Installation Guide

ManualsBrandsZurn ManualsBathSingle Hole Touchless Bathroom Faucet in Polished Chrome

LIMITED WARRANTY

All goods sold hereunder are warranted to be free from defects in material and factory workmanship for a period of three years from the

date of purchase. Decorative finishes warranted for one year. We will replace at no costs goods that prove defective provided we are

notified in writing of such defect and the goods are returned to us prepaid at Sanford, NC, with evidence that they have been properly

maintained and used in accordance with instructions. We shall not be responsible for any labor charges or any loss, injury or damages

whatsoever, including incidental or consequential damages. The sole and exclusive remedy shall be limited to the replacement of the

defective goods. Before installation and use, the purchaser shall determine the suitability of the product for his intended use and the

purchaser assumes all risk and liability whatever in connection therewith. Where permitted by law, the implied warranty of merchantability

is expressly excluded. If the products sold hereunder are “consumer products,” the implied warranty of merchantability is limited to a

period of three years and shall be limited solely to the replacement of the defective goods. All weights stated in our catalogs and lists are

approximate and are not guaranteed.

Sensor-Operated Battery-Powered

Lavatory Faucets

Z6913-XL

Z6915-XL

Z6913-XL

Z6915-XL

AquaSense

Z6913-XL and Z6915-XL Series

Sensor-Operated Lavatory Faucets

for Battery or Plug-In Installations.

Installation, Operation, Maintenance,

and Parts Manual

Patented and Patents Pending

Shown with -CP4 option

Summary of content (4 pages)

PAGE 1
AquaSense ® Z6913-XL and Z6915-XL Series ® Sensor-Operated Lavatory Faucets for Battery or Plug-In Installations. Installation, Operation, Maintenance, and Parts Manual Patented and Patents Pending Sensor-Operated Battery-Powered Lavatory Faucets Z6913-XL Z6915-XL Shown with -CP4 option Z6913-XL Z6915-XL LIMITED WARRANTY All goods sold hereunder are warranted to be free from defects in material and factory workmanship for a period of three years from the date of purchase.
PAGE 2
IMPORTANT: • ALL PLUMBING IS TO BE INSTALLED IN ACCORDANCE WITH APPLICABLE CODES AND REGULATIONS. • FLUSH ALL WATER LINES PRIOR TO INSTALLATION. • SENSOR UNITS SHOULD NOT BE LOCATED ACROSS FROM EACH OTHER OR IN CLOSE PROXIMITY TO HIGHLY REFLECTIVE SURFACES. 3.- Electronics Module Installation Attach sensor connector wire from the faucet to the mating sensor connector wire from the eletronics module. Orient connectors so that the pins are properly aligned before pressing connectors together.
PAGE 3
Z6913 and Z6915 Repair Kits Description 1 Z6913 Spout Assembly with Sensor 2 Z6915 Spout Assembly with Sensor 3 Electronics Box with Solenoid 4 Solenoid Rebuild Kit (Diaphram, plunger and plunger spring) 5 Filter Kit 6 Z6912 Base Plate Gasket 7 Z6913 Base Plate Gasket 8 Z6915 Base Plate Gasket 9 Mounting Kit 10 Filter Screen 11 Optional Plug-in Power Converter 12 Shank Connection Gasket 13 4” Cast Cover Plate w/Gasket 14 8” Cast Cover Plate w/Gasket 15 Mixing Tee w/Filtera and Back Checks 16 Mixing Valve w
PAGE 4
OPERATION SPECIFICATION Voltage: 6 VDC (4 “AA” Alkaline) Sensor Range: 6” Approximate Operating Water Pressure: 20-80 psi Ambient Temperature: 1.) Invisible light rays are continually emitted from the faucet sensor. 2.) When the user’s hands come into range of the sensor’s detection zone (factory set at approximately 6”), the beam is reflected back to the sensor’s reciever and converted to a low voltage electrical signal activating a solenoid valve. 3.