Installation Sheet

Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice
MS2624
PARTS ILLUSTRATION & INSTALLATION INSTRUCTIONS
®
Page 1 of 2
ZURN LIGHT COMMERCIAL PLUMBING PRODUCTS ¨ 2640 South Work Street ¨ Falconer, NY 14733
Phone: [phone] ¨ Fax: [phone] ¨ World Wide Web: www.zurn.com
Form #LC3 Date: 6/9/05 C.N. No. 93523 Rev. C
PARTS LIST
KEY NO. PART NO. DESCRIPTION
1 66805-001 SELF RIMMING DROP-IN SINK
2 60342-002 LOCK DOWN BAR (4 Required)
3 64177-001 #12 x 1" HEX HEAD SHEET METAL SCREW (4 Required)
4 67042-001 DRAIN BODY (Molded)
5 67039-001 GASKET
6 67040-001 CORK GASKET
7 67041-001 LOCKING NUT FOR DRAIN BODY
8 67038-001 PIPE SEAL
9 67037-001 LOCKING NUT FOR PIPE
CARE AND CLEANING
The surface of the Counter Top Drop-In Sink may be cleaned with a mild detergent soap solution in warm water using a soft
material cloth. For strong stains, a stronger soap or powder detergent may be used. Never use an abrasive powder, steel wool
pad, or similar types of materials. This will diminish the surface of the sink. On a periodic basis, apply a coat of a quality
silicone base marine polish to maintain the fine finish of the product.
STUD INSTALLATION
ASSEMBLY OF PARTS ILLUSTRATION