Specification Sheet

ManualsBrandsZurn ManualsShowersZurn Single Handle Pressure Balancing Mixing Shower Unit from the Temp-Gard I Series

Rev. B Date: 9/21/07 C.N. No. 106618

Dwg. No. 66221 Product No. Z7101-SS-LH

AquaSpec

is a registered trademark of Zurn Industries, LLC

ZURN INDUSTRIES, LLC

♦♦

♦ COMMERCIAL BRASS OPERATION

♦♦

♦ 2640 SOUTH WORK STREET

♦♦

♦ FALCONER NY 14733

Phone: 1-716-665-1132

♦♦

♦ Fax: 1-716-665-1135

♦♦

♦ World Wide Web: www.zurn.com

In Canada: ZURN INDUSTRIES LIMITED

♦♦

♦ 3544 Nashua Drive

♦♦

♦ Mississauga, Ontario L4V1L2

♦♦

♦ Phone: 905/405-8272 Fax: 905/405-1292

ENGINEERING SPECIFICATIONS: ZURN Z7101-SS-LH

Single handle pressure balancing mixing shower unit, with single bronze stem, stainless

steel balancing piston integral with stem assembly, metal lever handle, integral service stops

and brass adjustment limit stop screw in cap. Complete with double seal packing, adjustable

brass packing nut, and removable brass seats; all exposed trim with polished nickel chrome

plated surface. Valve supplied with standard shower head, arm, and flange. The valve inlets

and shower outlet are in 1/2" female copper sweat connections.

OPTIONS (Check/specify appropriate options) Use with Z7000 prefix

Suffix Description

__ -BC Back Connections (1/2") (For 90

Installations),

Shipped as Loose Adaptors, to be Installed in the Field

__ -CC Conversion Cover Plate

__ -DT Dial Thermometer

__ -IP 1/2" Female Threaded Connections, Shipped as Loose

Adaptors, to be Installed in the Field

__ -MT Metal Cover, Escutcheon & Stem Handle

__ -RC Reverse Connections (For Back-to-Back Installations)

__ -SC Pair of Dual Spring Check Valves

__ -STH ABS Chrome Plated Handle with Screw and Button

__ -WF Wall Mounting Flange For Fiberglass or Panel Wall Installation

___________________________________

TEMP-GARD SHOWER UNIT

Z7101-SS-LH

TAG _______

Note: All dimensions are for reference only. Do not use for pre-plumbing

STANDARDS

Tested to meet the following standards for

valves and plumbing fittings:

ASSE Standard No. 1016

CSA Standard B125-M89

Shower heads meet ANSI A112.18.1

Meets or Exceeds ANSI A117.1M standard

for physically handicapped

Summary of content (1 pages)

PAGE 1
___________________________________ TEMP-GARD SHOWER UNIT Z7101-SS-LH TAG _______ ENGINEERING SPECIFICATIONS: ZURN Z7101-SS-LH Single handle pressure balancing mixing shower unit, with single bronze stem, stainless steel balancing piston integral with stem assembly, metal lever handle, integral service stops and brass adjustment limit stop screw in cap. Complete with double seal packing, adjustable brass packing nut, and removable brass seats; all exposed trim with polished nickel chrome plated surface.