Specification Sheet

AquaSpec
®
is a registered trademark of Zurn Industries, LLC
©2007 Zurn Industries, LLC
ZURN INDUSTRIES, LLC
♦♦
♦♦
♦ COMMERCIAL BRASS OPERATION
♦♦
♦♦
♦ 2640 SOUTH WORK STREET
♦♦
♦♦
♦ FALCONER NY 14733
Phone: [phone]
♦♦
♦♦
♦ Fax: [phone]
♦♦
♦♦
♦ World Wide Web: www.zurn.com
In Canada: ZURN INDUSTRIES LIMITED
♦♦
♦♦
♦ 3544 Nashua Drive
♦♦
♦♦
♦ Mississauga, Ontario L4V1L2
♦♦
♦♦
♦ Phone: [phone] Fax: [phone]
Rev. B Date: 8/4/08 C.N. No. 107721
Dwg. No. 92356 Product No. Z7000-i9
____
TEMP-GARD INSTITUTIONAL SHOWER WALL
MOUNT W/ BALL JOINT SHOWER HEAD
Z7000-i9
TAG _______
OPTIONAL ACCESSORIES
Suffix Description
___ -AP Anchor Plate
___ -BP Base Plate
Note: All dimensions are for reference only. Do not use for pre-plumbing.
STANDARDS
Designed to meet the following standards
for valves and plumbing fittings:
ASME A112.18.1/CSA B125.1
Engineering Specifications: Zurn Z7000-i9
Chrome plated plastic shower head, chrome plated brass ball joint
connector, and bronze body institutional wall mount with hard
chrome plated finish. 1.5 GPM [5.7 L] flowrate with non-removable
flow compensator, which keeps flowrate constant regardless of water
pressure. Comes standard with 1/2" NPT female threaded inlet, outer
ring spray adjustment for coarse or soft message spray, and 4
mounting screws. Vandal resistant.