZXV10 H100 are shown below: The meanings of the indicators on the front panel of the ZXV10 H100 are show in the table below: Indicators Status On Fault indicator.
ZXV10 H100 Home Gateway User Manual (Draft) table below: Indicators Status The green indicator is solid LAN 1 2 3 4 Description The physical link connection is normal on Off The device is powered off/the network cable is unconnected Flashing Flashing according to the network traffic On the rear panel of the ZXV10 H100, are two RJ–45 LAN network interfaces, three RJ–11 interfaces, the reset button and the power supply slot.
Chapter 1 Introduction of the Product Internet Explorer 5.0 or later, or Netscape Communicator 4.0 or later) should be installed in.
2 System Connections 2.1 System Application Environment The main application environment of the ZXV10 H100 home gateway is shown below: 1 2 3 4 5 7 8 6 9 * # 8 P W R O K W IC0 A CT /CH 0 W IC0 A CT /C H0 E T H A CT A C T/C H1 A C T/C H1 C O L 2.2 Connecting the LAN Network Interface You can connect the H100 to your computer, Ethernet hub or switch.
ZXV10 H100 Home Gateway User Manual (Draft) access to the network through wireless signals and adjust the antenna on the rear panel of the H100 to the ideal direction to get the effective coverage. You had better put the H100 in the center of your radio network. Generally, the higher your antenna is, the better the performance is. Ensure that the H100 is in the most ideal position in the whole office or home.
3 Client Settings 3.
ZXV10 H100 Home Gateway User Manual (Draft) 3.2 TCP/IP Configuration For access to the Internet through the H100, you must configure the PC in the LAN to be in the same subnet segment with the H100. The default network settings of the H100 are: the IP address of 192.168.1.1 and the subnet mask of 255.255.255.0. Attention: The settings are subject to your network requirements. Be sure to install the above configurations for the first access to the WEB configuration page of the H100.
Chapter 3 Client Settings 3.3 Configuration Inspection After the above preparations, switch on the H100, and you will see that the power indicator is on. At the same time, the H100 executes the device start-up process and detects the connected devices. You can see from the indicators which devices have been connected to the H100 successfully. The indicators of the network interfaces connecting to successfully connected devices will be solid on.
ZXV10 H100 Home Gateway User Manual (Draft) • Type in “ping 192.168.1.1” at the cursor position in the interface popped up and then enter. If the following information occurs: Pinging 192.168.2.1 with 32 bytes of data: Reply from 192.168.2.1: bytes=32 time=2ms TTL=64 the computer has been successfully connected to the H100; • If the following information occurs: Pinging 192.168.2.1 with 32 bytes of data: Request timed out.
Chapter 3 • Client Settings An error occurs in the installation. Please check the following items in turn: Whether the Ethernet cable between the H100 and your PC is correctly connected. Whether the network adapter driver on your PC is correctly installed. Whether the indicators of the LAN interface in the H100 and the network card in your PC are both on. Whether the TCP/IP protocol is correctly configured in your PC. If the IP address of the H100 is 192.168.1.
4 WEB Configuration The H100 provide configuration tools based on the WEB interface to facilitate configuration and management through the WEB explorer. For ease of operation, you can use one cross-over or straight-through Ethernet cable to connect a PC to the Ethernet interface of the H100 in the first configuration of the H100.
ZXV10 H100 Home Gateway User Manual (Draft) 4.2 Basic Configuration Click the button in the WEB interface to enter the basic configuration of the H100.
Chapter 4 WEB Configuration 4.2.2 ADSL WAN Connection Click the WAN Connection link in the left of the interface to enter the [WAN Connection] interface, where you can set ADSL-based access modes, such as Bridge, PPPoE, PPPoA and IPoA. Attention: For the PPPoE, PPPoA and IPoA connection modes, the Network Address Translation (NAT) function is activated in the H100 by default. The first [WAN Connection] interface shows the list of configured VCCs (Virtual Channel Connection) in the H100.
ZXV10 H100 Home Gateway User Manual (Draft) Click the button to switch to the WAN connection configuration interface. The following parameters are the ATM-related configuration parameters of a WAN connection: VPI The Virtual Path Identifier is in an 8-bit area of the ATM cell head, indicating the routed virtual path of the cell. Value range: 0-255 VCI The Virtual Channel Identifier is the unique digital label in a 16-bit area of the ATM cell head, indicating the virtual channel ID.
Chapter 4 WEB Configuration 4.2.2.1 Bridge (Pure Bridge) Connection Upon configuration of the ATM-related parameters, select the button in front of Bridge Config to configure the related parameters of a Bridge (pure bridge) connection. NAS Interface No. Bridge connection interface No.. The configured No. follows the character string “nas” when an interface is created, for example nas0, nas1. Encapsulation Type Value range: LLC/VCC.
ZXV10 H100 Home Gateway User Manual (Draft) nas interface in the interface. 4.2.2.2 PPPoE Connection If you want to implement the PPPoE dial-up connection through the H100, a PPPoE connection must be set up. Upon configuration of the ATM-related parameters, select the button in front of PPPoE to configure the related parameters of the PPPoE connection. Nas Interface No. Generated 2684 bridge interface No., value range: 0-9. Encapsulation Type Packet encapsulation type, value range: LLC/VC.
Chapter 4 WEB Configuration becoming idle for a period of time. The idle connection indicates that no packet is received/sent. Mode Vale range: DIRECT/AUTO. Selection of DIRECT indicates that the PPPOE connection is always on line. Selection of AUTO indicates that the functions of idle timeout and auto-redial triggered by traffic are activated. Trace Whether the information controlling the session negotiation should be displayed at the console, value range: ON/OFF.
ZXV10 H100 Home Gateway User Manual (Draft) Click the button to remove the session from the configuration file and stop it. 4.2.2.3 PPPoA Connection If you want to implement the PPPoA dial-up connection through the H100, a PPPoA connection must be set up. Upon configuration of the ATM-related parameters, select the button in front of PPPoA to configure the related parameters of the PPPoA connection.
Chapter 4 WEB Configuration The PPPOA Session List shows the designated PPPOE sessions that have been created. Click the button to stop and delete a PPPOA session. Click the button to remove the session from the configuration file and stop it.
ZXV10 H100 Home Gateway User Manual (Draft) 4.2.2.4 IPoA Connection If your ISP provides the access mode of the IPoA-based static connection, you can select the IPoA access mode. Upon configuration of the ATM-related parameters, select the button in front of IPoA to configure the related parameters of the IPoA connection. ATM Interface No. The configured No. follows the character string “ATM” when an ATM interface is created, for example atm0, value range: 0.
Chapter 4 WEB Configuration 4.2.3 Static Route Click the Routes link in the left of the interface to enter the route configuration interface of the H100. In the [Route] tab, you can configure and view the static route information of the H100. The main interface shows the static route list of the H100. You can configure a new route, modify or delete the existing routes. The [RIP] tab in the interface is used to configure the dynamic route protocol RIP of the H100.
ZXV10 H100 Home Gateway User Manual (Draft) If you need to modify an existing route, select it in the route list. Its configuration is shown in the set box. Modify the next hop IP address and click the button. If you need to delete an existing route, select it and click the button. After that, the route list is refreshed. 4.2.
Chapter 4 WEB Configuration To activate the RIP function on the H100, you need to configure Zebra and RIP with the and buttons, and then activate the RIP function with the and buttons. In the Zebra configuration interface shown below, you can configure Hostname, Password, Enable Password and interface IP address.
ZXV10 H100 Home Gateway User Manual (Draft) In the RIP configuration interface shown below, you can configure Hostname, Password, Enable Password and RIP Version (RIP version No.) and the interface where the RIP is activated. 4.2.5 DHCP Server The DHCP Server List Interface shows the configuration parameters of the current DHCP server. The DHCP server configuration interface will show up when you click the or button. In this interface, you can set the configurations of the DHCP server.
Chapter 4 WEB Configuration In the DHCP Server Configuration Interface, you can set the configurations of the DHCP server. Interface The interface for starting the DHCP server. Starting IP Address The starting address from the IP address pool allocated by the DHCP server. End IP Address The end address from the IP address pool allocated by the DHCP server. Subnet The subnet that the IP belongs to. Gateway The gateway IP address needed for communication of the DHCP client on the network.
ZXV10 H100 Home Gateway User Manual (Draft) 4.2.6 DHCP Relay The DHCP Relay Configuration Interface shows the status of the DHCP Relay module and the related configuration parameters. Status The current status of the DHCP Relay module. Server IP Address The IP address of the DHCP server. Server Connected Interface The interface of the H100 connecting to the DHCP server, whose name should be a valid character string.
Chapter 4 WEB Configuration 4.2.7 DNS Relay DNS Relay Configuration Interface: DNS Server IP The DNS server IP address at the LAN side set in [Local DNS Configuration] option. Upon configuration, you should click the button. DNS Server 1 and DNS Server 2 When the DNS relay function is configured, the IP addresses of the DNS servers should be filled in the [DNS Server 1] and [DNS Server 2] boxes. Click the button to complete the setting.
ZXV10 H100 Home Gateway User Manual (Draft) 4.2.8 Bridge Connection Click the Bridge link in the left of the interface to enter the H100 bridge configuration interface. In this interface, you can create a network bridge interface and configure its properties and the related properties of the STP protocol. The main bridge configuration interface shows the list of the existing bridge interfaces.
Chapter 4 WEB Configuration Click the button to enter the interface for creating a network bridge interface, as shown below. In this interface, you can designate the name of the bridge interface to be created (Bridge Name), add the LAN side interface to the bridge group as a bridge interface, or configure whether to enable the STP protocol or not (STP is enabled if Spanning is Enable; it is disabled if Spanning is disabled).
ZXV10 H100 Home Gateway User Manual (Draft) Click the [Spanning] tab in the bridge configuration interface to enter the STP parameter configuration interface, as shown below. In this interface, you can configure the Link Cost property of the member ports in the network bridge.
