Wireless Controller for N-SL Model NO.
Product Description This product is a wireless Bluetooth gamepad, which belongs to the wireless blue control gamepad (using wireless Bluetooth technology). It can be remotely controlled and easy to operate. It can be used for the Switch console. It also supports PC x-input PC games. Product Parameter Voltage: DC 3.6-4.2V Working Current: <30mA Sleep Current: 0uA Battery Capacity: 550mAh Use time: 6-8 hours Charging time: 2-3 hours Vibration Current: 90-120mA Charging Current: >350mA USB length: 70 cm/2.
Pairing and Connecting ZL Bluetooth connection in console mode: Step 1: Turn on the console, click the System settings menu button on the main page interface (Figure ①), enter the next menu option, click the Airplane Mode option (Figure ②), and then click the Controller Connection (Bluetooth) (Figure ③) option Turn on its Bluetooth function (Figure ④).
Step 3: Press and hold the HOME button for 3-5 seconds to enter the Bluetooth search pairing mode, LED1-LED4 marquee flashes quickly. After the controller is successfully connected to the console, it vibrates and automatically assigns the corresponding channel indicator of the controller to be steady on.
Motor Vibration Function The controller has a motor function; it uses a pressure-sensitive motor; the console can manually turn on or off the controller motor vibration. ON/OFF Motor intensity can be adjusted under SWITCH platform Adjust the motor intensity: turbo+ left 3d up, the intensity increases by one gear turbo+ left 3d down, the intensity is reduced by one gear A total of 4 levels: 100% strength, 70% strength, 30% strength, 0% strength, Power-on default 100% Frequently Asked Questions 1.
Power off/Charge/Reconnect/Reset/Low Battery Alarm status Description When the controller is turned on, press and hold the HOME button for 5S to turn off the controller. power off When the controller is in the back-connecting state, it will automatically shut down when it cannot be connected after 30 seconds. When the controller is in the state of code matching, it will enter back connection when the code cannot be matched after 60 seconds, and it will automatically shut down .
Low battery alarm When the controller battery voltage is lower than 3.6V (according to the principle of battery characteristics), the light of the corresponding channel flashes slowly, indicating that the controller is low and needs to be charged. 3.45V low power shutdown.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.