Submittal Sheet

*REGULARLY FURNISHED UNLESS OTHERWISE SPECIFIED
Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice
ZURN INDUSTRIES, LLC.
♦♦
♦♦
♦ SPECIFICATION DRAINAGE OPERATION
♦♦
♦♦
♦ 1801 Pittsburgh Ave.
♦♦
♦♦
♦ Erie, PA 16514
Phone: [phone]
♦♦
♦♦
♦ Fax: [phone]
♦♦
♦♦
♦ World Wide Web: www.zurn.com
In Canada: ZURN INDUSTRIES LIMITED
♦♦
♦♦
♦ 3544 Nashua Drive
♦♦
♦♦
♦ Mississauga, Ontario L4V1L2
♦♦
♦♦
♦ Phone: [phone] Fax: [phone]
®
SPECIFICATION SHEET
TAG _______
OPTIONS (Check/specify appropriate option)
PREFIXES
____ Z Acid Resistant Coated Fabricated Steel*
____ ZS Type 304 Fabricated Stainless Steel
SUFFIXES
____ -CS Custom Screens (Specify material and perforation size required)
____ -E Acid Resistant Coated Interior and Exterior Fabricated Steel Extension Section.
____ -YR Replacement Stainless Steel Bucket Assembly
Z1183-FC
SOLIDS INTERCEPTOR W/ FLUSH COVER
ENGINEERING SPECIFICATION:
ZURN Z1183-FC
Large capacity acid resistant coated
interior and exterior fabricated steel,
or stainless steel solids interceptor,
for recessed installation with screen
attached to gasketed, non-skid
secured cover with removable lift
handle, and removable sediment
basket. Size to be used with corre-
sponding Z1170, Z1172 or Z1173
Grease Interceptors.
DWG. NO. 83455
REV. D
PRODUCT NO. Z1183-FC
DATE: 10/22/10 C.N. NO. 111954
Size
'A'
Inlet/Outlet
Size
Flow Rate
G.P.M.
[L]
Solids Cap.
Cubic Ft.
[m
3
]
100 2 [51] 4 [15] 0.20 [.006] 10 [254] 11-3/4 [298] 7-1/4 [184]
200 2 [51] 7 [26] 0.29 [.008] 11-1/8 [283] 13-3/4 [349] 8-1/8 [206]
300 2 [51] 10 [38] 0.33 [.009] 11-3/4 [298] 15-7/8 [403] 8-1/4 [210]
400 3 [76] 15 [57] 0.38 [.011] 13-3/8 [340] 18-5/8 [473] 9-3/8 [238]
500 3 [76] 20 [76] 0.66 [.019] 15 [381] 19-1/8 [488] 11-3/4 [298]
600 3 [76] 25 [95] 0.79 [.022] 17 [432] 21-3/4 [552] 12-7/16 [316]
700 3 [76] 35 [132] 1.17 [.033] 18-3/4 [476] 24-3/8 [619] 14-3/16 [360]
800 3 [76] 50 [189] 1.35 [.038] 21-1/8 [546] 24-3/8 [619] 16 [406]
900 3 [76] 75 [284] 1.61 [.046] 22-3/4 [578] 24-3/8 [619] 18-1/2 [470]
Dimensions In Inches
C G D/E
1200 4 [102] 150 [568] 2.11 [.060] 30-3/4 [781] 24-3/8 [619] 25-1/4 [641]
1000 3 [76] 100 [379] 1.8 [.051] 27 [686] 24-3/8 [619] 23 [584]
1100 3 [76] 125 [473] 1.95 [.055] 30-1/8 [765] 24-3/8 [619] 24-1/2 [622]