ZXV10 W300 Wireless ADSL Router Quick Installation Manual ZTE CORPORATION 1
ZXV10 W300 Wireless ADSL Router Quick Installation Manual Manual version 20060810-R1.0 Product version Copyright © 2005 ZTE CORPORATION All rights reserved. No part of this documentation may be excerpted, reproduced, translated, annotated or duplicated, in any form or by any means without the prior written permission of ZTE CORPORATION. * * * * ZTE CORPORATION ZTE Plaza, Keji Road South, Hi-Tech Industrial Park, Nanshan District, Shenzhen, P. R. China Website: http://support.zte.com.
Contents 1 PRODUCT INTRODUCTION ...............................................................................5 1.1 PRODUCT FEATURES .............................................................................................5 1.2 PACKING LIST .......................................................................................................6 1.3 SYSTEM REQUIREMENT.........................................................................................7 2 INTRODUCTION TO THE HARDWARE .................
4.7.4 Dynamic DNS.............................................................................................28 4.7.5 TR069.........................................................................................................29 5 TECHNICAL SPECIFICATIONS .......................................................................32 5.1 HARDWARE SPECIFICATIONS ...............................................................................32 5.2 SOFTWARE SPECIFICATIONS ......................................
1 Product Introduction Welcome you to use the ZXV10 W300 Wireless ADSL Router. ZXV10 W300 series products are home user oriented wireless broadband router integrating ADSL, AP and LAN Switch. The ZXV10 W300 router acts as the center of a home network and lets all of the devices in a home network share the same Internet connection, providing the users with Triple play services integrating wired or wireless communications, voice and video.
ZXV10 W300 Quick Installation Manual Support eight PVC connections and auto-negotiation Support PPPoE, PPPoA, Static, DHCP, Bridge and CLIP connections. Support NAT, IP filtering and firewall functions. Support network configuration using DHCP Support UPnP, SNTP, DMZ, IGMP Snooping, IGMP Proxy and DNS Proxy.
Chapter 1 Product Introduction If any of the above components is missing or damaged, please contact your dealer. In case of replacement, please keep the package and existing components of the product well. 1.3 System Requirement Before using the ZXV10 W300 product, please ensure the following system requirements: You have subscribed the ADSL service.
2 Introduction to the Hardware 2.1 Indicators There area eight indicators on the front panel of the ZXV10 W300. These indicators indicate the service running status of the ZXV10 W300. The indicates are described in the table below. No. 8 Indicators Identification Color 1 Power supply Red 2 Internet Green 3 Running Green Description Steady ON: Indicates the power supply is connected and turned on.
Chapter 2 No. Indicators 4 WLAN 5 LAN Identification Introduction to the Hardware Color Green Green 6 ADSL link Green Description Indicates a device operation failure. Steady ON: Indicates Wi-Fi is switched on. Flashing: The indicator flashes according to the network traffic flow. OFF; Indicates Wi-Fi is switched off. Steady ON: Indicates the device has been connected to the LAN. Flashing: The indicator flashes according to the network traffic flow.
ZXV10 W300 Quick Installation Manual 2.2 Ports and Buttons There are nine ports and buttons on the side of the ZXV10 W300 device. Ports and buttons are described in the table below. No. 10 Port Description identification 1 DSL Connected to the ADSL line or splitter via RJ-11 telephone wire 2 LAN1~ LAN4 Connected to the PC NIC via RJ-45 cable 3 Wi-Fi WLAN radio frequency ON/OFF switch 4 Reset The device is power on.
3 Quick Installation It is assumed that you have signed up for the ADSL service from the Service Provider. In addition, this chapter contains the basic product configuration only, which is applicable to the network environment of general subscribers or enterprise users. 3.1 Hardware Connections The following diagram illustrates the recommended connections and installation.
ZXV10 W300 Quick Installation Manual Note: Phone sets connected in parallel before the splitter will cause many problems, e.g. the ZXV10 W300 device cannot be connected to office-end devices; networks cannot be accessed or the network access speed will be slow. To connect phone sets before the splitter, a microfilter should be connected in serial in front of the phone sets (In general, only one microfilter can be connected in front of the splitter to reduce interference). 1.
Chapter 3 Quick Installation PHONE: Port connected to a phone set 3. Connect the LAN port of the device to a PC with a NIC using an RJ45 cable. 4. Connect the power adapter to the Power port of the device, and plug the adapter to the AC power socket. The device will be powered on and operate after you pushing the power switch button. Warning Please use the power adaptor we provided. Other power adaptor may make the device unable to work normally or even damage it. 3.
ZXV10 W300 Quick Installation Manual 3.3 Computer Setup 3.3.1 Checking Computer Settings If your computer uses a proxy server to access the Internet, first you must disable the proxy service. You must also close the VPN software and the firewall running on your computer. In the Microsoft Internet Explorer, check the proxy service settings as follows: 1. In the browser window, select Tools > Internet Options. 2. Click the Connections tab and then the LAN Settings button. 3.
Chapter 3 Quick Installation 1) From the Windows taskbar, select Start > Control Panel. 2) Double-click the Network Connection icon. 3) From the right-button menu, select Local Area Connection > Properties. Select Internet Protocol (TCP/IP) > Properties. 4) In the Internet Protocol (TCP/IP) Properties dialog box, click Use the following IP address to specify the local computer's IP address to the same network segment as the LAN port address of the device, i.e. 192.168.1.
4 Wizard You need relevant technical knowledge and experience for configuring the ZXV10 W300 device. To simplify your operations, it is recommended to use the wizard for quick configuration. A little configuration will allow you to establish the connection for basic use. However, to use advanced functions of the device, you need to configure other options. Make sure the following issues before configuration: The computer has been connected to the Ethernet port of the device using a network cable.
Chapter 4 Wizard Select the language for web configuration. Enter your Username and Password (which are admin and admin by default), and then click the Login button to enter the configuration main page. 4.2 Setting ATM PVC Click the Wizard button on the main page to enter the quick configuration wizard which allows you to configure the DSL Modem quickly. In the first step, the page displays the PVC default value of the WAN interface. The VPI/VCI value depends on the operational environment.
ZXV10 W300 Quick Installation Manual 4.3 Connections You can select one of the ADSL access modes, including PPPoE, PPPoA, Bridge, DHCP, Static Bridged, Static Routed and CLIP, and then configure data encapsulation. Please contact your service provider for the settings of connection and encapsulation. After completing the setting, click Next on the page.
Chapter 4 Wizard 4.4 Setting Configurations The configuration page you enter may be different depending on the type of connection you selected. The configuration sequences in the cases of the seven types of connections are as follows, respectively: PPPoA and PPPoE: ATM PVC Setting > Connection Type > PPP Username and Password > Configuration Information > configuration completed. DHCP and Bridge: ATM PVC Setting > Connection Type > Configuration Information > configuration completed.
ZXV10 W300 Quick Installation Manual your service provider for the specific parameters. After completing the setting, click Next on the page. 4.5 Configuration Information The configuration information page may be different depending on the connection type you selected. You can check if the settings are correct. To modify settings, click the Back button to return to the previous step. Clicking the Submit button will allow all the settings take effect. 4.
Chapter 4 Wizard 4.7 Other Common Configurations 4.7.1 Creating New WAN Connections If you have created a connection (e.g. Internet access) via the wizard, you can also create another WAN connection (service subscription required) for the access to the services like IPTV. Click the Basic Configuration button on the main page, and then click Create WAN Connection on the left side of the page to configure WAN connections, including Bridge, CIP, PPPoA, PPPoE, Static and DHCP.
ZXV10 W300 Quick Installation Manual 1 3 2 4 PPPoE parameter description 1. Globally unique parameters of the WAN connection Name: Specifies the name of the connection to be created Type: Specifies the type of the connection to be created Options: Enables firewall and NAT 2.
Chapter 4 Wizard Hold connection: This option can be configured when the Dial as needed option is not selected. It specifies the waiting time for connecting your service provider before the connection is terminated. MTU: Maximum transmission unit of the DSL connection, i.e., the maximum number of bytes of data packets transmitted using TCP/IP. The greater the MTU value, the larger the encapsulated package, which improves the transmission rate in theory.
ZXV10 W300 Quick Installation Manual 4. PVC parameter description PVC: PVC (permanent virtual circuit) provides a permanent logical connection between two terminals within a packet network during the contract application period. PVC does not require the call setup or clear procedure. VPI: VPI (virtual path identifier) contains the first part of the ATM routing address to identify the virtual path between users or between user and ATM network.
Chapter 4 Wizard 1. Click the Basic Configuration button on the main page, and then click the Create WAN Connection on the left side of the page to enter the PPPoE Connection Settings page. 2. Type in the name of the PPPoE connection to be created in the Name box, e.g. “PPPoE1”. 3. Set the NAT and Firewall options to default (enable). 4. If you select VLAN from Sharing, please configure VLAN ID and Priority according to the parameter description. 5. Input parameters in the PPP settings area.
ZXV10 W300 Quick Installation Manual 4.7.2 UPnP In the case the ZXV10 W300 works in the routing mode, if the terminal user runs special applications, e.g. BitComet and BitSpirit, you must enable UPnP on the device to optimize the performance. Click the Advanced Configuration button on the main page, and then UPnP on the left side of the page to enter the UPnP configuration page. In this page, enable or disable the UPnP function and specify the UPnP WAN and LAN connections.
Chapter 4 Wizard Enable UPnP: Enables/disables the UPnP function. The default is disabled. WAN connection: Selects the WAN side connection LAN connection: Selects the LAN side connection 4.7.3 DMZ When the device operates in Routing mode, if you try to access a service on a host placed in the intranet from an external network, the DMZ host function should be enabled.
ZXV10 W300 Quick Installation Manual Enable DMZ: Enables/disables the DMZ function. The default is disabled. Select WAN connection: Selects the WAN connection using DMZ. Select LAN: Selects the LAN connection using DMZ Select a LAN IP address: DMZ host IP address. This host is open to the external network. Meanwhile, you must consider the security risk of the local network. 4.7.
Chapter 4 Wizard the ZXV10 W300 device and configure DDNS (requires service subscription from your service provider and network carrier). WAN connection: The default is the WAN connection for the ZXV10 W300. DDNS server: Specifies the DDNS server. Dynamic DNS: Enables/disables DDNS client for the WAN connection. Server: DDNS server URL (This option is displayed and needs to be configured only when GNUDIP http is selected. The default URL is http://ns.eagleeyes.com.
ZXV10 W300 Quick Installation Manual communications between CPE and ACS. CPE WAN management protocol defines its own mechanism. It allows the automatic CPE security configuration, and additionally, incorporates other CPE management functions into a common framework. The TR069 protocol allows remote device management.
Chapter 4 Wizard the authentication by CPE. Default WAN connection: The default WAN connection that TR069 uses. Enable periodic Inform: Enables/disables the periodic connection from the ZXV10 W300 to the ACS. If it is enabled, you must input a value in the Inform cycle time field. Inform cycle time: Check the Enable periodic Inform check box and configure the time between a successful connection and a new connection attempt to the ACS server.
5 Technical Specifications 5.1 Hardware Specifications 1. ADSL interface Compliant standards: ITU G.992.1, G.992.2, G.992.3, G.992.5 and ANSI T1.413 Issue 2. Line impedance: 100 Ù Connection line: A pair of ordinary telephone wires Connector: RJ-11 2. LAN interface Interface: 4 10/100 Base-T, IEEE 802.3/802.3u Connector: RJ-45 Automatic recognition straight-through cable of crossover cable and 3. WLAN interface Working frequency band: 2.4GHz~2.
Chapter 5 Technical Specifications Enviroment requirement Working temperature: -5 ºC ~ 45 ºC Storage temperature: -40 ºC ~ 70 ºC Working humidity: 5% ~ 95% Storage humidity: 10% ~ 100% 8. Hardware specification Dimensions: 220mm × 145mm × 39mm (W × L × H) Weight: 0.5kg (without power supply) 5.2 Software Specifications 1.
ZXV10 W300 Quick Installation Manual 3. Routing Static routing Dynamic routing and policy routing NAT, ALGs Firewall DNS Proxy, IGMP Proxy UPnP DMZ 4. NM WEB SNMP TR069 5. WLAN 34 IEEE 802.
6 Qs and As This chapter describes how to troubleshoot problems in the ZXV10 W300 installation and operations. For other problems not contained in this chapter, please contact your Service Provider for help.
ZXV10 W300 Quick Installation Manual Problem PC unable to access the network WLAN unable to be connected Unable to browse Internet web pages on the computer Troubleshooting Use the Ping command to check if the network interface IP address (preset to 192.168.1.1) of the device can be pinged from the computer. If not, check the Ethernet cable connection. Check if the indicator status is normal.
