Specification Sheet

Rev. C Date: 9/26/07 C.N. No. 106658
Dwg. No. 66235 Product No. Z7200-SS-LH
_____________
TEMP-GARD TUB and SHOWER VALVE
Z7200-SS-LH
TAG _______
AquaSpec
®
is a registered trademark of Zurn Industries, LLC
©2007 Zurn Industries, LLC
ZURN INDUSTRIES, LLC.
♦♦
♦♦
♦ COMMERCIAL BRASS OPERATION
♦♦
♦♦
♦ 2640 SOUTH WORK STREET
♦♦
♦♦
♦ FALCONER NY 14733
Phone: [phone]
♦♦
♦♦
♦ Fax: [phone]
♦♦
♦♦
♦ World Wide Web: www.zurn.com
In Canada: ZURN INDUSTRIES LIMITED
♦♦
♦♦
♦ 3544 Nashua Drive
♦♦
♦♦
♦ Mississauga, Ontario L4V1L2
♦♦
♦♦
♦ Phone: [phone] Fax: [phone]
ENGINEERING SPECIFICATIONS: ZURN Z7200-SS-LH
Single handle pressure balancing mixing tub and shower valve, with single bronze
stem, stainless steel balancing piston integral with stem assembly, metal lever
handle, integral service stops, and brass adjustment limit stop screw in cap.
Complete with double seal packing, adjustable brass packing nut, and removable
brass seats; all exposed trim with polished nickel chrome plated surface. All four
valve ports are 1/2" female copper sweat connections.
OPTIONS (Check/specify appropriate options)Use with Z7000 prefix
Suffix Description
____ -BC Back Connections (1/2") (for 90
o
Installations),
Shipped as Loose Adaptors, to be Installed in the Field
____ -CC Conversion Cover Plate
____ -IP 1/2" Female Threaded Connection, Shipped as
Loose Adaptors, to be Installed in the Field
____ -MT Metal Cover, Escutcheon & Stem Handle
____ -RC Reverse Connections (For Back-to-Back Installations)
____ -SC Pair of Dual Spring Check Valves
____ -STH ABS Chrome Plated Handle with Screw and Button
____ -WF Wall Mounting Flange for Fiberglass or Panel Wall Installation
Note: All dimensions are for reference only. Do not use for pre-plumbing
STANDARDS
Tested to meet the following standards for
valves and plumbing fittings:
ASSE Standard No. 1016
CSA Standard B125-M89
Shower heads meet ANSI A112.18.1
Meets or Exceeds ANSI A117.1M standard
for physically handicapped