Installation Guide

Rev. F Date: 11/9/07 C.N. No.106882
Dwg. No. 92076 Product No. Z7300-SS-MT
AquaSpec
®
is a registered trademark of Zurn Industries, LLC
©2007 Zurn Industries, LLC
ZURN INDUSTRIES, LLC
♦♦
♦♦
♦ COMMERCIAL BRASS OPERATION
♦♦
♦♦
♦ 2640 SOUTH WORK STREET
♦♦
♦♦
♦ FALCONER NY 14733
Phone: [phone]
♦♦
♦♦
♦ Fax: [phone]
♦♦
♦♦
♦ World Wide Web: www.zurn.com
In Canada: ZURN INDUSTRIES LIMITED
♦♦
♦♦
♦ 3544 Nashua Drive
♦♦
♦♦
♦ Mississauga, Ontario L4V1L2
♦♦
♦♦
♦ Phone: [phone] Fax: [phone]
___________
TEMP-GARD III TUB and SHOWER VALVE
Z7300-SS-MT
TAG _______
ENGINEERING SPECIFICATIONS: ZURN Z7300-SS-MT
Single handle pressure balancing mixing tub and shower unit, ceramic control cartridge with
stainless steel balancing piston, built in reverse connection capability (To reverse the hot and
cold inlets simply remove cartridge and turn 180
o
), two service stops / check stops, and adjustable
limit stop. When valve is turned on it must rotate from cold through to the hot position. All
exposed trim and handle are metal with polished nickel chrome plated surface. The valve body is
a four port valve with a tub port plug included for shower only applications. The valve inlets,
shower and tub outlet are all standard with 1/2" NPT female thread connections. The 1/2" copper
sweat options must be specified as shown below.
OPTIONS (Check/specify appropriate options)Use with Z7300 prefix
Suffix Description
___ -CPVC 1/2" Male NPT by CPVC Female Adaptors, shipped loose to be
installed in the field
___ -EXT Extension Kit, Extends Valve Out by 1".
___ -PEX 1/2" Male NPT by PEX Adaptors, shipped loose to be installed
in the field.
___ -SSC 1/2" Female Copper Sweat Connections w/ Service Stops
___ -ST Sierra Series Decorative Metal Trim
___ -STN Sierra Series Decorative Metal Trim, in Satin Nickel Finish
___ -WF Wall Mounting Flange For Fiberglass or Panel Wall Installation
Note: All dimensions are for reference only. Do not use for pre-plumbing.
Parts shown as hidden lines are supplied by others.
Additional Options
___ Z7000-SC Pair of Dual Spring Check Valves
___ Z7000-T2 Diverter Tub Spout
___ Z7000-T2-SJ Tub Spout with Pull-Up Diverter and 1/2" Slip Joint Connection
___ Z7000-T4 Chrome Plated Cast Brass Tub Spout with Pull-Up Diverter and 1/2" Female IPS
STANDARDS
Tested to meet the following standards for
valves and plumbing fittings:
ASSE Standard No. 1016
ASME A112.18.1 / CSA B125.1
IAPMO
®
Listed
Meets or Exceeds ANSI A117.1M standard
for physically handicapped