Specification Sheet

Copper Manifold with 3/4" Inlet,
Spun Closed End and 1/2" Outlets – QCM43-_GX
Specification Sheet Tag ____________
Engineering Specification: Zurn PEX
®
1" Type L Copper Mani-
fold comprised with 3/4" Zurn PEX XL brass crimp inlet, spun
closed end and 1/2" Zurn PEX XL brass crimp outlets. The 1/2"
Zurn PEX Xl brass PEX outlets are brazed to the header, and
manufactured from EcoBrass
®
, C69300. These fittings, as a sys-
tem with Zurn PEX
®
tube, are pressure rated at 160 PSI at 73°F,
100 PSI at 180°F, and 80 PSI at 200°F. These fittings are listed by
NSF as complying with the following standards: NSF/ANSI Stan-
dard 14, NSF/ANSI Standard 61 including Annex G, ASTM F877,
CSA B137.5, and ASTM F1807.
Part Number Description 'A'
QCM43-4GX 3/4" PEX Crimp Inlet x Spun Closed w/ (4) 1/2" PEX Crimp Outlets 10-3/4" [273]
QCM43-6GX 3/4" PEX Crimp Inlet x Spun Closed w/ (6) 1/2" PEX Crimp Outlets 14-3/4" [375]
QCM43-8GX 3/4" PEX Crimp Inlet x Spun Closed w/ (8) 1/2" PEX Crimp Outlets 18-3/4" [476]
QCM43-12GX 3/4" PEX Crimp Inlet x Spun Closed w/ (12) 1/2" PEX Crimp Outlets 26-3/4" [679]
Dimensional Data: Inches and [mm] are subject to manufacturing tolerances and change without notice.
Rev. C Date: 8/13/2010 C.N. No. XXXXX
Dwg. No. 66777 Prod. No. QCM43-_GX
ZURN PEX
®
PLUMBING AND RADIANT HEATING SYSTEMS HWY 11 EAST, COMMERCE, TX, U.S.A. 75429 PHONE: [phone] FAX: [phone] WEBSITE: www.zurnpex.com
IN CANADA: ZURN INDUSTRIES LIMITED 3544 NASHUA DRIVE, MISSISSAUGA, ONTARIO L4V 1L2 PHONE: [phone] FAX: [phone]
Accessories
___ QCLP3X 1/2" QickClamp
®
Crimp Ring
___ QCLP4X 3/4" QickClamp
®
Crimp Ring
___ QCR3X 1/2" Copper Crimp Ring
___ QCR4X 3/4" Copper Crimp Ring
___ QSOET3X 1/2" Stainless Steel Crimp Ring
___ QSOET4X 3/4" Stainless Steel Crimp Ring