User Manual
Instruction manual for Infra Garde 200° Max / 140° Max Page 1/2
1
2
3
4
5
8
Use a suitable screwdriver to when
removing the detector from the base to
ensure the housing is not damaged.
To ensure the operational reliability,
install the detector in an area that is
protected from weather the elements.
Avoid heat sources in the immediate
coverage area as well as under the
detector.
Inserting the
cable
from below
Impulse, approx. 10 seconds
Approx. 5 lux (night)
to
7
Preparation
Installation
Power supply
Settings
6
Alignment
Phase/outer conductor (L): brown;
Switching output/switched phase/outer
conductor (L') white;
Neutral/neutral conductor (N): blue;
Earth connection that is not used
(
class II
)
:
g
reen/
y
ellow
Installation
Connection diagram
For testing purposes, areas can be covered with
standard electrical tape before the cover is
permanently attached.
Frontal detection
NOT SENSITIVE
Distance approx. -50%
Tangential detection
= SENSITIVE
Coverage area
9
Therangeisdependentontheinstallationlocationandthedirectionofmovement.
Asthemotiondetectorreactstotemperaturefluctuationsbetweentheheatsourceand
ambienttemperature,therangecanvarydependingontheinstallationlocation.
Standard connection
Includes option to control the motion
detector via an external switch
(interruption of approx. 2 sec)
Locating the
coverage area