Specification

Rev. Date: 2/22/10 C.N. No. 110732
Dwg. No. 84486 Prod. No. QQE___GX
Dimensional Data: Inches and [mm] are subject to manufacturing tolerances and change without notice.
ZURN PEX
®
PLUMBING AND RADIANT HEATING SYSTEMS HWY 11 EAST, COMMERCE, TX, U.S.A. 75429 PHONE: [phone] FAX: [phone] WEBSITE: www.zurn.com
IN CANADA: ZURN INDUSTRIES LIMITED 3544 NASHUA DRIVE, MISSISSAUGA, ONTARIO L4V 1L2 PHONE: [phone] FAX: [phone]
Zurn PEX
®
XL-Low Lead Brass
Barb Elbow - QQE__GX
Specification Sheet
Tag ____________
Engineering Specification: Zurn PEX
®
XL-Low Lead Brass
Barb Elbow. The QQE__GX is used to make sharp 90° bends.
Manufactured from EcoBrass
®
,C69300. These fittings, as a sys-
tem with Zurn PEX
®
tube, are pressure rated at 160 PSI at 73°F,
100 PSI at 180°F, and 80 PSI at 200°F. These fittings are listed by
NSF as complying with the following standards: NSF/ANSI Stan-
dard 14, NSF/ANSI Standard 61 including Annex G, ASTM F877,
CSA B137.5, and ASTM F1807.
Accessories
___ QCLP3X 1/2" QickClamp
®
Crimp Ring
___ QCLP4X 3/4" QickClamp
®
Crimp Ring
___ QCLP5X 1" QickClamp
®
Crimp Ring
___ QCR3X 1/2" Copper Crimp Ring
___ QCR4X 3/4" Copper Crimp Ring
___ QCR5X 1" Copper Crimp Ring
___ QCR6X 1-1/4" Copper Crimp Ring
___ QCR7X 1-1/2" Copper Crimp Ring
___ QCR8X 2" Copper Crimp Ring
___ QSOET3X 1/2" Stainless Steel Crimp Ring
___ QSOET4X 3/4" Stainless Steel Crimp Ring
___ QSOET5X 1" Stainless Steel Crimp Ring
Part Number Description 'A' 'B' 'C' 'D'
QQE33GX 1/2" Barb x 1/2" Barb Elbow 1/2" Barb 1/2" Barb 1.21" [30.7] 1.20" [30.5]
QQE43GX 3/4" Barb x 1/2" Barb Elbow 3/4" Barb 1/2" Barb 1.44" [36.6] 1.20" [30.5]
QQE44GX 3/4" Barb x 3/4" Barb Elbow 3/4" Barb 3/4" Barb 1.44" [36.6] 1.43" [36.3]
QQE55GX 1" Barb x 1" Barb Elbow 1" Barb 1" Barb 1.86" [47.2] 1.82" [46.2]
QQE66GX 1-1/4" Barb x 1-1/4" Barb Elbow 1-1/4" Barb 1-1/4" Barb 2.46" [62.5] 2.46" [62.5]
QQE77GX 1-1/2" Barb x 1-1/2" Barb Elbow 1-1/2" Barb 1-1/2" Barb 2.68" [68.1] 2.68" [68.1]
QQE88GX 2" Barb x 2" Barb Elbow 2" Barb 2" Barb 3.44" [87.4] 3.44" [87.4]
'C'
'B'
'A'
'D'
NOTE: Barb geometry will vary depending upon barb size.