Installation Guide

FV563 Rev. F 5/9/2016
Page 5
2.2. IM assembly only: Connect Y cable to electronics modules.
2.3. Open battery module using supplied Allen wrench and install
supplied batteries in the electronics module.
2.3a. Optional ACA version: Connect supplied inline connector
and AC adapter.
2.3b. Optional HW6 (Hardwired 6V) version: Connect supplied
inline connector and hardwire adapter. When securing the CWB
wires to the screw terminals on HW6 unit, the BLACK WITH
DASHED MARKINGS should be connected to the Positive (+)
terminal, and the SOLID BLACK wire should be connected to the
Negative (-) terminal.
INLINE
CONNECTOR
-CWB
-HW6
ACA
MJ unit (sold separately)
Note: Do not connect more than 8 solenoids to a single transformer
-MJ
-HW6
18 AWG (MIN)
MAX LENGTH 40’
2.4. Tighten electronics module assembly to shank and connect
water line(s).