Installation Sheet

P6000-M-ADA-DF
Dual Flush Handle
Installation Instructions
1. Turn off water at the stop valve.
2. Release any pressure from the valve by
pressing existing handle.
3. Remove existing handle from
the flush valve.
6. Apply wall sticker in a clearly
visiable area, either on the wall
area above the Dual Flush Handle,
over toilet paper dispenser or on
stall door.
Pull Up Handle for
Less Water to Flush Liquid Waste
Push Down Handle for
Normal Flush for Solid Waste
4. Install Zurn Dual Flush Handle with
Zurn logo aligned toward the top of flush
valve.
5. Tighten handle nut making sure that
the Zurn Logo is in the centered, up
position.
Align Zurn Logo
to center top of
handle
Conserve Water With Zurn Products
ZURN PLUMBING PRODUCTS GROUP
COMMERCIAL BRASS PRODUCTS
5900 ELWIN BUCHANAN DRIVE
SANFORD, NC 27330
PHONE: [phone]
FAX: [phone]
www.zurn.com
In Canada: ZURN INDUSTRIES LIMITED
3544 NASHUA DRIVE
MISSISSAUGA, ONTARIO L4V1L2
PHONE: [phone]
FAX: [phone]
Form No. FVXXX, 8/05
WALL
STICKER