User Guide

12
12. Power Saving Settings
This is a function that avoids repeated alarms for the same
event. You can choose an alarm interval of different lengths, if
the interval is 5 minutes, then the camera is triggered at 08:00,
you will receive an alarm message, and you will not receive a
new alarm push in the next 5 minutes, even if motion detection
continues to occur.
NOTE: This function is off by default, you can set it as needed.
You can choose a different recording length if you set the
recording length to 20 seconds, then after the camera is
triggered, you can view the 20 seconds of alarm video in the
history of cloud playback.
12.2 Maximum shooting time & recording time
12.1 Alarm interval & shooting interval
<
Power saving settings
Shooting interval 5 minutes >
Maximum shooting time 20 minutes >
5:51
<
Shooting interval
Off
2 minuters
5:51
5 minuters
10 minuters
<
Maximum shooting time
10 seconds
5:51
20 seconds
30 seconds
The shorter the maximum shooting time setting, the lower
the power consumption.