Warranty

ZURN PEX®, INC. 116 Maple Street, Commerce, TX 75428, 855-663-9876
In Canada: ZURN INDUSTRIES LIMITED 7900 Goreway Drive, Unit 10, Brampton, Ontario L6T 5W6, 905-405-8272
Form No. 370-058, 4/18
ZURN TERMS AND CONDITIONS
PRICE AND TERMS OF PAYMENT
Terms are net, payable 30 days from date of invoice. All pricing in U.S. currency.
The Buyer shall pay all sales, consumers, or other applicable taxes. A 1-1/2%
monthly (18% annual) service charge will be added to the outstanding balance
of all past due invoices.
Minimum invoice $100.00. Zurn Industries, LLC ("Zurn") reserves the right
to apply a minimum order charge in order to meet the $100.00 minimum
invoice requirement. All orders are subject to credit approval by the Zurn
Credit Department prior to the acceptance of an order. Orders may be refused,
delivery may be withheld, or shipment stopped in transit without any liability
on Zurn's part at Zurn's sole discretion based upon Buyer's credit worthiness as
determined by Zurn.
FREIGHT
Zurn is pleased to provide an industry-leading $3,000 freight rate for Zurn PEX
orders, and $3,500 freight rate for combined Zurn products. Please see below
for specific policy details.
All sales are F.O.B. seller's location. Zurn will allow full freight allowance when
any of the following conditions are met: 1) any combination of Specification
Drainage, Commercial Drainage, Finish Plumbing or Zurn Wilkins orders of
$3,500 or more; 2) Linear Drainage and Chemical Drainage orders of $5,000
or more; 3) any Combination of Specification Drainage, Commercial Drainage,
Finish Plumbing, Zurn Wilkins, Linear Drainage and Chemical Drainage orders
of $5,000 or more; 4) Zurn One Systems orders of $7,500 or more; 5) fixture
only orders totaling $10,000 or more. This full freight allowance applies when
the shipment is within the continental United States and has a single destination
of a buyer's standard address or job location. Routing of shipment shall be
determined at the sole direction of Zurn. Shipping dates are estimates and
time of delivery shall not be of the essence of this sale contract. Under no
circumstances will the Seller have any responsibility on account of any delays
in manufacture, transportation, or otherwise. Terms of Export Shipment on
application.
NOTE: Any product dimension larger than 92" or any single item weighing more
than 3,500 pounds, shall be defined as an oversized and/or overweight product
and Zurn's standard FFA terms may not apply. Please contact our customer
service department for guidance on potential additional shipping charges.
These charges and restrictions apply in addition to Zurn standard terms and
conditions for sale unless otherwise agreed upon by the parties.
LIMITED WARRANTY
Zurn goods sold hereunder are warranted to be free from defects in material
and factory workmanship for the period of time from the date of purchase:
AquaVantage® Flush Valves, AquaFlush® Flush Valves, Commercial Fixtures,
Faucets, Showers, and Tubular Brass three years; Chemical Drainage, Linear
Drainage, Commercial Drainage, Specification Drainage, Zurn Wilkins, and Flush
Valve and Tubular Brass decorative finishes one year, PHIX® Cartridge ten years,
FOG-ceptor™ thirty years. Where permitted by law,
THE IMPLIED WARRANTY
OF MERCHANTABILITY IS LIMITED TO THE ABOVE IDENTIFIED PERIOD
OF TIME AND SHALL BE LIMITED SOLELY TO THE REPLACEMENT OF
THE DEFECTIVE GOODS. A damaged/broken test cock or ball valve is not
considered defective. Please contact Zurn Customer Care for assistance.
Zurn will replace goods at no cost that prove defective provided Zurn is notified
in writing of such defect and the goods are returned prepaid at the specified
Zurn location with evidence that they have been properly maintained and
used in accordance with instructions.
ZURN SHALL NOT BE RESPONSIBLE
FOR ANY LABOR CHARGES OR ANY LOSS, INJURY, OR DAMAGES
WHATSOEVER, INCLUDING, BUT NOT LIMITED TO, INCIDENTAL OR
CONSEQUENTIAL DAMAGES. The sole and exclusive remedy shall be limited
to the replacement of the defective goods. Before installation and use, the
purchaser shall determine the suitability of the product for his intended use
and the purchaser assumes all risk and liability whatever in the connection
therewith. All weights stated in Zurn catalogs and lists are approximate and are
not guaranteed.
RETURNED GOODS
Standard cataloged material may be returned only with written permission of
Zurn. Returned goods are subject to a 25% restocking charge of total saleable
material returned, plus cost of reconditioning, if necessary, to make material
sellable. Transportation charges are the responsibility of the Buyer. Credit
allowance will be in the form of merchandise credit only – not cash credit. The
value of the return must total at least $100.00 to qualify for credit allowance. No
credit will be allowed for parts unless originally ordered and invoiced as parts.
No credit will be allowed for discontinued or made-to-order items. Items that
have been specially made are not subject to return or cancellation except by
special negotiation. Material must be returned within one year of invoice date
for credit to be issued for Chemical Drainage, Linear Drainage, and Commercial
Drainage. Material must be returned within two years of invoice date for credit to
be issued for Commercial Fixtures, Flush Valve Products, Specification Drainage,
Tubular Brass, and Zurn Wilkins. No credit is allowed for Linear Drainage
products that have been cut and Specification Drainage product with auxiliary
tappings. Flush Valve material over two years old will be subject to a 50%
handling charge. Flush Valve material over five years old will not be accepted.
Commercial Drainage and Specification Drainage galvanized material will be
credited at value of Dura-Coated cast iron, and chrome plated at value of bronze.
Zurn Wilkins damaged/broken test cocks or ball valves are not considered
defective.
ILLUSTRATIONS OF TYPICAL INSTALLATIONS
The typical installations for various products found in each product section are
intended to illustrate the products and potential options for the use of these
products. Under no circumstances are they to be construed as recommended
installation procedures. Consult local codes and project specifications for proper
installation instructions.
SHORTAGE/DAMAGE CLAIMS
Notification of material shortages or incorrect filling of orders must be made to
Zurn within 10 days of receipt. No claims over three months old will be honored.
Buyer agrees to make all complaints for damage in transit or "short count"
directly to the carrier; before the contents are unloaded have the carrier agent's
acknowledgment of such damage noted on the bill of lading and to present to
the carrier its agent's acknowledgment of such damaged material with formal
claim covering said damage.
GENERAL
Zurn reserves the right to make changes in design or equipment of any item
or product without incurring any obligation on previously sold items, and to
discontinue items at any time, without notice. Possession of this Catalog or other
sales literature is not to be construed as an oer to sell. All orders are subject to
acceptance by Zurn. Catalog printed in U.S.A.
Zurn flush valves are designed to comply with Army Corp of Engineers and Naval
guide specifications, Military Specification MIL.V.29193 and Federal Specification
WWP541.
Zurn flush valves comply with the following standards: ASME A112.18.1/CSA
B125.1, A112.19.5, A112.19.2, A112.19.6, ASSE 1037 and 101 are listed by the
following agencies: Canadian Standards, IAPMO/UPC/CUPC, and CSA 125.3.
Zurn flush valves are manufactured from dezincification resistant alloys. For
additional compliances, contact Zurn Industries, LLC, Finish Plumbing Operation,
or 1-800-997-3876.
Zurn is not responsible for typographical errors. The contents of this guide are
subject to revision without notice.
© 2018 Zurn Industries, LLC Items in this Guide are covered by Patents
and Patents Pending. Registered Trademarks.