Instructions / Assembly

Model Z5615.270.00.00.00
1.28 gpf Elongated Wall Hung EcoVantage®
Battery Powered Sensor Flush Valve Toilet System
Meets the American Disabilities Guidelines and ANSI A117.1
requirements when installed according to these require-
ments.
Fixture dimensions meet ANSI/ASME standard A112.19.2
and CAN/CSA B45 requirements.
In Canada - Consult local codes and standards.
All dimensions and specifications are subject to change without
notice.
Zurn Industries, LLC
5900 Elwin Buchanan Drive, Sanford, NC U.S.A. 27330 · Ph. 1-800-997-3876, Fax 919-775-3541
In Canada
| Zurn Industries Limited
7900 Goreway Drive Unit 10, Brampton, Ontario L6T5W6 · Ph. 905-405-8272, Fax 905-405-1292
www.zurn.com
Rev. -
Date: 10/26/2017
C.N. No. SAN007892
Prod. | Dwg. No. 317198
EcoVantage® is a registered trademark of Zurn Industries
TAG ____________
This space is for Architectural/engineering Approval
Z5615 Series Elongated
Suffix Options:
-RF Retro-Fit Nut Kit for extending carrier
studs from existing wall.
Recommended Carrier:
Z1201 or Z1202 EZCarry
®
500 lbs load rated High
Efficiency Carrier
Recommended Trim:
Z5955SS-EL Elongated, standard white,
open front toilet seat less cover with stainless steel
check hinge.
Note: To ensure system performance:
Minimum Running Water Pressure = 25 psi.
This product should be used with a
WaterSense labeled counterpart with a
compatible flush volume to ensure that the
entire system meets the requirements for
water efficiency and performance.
Z5615 HET Series
Zurn One HET Toilet System designed for optimal
performance between Zurn fixture and Zurn flush valve to
save water.
1.28 gpf (gallons per flush) [4.8 Lpf]
20% water savings over standard 1.6 gpf [6.0Lpf] system
Vitreous china
Top Spud/Exposed System
Battery Powered Sensor Flush Valve Operation
Elongated front rim
2-1/8" fully glazed trapway
High efficiency siphon jet flush action
Zurn product system component compatibility
and quality assurance
Shipping Weight: 47 lbs.
Engineering Specification
Z5615.270 EcoVantage
®
High Efficiency Toilet System -
System comes complete with exposed ZER6000AV-HET-
CPM, high efficiency sensor operated battery powered
flushometer valve, and vitreous china wall-hung toilet. The
system is designed to perform to industry standards with
as little as 1.28 gallons per flush [4.8 Lpf]. Valve is
exposed, quiet diaphragm-type, chrome plated, flushometer
valve with a polished exterior, complete with Zurn’s
AquaVantage
®
TPE, chloramine resistant, dual seal
diaphragm with clog-resistant, filtered by-pass. The valve
incorporates a 7.6 VDC motor actuator, a battery powered
automatic sensor, high impact resistant polycarbonate
housing and chrome plated metal cover with manual override
push button and 10 degree angled sensor. The valve is
complete with high back pressure vacuum breaker, one
piece hex coupling nut, adjustable tailpiece, spud coupling
and flange for top spud connection. Control stop has
internal siphon-guard protection, vandal resistant stop cap,
sweat solder kit, and a cast wall flange with set screw.
Internal seals are made of chloramine resistant materials.
Vitreous china toilet is 1-1/2” top spud with 2-1/8” fully
glazed trapway with siphon jet action. Valve and toilet are
an engineered system designed to provide optimal
performance and 20% water savings over 1.6 gpf [6.0 Lpf]
conventional toilets.

Summary of content (2 pages)