Specification Sheet

Rev. D Date: 9/24/08 C.N. No. 107870
Dwg. No. 66229 Product No. Z7121-SS-LH
______________________________
TEMP-GARD SHOWER UNIT
Z7121-SS-LH
TAG _______
AquaSpec
®
is a registered trademark of Zurn Industries, LLC
©2007 Zurn Industries, LLC
ZURN INDUSTRIES, LLC
♦♦
♦♦
♦ COMMERCIAL BRASS OPERATION
♦♦
♦♦
♦ 2640 SOUTH WORK STREET
♦♦
♦♦
♦ FALCONER NY 14733
Phone: [phone]
♦♦
♦♦
♦ Fax: [phone]
♦♦
♦♦
♦ World Wide Web: www.zurn.com
In Canada: ZURN INDUSTRIES LIMITED
♦♦
♦♦
♦ 3544 Nashua Drive
♦♦
♦♦
♦ Mississauga, Ontario L4V1L2
♦♦
♦♦
♦ Phone: [phone] Fax: [phone]
ENGINEERING SPECIFICATIONS: ZURN Z7121-SS-LH
Single handle pressure balancing mixing shower unit with volume control, single
bronze stem, stainless steel balancing piston integral with stem assembly, metal
lever handle, integral service stops, and brass adjustment limit stop screw in
cap. Complete with double seal packing, adjustable brass packing nut, and
removable brass seats; all exposed trim with polished nickel chrome plated
surface. Valve supplied with standard shower head, arm and flange. The hot and
cold inlets and shower outlet are in 1/2" female copper sweat connections.
OPTIONS (Check/specify appropriate options) Use with Z7000 prefix
Suffix Description
___ -BC Back Connections (1/2") (For 90
o
Installations),
Shipped as Loose Adaptors, to be Installed in the Field
___ -CC Conversion Cover Plate
___ -DT Dial Thermometer
___ -IP 1/2" Female Threaded Connections, Shipped as Loose
Adaptors, to be Installed in the Field
___ -MT Metal Cover, Escutcheon & Stem Handle
___ -RC Reverse Connections (For Back-to-Back Installations)
___ -SC Pair of Dual Spring Check Valves
___ -STH ABS Chrome Plated Handle with Screw and Button
___ -WF Wall Mounting Flange For Fiberglass or Panel Wall Installation
Note: All dimensions are for reference only. Do not use for pre-plumbing
STANDARDS
Tested to meet the following standards for
valves and plumbing fittings:
ASSE Standard No. 1016
CSA Standard B125-M89
Shower heads meet ANSI A112.18.1
Meets or Exceeds ANSI A117.1M standard
for physically handicapped